Subject: [PATCH v5] documentation: add tutorial for object walking

From: Emily Shaffer <[email-masked]>
Date: Thu, 10 Oct 2019 08:19:32 -0700

The target audience is a Git contributor who is just getting started
with the concept of object walking. The goal is to prepare this
contributor to be able to understand and modify existing commands which
perform revision walks more easily, although it will also prepare
contributors to create new commands which perform walks.

The tutorial covers a basic overview of the structs involved during
object walk, setting up a basic commit walk, setting up a basic
all-object walk, and adding some configuration changes to both walk
types. It intentionally does not cover how to create new commands or
search for options from the command line or gitconfigs.

There is an associated patchset at
https://github.com/nasamuffin/git/tree/revwalk that contains a reference
implementation of the code generated by this tutorial.

Signed-off-by: Emily Shaffer <[email-masked]>
Helped-by: Eric Sunshine <[email-masked]>
---
Primarily since v5 this is a reword to try to frame the tutorial as
"object walk tutorial which also covers commit-only walk", rather than
"revision walk tutorial which also covers all-object walk" - per Junio's
suggestion.

Since I had spent some time away from the patch, I also made some small
changes to the wording.

Here's the rangediff from gitster/es/walken-tutorial:

1:  1ed29a34d1 ! 1:  554d940af7 documentation: add tutorial for revision walking
     a => b | 0
     1 file changed, 0 insertions(+), 0 deletions(-)
    
    @@ Metadata
     Author: Emily Shaffer <[email-masked]>
     
      ## Commit message ##
    -    documentation: add tutorial for revision walking
    +    documentation: add tutorial for object walking
     
    -    Existing documentation on revision walks seems to be primarily intended
    +    Existing documentation on object walks seems to be primarily intended
         as a reference for those already familiar with the procedure. This
         tutorial attempts to give an entry-level guide to a couple of bare-bones
    -    revision walks so that new Git contributors can learn the concepts
    +    object walks so that new Git contributors can learn the concepts
         without having to wade through options parsing or special casing.
     
         The target audience is a Git contributor who is just getting started
    -    with the concept of revision walking. The goal is to prepare this
    +    with the concept of object walking. The goal is to prepare this
         contributor to be able to understand and modify existing commands which
         perform revision walks more easily, although it will also prepare
         contributors to create new commands which perform walks.
     
         The tutorial covers a basic overview of the structs involved during
    -    revision walk, setting up a basic commit walk, setting up a basic
    +    object walk, setting up a basic commit walk, setting up a basic
         all-object walk, and adding some configuration changes to both walk
         types. It intentionally does not cover how to create new commands or
         search for options from the command line or gitconfigs.
    @@ Commit message
     
         Signed-off-by: Emily Shaffer <[email-masked]>
         Helped-by: Eric Sunshine <[email-masked]>
    -    Signed-off-by: Junio C Hamano <[email-masked]>
     
      ## Documentation/Makefile ##
     @@ Documentation/Makefile: API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technica
    @@ Documentation/Makefile: API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api
      TECH_DOCS += technical/hash-function-transition
      TECH_DOCS += technical/http-protocol
     
    - ## Documentation/MyFirstRevWalk.txt (new) ##
    + ## Documentation/MyFirstObjectWalk.txt (new) ##
     @@
    -+My First Revision Walk
    ++My First Object Walk
     +======================
     +
    -+== What's a Revision Walk?
    ++== What's an Object Walk?
     +
    -+The revision walk is a key concept in Git - this is the process that underpins
    ++The object walk is a key concept in Git - this is the process that underpins
     +operations like `git log`, `git blame`, and `git reflog`. Beginning at HEAD, the
     +list of objects is found by walking parent relationships between objects. The
    -+revision walk can also be used to determine whether or not a given object is
    ++object walk can also be used to determine whether or not a given object is
     +reachable from the current HEAD pointer.
     +
    ++A related concept is the revision walk, which is focused on commit objects and
    ++their relationships.
    ++
     +=== Related Reading
     +
     +- `Documentation/user-manual.txt` under "Hacking Git" contains some coverage of
     +  the revision walker in its various incarnations.
     +- `Documentation/technical/api-revision-walking.txt`
     +- https://eagain.net/articles/git-for-computer-scientists/[Git for Computer Scientists]
    -+  gives a good overview of the types of objects in Git and what your revision
    ++  gives a good overview of the types of objects in Git and what your object
     +  walk is really describing.
     +
     +== Setting Up
    @@ Documentation/MyFirstRevWalk.txt (new)
     +/*
     + * "git walken"
     + *
    -+ * Part of the "My First Revision Walk" tutorial.
    ++ * Part of the "My First Object Walk" tutorial.
     + */
     +
     +#include "builtin.h"
    @@ Documentation/MyFirstRevWalk.txt (new)
     +
     +Per entry, we find:
     +
    -+`item` is the object provided upon which to base the revision walk. Items in Git
    ++`item` is the object provided upon which to base the object walk. Items in Git
     +can be blobs, trees, commits, or tags. (See `Documentation/gittutorial-2.txt`.)
     +
     +`name` is the object ID (OID) of the object - a hex string you may be familiar
    @@ Documentation/MyFirstRevWalk.txt (new)
     +
     +First, let's see if we can replicate the output of `git log --oneline`. We'll
     +refer back to the implementation frequently to discover norms when performing
    -+a revision walk of our own.
    ++an object walk of our own.
     +
     +To do so, we'll first find all the commits, in order, which preceded the current
     +commit. We'll extract the name and subject of the commit from each.
    @@ Documentation/MyFirstRevWalk.txt (new)
     +
     +=== Setting Up
     +
    -+Preparing for your revision walk has some distinct stages.
    ++Preparing for your object walk has some distinct stages.
     +
     +1. Perform default setup for this mode, and others which may be invoked.
     +2. Check configuration files for relevant settings.
    @@ Documentation/MyFirstRevWalk.txt (new)
     +`grep` and `diff` to initialize themselves by calling each of their
     +initialization functions.
     +
    -+For our purposes, within `git walken`, for the first example we don't intend to
    -+use any other components within Git, and we don't have any configuration to do.
    -+However, we may want to add some later, so for now, we can add an empty
    -+placeholder. Create a new function in `builtin/walken.c`:
    ++For our first example within `git walken`, we don't intend to use any other
    ++components within Git, and we don't have any configuration to do.  However, we
    ++may want to add some later, so for now, we can add an empty placeholder. Create
    ++a new function in `builtin/walken.c`:
     +
     +----
     +static void init_walken_defaults(void)
    @@ Documentation/MyFirstRevWalk.txt (new)
     +}
     +----
     +
    -+// TODO: Checking CLI options
    -+
     +==== Setting Up `rev_info`
     +
     +Now that we've gathered external configuration and options, it's time to
    @@ Documentation/MyFirstRevWalk.txt (new)
     +	 */
     +	get_commit_format("oneline", rev);
     +
    -+	/* Start our revision walk at HEAD. */
    ++	/* Start our object walk at HEAD. */
     +	add_head_to_pending(rev);
     +}
     +----
    @@ Documentation/MyFirstRevWalk.txt (new)
     +
     +There are a few ways that we can change the order of the commits during a
     +revision walk. Firstly, we can use the `enum rev_sort_order` to choose from some
    -+sane orderings.
    ++typical orderings.
     +
     +`topo_order` is the same as `git log --topo-order`: we avoid showing a parent
     +before all of its children have been shown, and we avoid mixing commits which
    @@ Documentation/MyFirstRevWalk.txt (new)
     +We also have the capability to enumerate all objects which were omitted by a
     +filter, like with `git log --filter=<spec> --filter-print-omitted`. Asking
     +`traverse_commit_list_filtered()` to populate the `omitted` list means that our
    -+revision walk does not perform any better than an unfiltered revision walk; all
    ++object walk does not perform any better than an unfiltered object walk; all
     +reachable objects are walked in order to populate the list.
     +
     +First, add the `struct oidset` and related items we will use to iterate it:

<end rangediff>

 Documentation/Makefile              |   1 +
 Documentation/MyFirstObjectWalk.txt | 905 ++++++++++++++++++++++++++++
 2 files changed, 906 insertions(+)
 create mode 100644 Documentation/MyFirstObjectWalk.txt

diff --git a/Documentation/Makefile b/Documentation/Makefile
index 06d85ad958..fc35cb29b1 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -77,6 +77,7 @@ API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technica
 SP_ARTICLES += $(API_DOCS)
 
 TECH_DOCS += MyFirstContribution
+TECH_DOCS += MyFirstRevWalk
 TECH_DOCS += SubmittingPatches
 TECH_DOCS += technical/hash-function-transition
 TECH_DOCS += technical/http-protocol
diff --git a/Documentation/MyFirstObjectWalk.txt b/Documentation/MyFirstObjectWalk.txt
new file mode 100644
index 0000000000..7085f17072
--- /dev/null
+++ b/Documentation/MyFirstObjectWalk.txt
@@ -0,0 +1,905 @@
+My First Object Walk
+======================
+
+== What's an Object Walk?
+
+The object walk is a key concept in Git - this is the process that underpins
+operations like `git log`, `git blame`, and `git reflog`. Beginning at HEAD, the
+list of objects is found by walking parent relationships between objects. The
+object walk can also be used to determine whether or not a given object is
+reachable from the current HEAD pointer.
+
+A related concept is the revision walk, which is focused on commit objects and
+their relationships.
+
+=== Related Reading
+
+- `Documentation/user-manual.txt` under "Hacking Git" contains some coverage of
+  the revision walker in its various incarnations.
+- `Documentation/technical/api-revision-walking.txt`
+- https://eagain.net/articles/git-for-computer-scientists/[Git for Computer Scientists]
+  gives a good overview of the types of objects in Git and what your object
+  walk is really describing.
+
+== Setting Up
+
+Create a new branch from `master`.
+
+----
+git checkout -b revwalk origin/master
+----
+
+We'll put our fiddling into a new command. For fun, let's name it `git walken`.
+Open up a new file `builtin/walken.c` and set up the command handler:
+
+----
+/*
+ * "git walken"
+ *
+ * Part of the "My First Object Walk" tutorial.
+ */
+
+#include "builtin.h"
+
+int cmd_walken(int argc, const char **argv, const char *prefix)
+{
+	trace_printf(_("cmd_walken incoming...\n"));
+	return 0;
+}
+----
+
+NOTE: `trace_printf()` differs from `printf()` in that it can be turned on or
+off at runtime. For the purposes of this tutorial, we will write `walken` as
+though it is intended for use as a "plumbing" command: that is, a command which
+is used primarily in scripts, rather than interactively by humans (a "porcelain"
+command). So we will send our debug output to `trace_printf()` instead. When
+running, enable trace output by setting the environment variable `GIT_TRACE`.
+
+Add usage text and `-h` handling, like all subcommands should consistently do
+(our test suite will notice and complain if you fail to do so).
+
+----
+int cmd_walken(int argc, const char **argv, const char *prefix)
+{
+	const char * const walken_usage[] = {
+		N_("git walken"),
+		NULL,
+	}
+	struct option options[] = {
+		OPT_END()
+	};
+
+	argc = parse_options(argc, argv, prefix, options, walken_usage, 0);
+
+	...
+}
+----
+
+Also add the relevant line in `builtin.h` near `cmd_whatchanged()`:
+
+----
+int cmd_walken(int argc, const char **argv, const char *prefix);
+----
+
+Include the command in `git.c` in `commands[]` near the entry for `whatchanged`,
+maintaining alphabetical ordering:
+
+----
+{ "walken", cmd_walken, RUN_SETUP },
+----
+
+Add it to the `Makefile` near the line for `builtin/worktree.o`:
+
+----
+BUILTIN_OBJS += builtin/walken.o
+----
+
+Build and test out your command, without forgetting to ensure the `DEVELOPER`
+flag is set, and with `GIT_TRACE` enabled so the debug output can be seen:
+
+----
+$ echo DEVELOPER=1 >>config.mak
+$ make
+$ GIT_TRACE=1 ./bin-wrappers/git walken
+----
+
+NOTE: For a more exhaustive overview of the new command process, take a look at
+`Documentation/MyFirstContribution.txt`.
+
+NOTE: A reference implementation can be found at
+https://github.com/nasamuffin/git/tree/revwalk.
+
+=== `struct rev_cmdline_info`
+
+The definition of `struct rev_cmdline_info` can be found in `revision.h`.
+
+This struct is contained within the `rev_info` struct and is used to reflect
+parameters provided by the user over the CLI.
+
+`nr` represents the number of `rev_cmdline_entry` present in the array.
+
+`alloc` is used by the `ALLOC_GROW` macro. Check
+`Documentation/technical/api-allocation-growing.txt` - this variable is used to
+track the allocated size of the list.
+
+Per entry, we find:
+
+`item` is the object provided upon which to base the object walk. Items in Git
+can be blobs, trees, commits, or tags. (See `Documentation/gittutorial-2.txt`.)
+
+`name` is the object ID (OID) of the object - a hex string you may be familiar
+with from using Git to organize your source in the past. Check the tutorial
+mentioned above towards the top for a discussion of where the OID can come
+from.
+
+`whence` indicates some information about what to do with the parents of the
+specified object. We'll explore this flag more later on; take a look at
+`Documentation/revisions.txt` to get an idea of what could set the `whence`
+value.
+
+`flags` are used to hint the beginning of the revision walk and are the first
+block under the `#include`s in `revision.h`. The most likely ones to be set in
+the `rev_cmdline_info` are `UNINTERESTING` and `BOTTOM`, but these same flags
+can be used during the walk, as well.
+
+=== `struct rev_info`
+
+This one is quite a bit longer, and many fields are only used during the walk
+by `revision.c` - not configuration options. Most of the configurable flags in
+`struct rev_info` have a mirror in `Documentation/rev-list-options.txt`. It's a
+good idea to take some time and read through that document.
+
+== Basic Commit Walk
+
+First, let's see if we can replicate the output of `git log --oneline`. We'll
+refer back to the implementation frequently to discover norms when performing
+an object walk of our own.
+
+To do so, we'll first find all the commits, in order, which preceded the current
+commit. We'll extract the name and subject of the commit from each.
+
+Ideally, we will also be able to find out which ones are currently at the tip of
+various branches.
+
+=== Setting Up
+
+Preparing for your object walk has some distinct stages.
+
+1. Perform default setup for this mode, and others which may be invoked.
+2. Check configuration files for relevant settings.
+3. Set up the `rev_info` struct.
+4. Tweak the initialized `rev_info` to suit the current walk.
+5. Prepare the `rev_info` for the walk.
+6. Iterate over the objects, processing each one.
+
+==== Default Setups
+
+Before examining configuration files which may modify command behavior, set up
+default state for switches or options your command may have. If your command
+utilizes other Git components, ask them to set up their default states as well.
+For instance, `git log` takes advantage of `grep` and `diff` functionality, so
+its `init_log_defaults()` sets its own state (`decoration_style`) and asks
+`grep` and `diff` to initialize themselves by calling each of their
+initialization functions.
+
+For our first example within `git walken`, we don't intend to use any other
+components within Git, and we don't have any configuration to do.  However, we
+may want to add some later, so for now, we can add an empty placeholder. Create
+a new function in `builtin/walken.c`:
+
+----
+static void init_walken_defaults(void)
+{
+	/*
+	 * We don't actually need the same components `git log` does; leave this
+	 * empty for now.
+	 */
+}
+----
+
+Make sure to add a line invoking it inside of `cmd_walken()`.
+
+----
+int cmd_walken(int argc, const char **argv, const char *prefix)
+{
+	init_walken_defaults();
+}
+----
+
+==== Configuring From `.gitconfig`
+
+Next, we should have a look at any relevant configuration settings (i.e.,
+settings readable and settable from `git config`). This is done by providing a
+callback to `git_config()`; within that callback, you can also invoke methods
+from other components you may need that need to intercept these options. Your
+callback will be invoked once per each configuration value which Git knows about
+(global, local, worktree, etc.).
+
+Similarly to the default values, we don't have anything to do here yet
+ourselves; however, we should call `git_default_config()` if we aren't calling
+any other existing config callbacks.
+
+Add a new function to `builtin/walken.c`:
+
+----
+static int git_walken_config(const char *var, const char *value, void *cb)
+{
+	/*
+	 * For now, we don't have any custom configuration, so fall back to
+	 * the default config.
+	 */
+	return git_default_config(var, value, cb);
+}
+----
+
+Make sure to invoke `git_config()` with it in your `cmd_walken()`:
+
+----
+int cmd_walken(int argc, const char **argv, const char *prefix)
+{
+	...
+
+	git_config(git_walken_config, NULL);
+
+	...
+}
+----
+
+==== Setting Up `rev_info`
+
+Now that we've gathered external configuration and options, it's time to
+initialize the `rev_info` object which we will use to perform the walk. This is
+typically done by calling `repo_init_revisions()` with the repository you intend
+to target, as well as the `prefix` argument of `cmd_walken` and your `rev_info`
+struct.
+
+Add the `struct rev_info` and the `repo_init_revisions()` call:
+----
+int cmd_walken(int argc, const char **argv, const char *prefix)
+{
+	/* This can go wherever you like in your declarations.*/
+	struct rev_info rev;
+	...
+
+	/* This should go after the git_config() call. */
+	repo_init_revisions(the_repository, &rev, prefix);
+
+	...
+}
+----
+
+==== Tweaking `rev_info` For the Walk
+
+We're getting close, but we're still not quite ready to go. Now that `rev` is
+initialized, we can modify it to fit our needs. This is usually done within a
+helper for clarity, so let's add one:
+
+----
+static void final_rev_info_setup(struct rev_info *rev)
+{
+	/*
+	 * We want to mimic the appearance of `git log --oneline`, so let's
+	 * force oneline format.
+	 */
+	get_commit_format("oneline", rev);
+
+	/* Start our object walk at HEAD. */
+	add_head_to_pending(rev);
+}
+----
+
+[NOTE]
+====
+Instead of using the shorthand `add_head_to_pending()`, you could do
+something like this:
+----
+	struct setup_revision_opt opt;
+
+	memset(&opt, 0, sizeof(opt));
+	opt.def = "HEAD";
+	opt.revarg_opt = REVARG_COMMITTISH;
+	setup_revisions(argc, argv, rev, &opt);
+----
+Using a `setup_revision_opt` gives you finer control over your walk's starting
+point.
+====
+
+Then let's invoke `final_rev_info_setup()` after the call to
+`repo_init_revisions()`:
+
+----
+int cmd_walken(int argc, const char **argv, const char *prefix)
+{
+	...
+
+	final_rev_info_setup(&rev);
+
+	...
+}
+----
+
+Later, we may wish to add more arguments to `final_rev_info_setup()`. But for
+now, this is all we need.
+
+==== Preparing `rev_info` For the Walk
+
+Now that `rev` is all initialized and configured, we've got one more setup step
+before we get rolling. We can do this in a helper, which will both prepare the
+`rev_info` for the walk, and perform the walk itself. Let's start the helper
+with the call to `prepare_revision_walk()`, which can return an error without
+dying on its own:
+
+----
+static void walken_commit_walk(struct rev_info *rev)
+{
+	if (prepare_revision_walk(rev))
+		die(_("revision walk setup failed"));
+}
+----
+
+NOTE: `die()` prints to `stderr` and exits the program. Since it will print to
+`stderr` it's likely to be seen by a human, so we will localize it.
+
+==== Performing the Walk!
+
+Finally! We are ready to begin the walk itself. Now we can see that `rev_info`
+can also be used as an iterator; we move to the next item in the walk by using
+`get_revision()` repeatedly. Add the listed variable declarations at the top and
+the walk loop below the `prepare_revision_walk()` call within your
+`walken_commit_walk()`:
+
+----
+static void walken_commit_walk(struct rev_info *rev)
+{
+	struct commit *commit;
+	struct strbuf prettybuf = STRBUF_INIT;
+
+	...
+
+	while ((commit = get_revision(rev))) {
+		if (!commit)
+			continue;
+
+		strbuf_reset(&prettybuf);
+		pp_commit_easy(CMIT_FMT_ONELINE, commit, &prettybuf);
+		puts(prettybuf.buf);
+	}
+	strbuf_release(&prettybuf);
+}
+----
+
+NOTE: `puts()` prints a `char*` to `stdout`. Since this is the part of the
+command we expect to be machine-parsed, we're sending it directly to stdout.
+
+Give it a shot.
+
+----
+$ make
+$ ./bin-wrappers/git walken
+----
+
+You should see all of the subject lines of all the commits in
+your tree's history, in order, ending with the initial commit, "Initial revision
+of "git", the information manager from hell". Congratulations! You've written
+your first revision walk. You can play with printing some additional fields
+from each commit if you're curious; have a look at the functions available in
+`commit.h`.
+
+=== Adding a Filter
+
+Next, let's try to filter the commits we see based on their author. This is
+equivalent to running `git log --author=<pattern>`. We can add a filter by
+modifying `rev_info.grep_filter`, which is a `struct grep_opt`.
+
+First some setup. Add `init_grep_defaults()` to `init_walken_defaults()` and add
+`grep_config()` to `git_walken_config()`:
+
+----
+static void init_walken_defaults(void)
+{
+	init_grep_defaults(the_repository);
+}
+
+...
+
+static int git_walken_config(const char *var, const char *value, void *cb)
+{
+	grep_config(var, value, cb);
+	return git_default_config(var, value, cb);
+}
+----
+
+Next, we can modify the `grep_filter`. This is done with convenience functions
+found in `grep.h`. For fun, we're filtering to only commits from folks using a
+`gmail.com` email address - a not-very-precise guess at who may be working on
+Git as a hobby. Since we're checking the author, which is a specific line in the
+header, we'll use the `append_header_grep_pattern()` helper. We can use
+the `enum grep_header_field` to indicate which part of the commit header we want
+to search.
+
+In `final_rev_info_setup()`, add your filter line:
+
+----
+static void final_rev_info_setup(int argc, const char **argv,
+		const char *prefix, struct rev_info *rev)
+{
+	...
+
+	append_header_grep_pattern(&rev->grep_filter, GREP_HEADER_AUTHOR,
+		"gmail");
+	compile_grep_patterns(&rev->grep_filter);
+
+	...
+}
+----
+
+`append_header_grep_pattern()` adds your new "gmail" pattern to `rev_info`, but
+it won't work unless we compile it with `compile_grep_patterns()`.
+
+NOTE: If you are using `setup_revisions()` (for example, if you are passing a
+`setup_revision_opt` instead of using `add_head_to_pending()`), you don't need
+to call `compile_grep_patterns()` because `setup_revisions()` calls it for you.
+
+NOTE: We could add the same filter via the `append_grep_pattern()` helper if we
+wanted to, but `append_header_grep_pattern()` adds the `enum grep_context` and
+`enum grep_pat_token` for us.
+
+=== Changing the Order
+
+There are a few ways that we can change the order of the commits during a
+revision walk. Firstly, we can use the `enum rev_sort_order` to choose from some
+typical orderings.
+
+`topo_order` is the same as `git log --topo-order`: we avoid showing a parent
+before all of its children have been shown, and we avoid mixing commits which
+are in different lines of history. (`git help log`'s section on `--topo-order`
+has a very nice diagram to illustrate this.)
+
+Let's see what happens when we run with `REV_SORT_BY_COMMIT_DATE` as opposed to
+`REV_SORT_BY_AUTHOR_DATE`. Add the following:
+
+----
+static void final_rev_info_setup(int argc, const char **argv,
+		const char *prefix, struct rev_info *rev)
+{
+	...
+
+	rev->topo_order = 1;
+	rev->sort_order = REV_SORT_BY_COMMIT_DATE;
+
+	...
+}
+----
+
+Let's output this into a file so we can easily diff it with the walk sorted by
+author date.
+
+----
+$ make
+$ ./bin-wrappers/git walken > commit-date.txt
+----
+
+Then, let's sort by author date and run it again.
+
+----
+static void final_rev_info_setup(int argc, const char **argv,
+		const char *prefix, struct rev_info *rev)
+{
+	...
+
+	rev->topo_order = 1;
+	rev->sort_order = REV_SORT_BY_AUTHOR_DATE;
+
+	...
+}
+----
+
+----
+$ make
+$ ./bin-wrappers/git walken > author-date.txt
+----
+
+Finally, compare the two. This is a little less helpful without object names or
+dates, but hopefully we get the idea.
+
+----
+$ diff -u commit-date.txt author-date.txt
+----
+
+This display indicates that commits can be reordered after they're written, for
+example with `git rebase`.
+
+Let's try one more reordering of commits. `rev_info` exposes a `reverse` flag.
+Set that flag somewhere inside of `final_rev_info_setup()`:
+
+----
+static void final_rev_info_setup(int argc, const char **argv, const char *prefix,
+		struct rev_info *rev)
+{
+	...
+
+	rev->reverse = 1;
+
+	...
+}
+----
+
+Run your walk again and note the difference in order. (If you remove the grep
+pattern, you should see the last commit this call gives you as your current
+HEAD.)
+
+== Basic Object Walk
+
+So far we've been walking only commits. But Git has more types of objects than
+that! Let's see if we can walk _all_ objects, and find out some information
+about each one.
+
+We can base our work on an example. `git pack-objects` prepares all kinds of
+objects for packing into a bitmap or packfile. The work we are interested in
+resides in `builtins/pack-objects.c:get_object_list()`; examination of that
+function shows that the all-object walk is being performed by
+`traverse_commit_list()` or `traverse_commit_list_filtered()`. Those two
+functions reside in `list-objects.c`; examining the source shows that, despite
+the name, these functions traverse all kinds of objects. Let's have a look at
+the arguments to `traverse_commit_list_filtered()`, which are a superset of the
+arguments to the unfiltered version.
+
+- `struct list_objects_filter_options *filter_options`: This is a struct which
+  stores a filter-spec as outlined in `Documentation/rev-list-options.txt`.
+- `struct rev_info *revs`: This is the `rev_info` used for the walk.
+- `show_commit_fn show_commit`: A callback which will be used to handle each
+  individual commit object.
+- `show_object_fn show_object`: A callback which will be used to handle each
+  non-commit object (so each blob, tree, or tag).
+- `void *show_data`: A context buffer which is passed in turn to `show_commit`
+  and `show_object`.
+- `struct oidset *omitted`: A linked-list of object IDs which the provided
+  filter caused to be omitted.
+
+It looks like this `traverse_commit_list_filtered()` uses callbacks we provide
+instead of needing us to call it repeatedly ourselves. Cool! Let's add the
+callbacks first.
+
+For the sake of this tutorial, we'll simply keep track of how many of each kind
+of object we find. At file scope in `builtin/walken.c` add the following
+tracking variables:
+
+----
+static int commit_count;
+static int tag_count;
+static int blob_count;
+static int tree_count;
+----
+
+Commits are handled by a different callback than other objects; let's do that
+one first:
+
+----
+static void walken_show_commit(struct commit *cmt, void *buf)
+{
+	commit_count++;
+}
+----
+
+The `cmt` argument is fairly self-explanatory. But it's worth mentioning that
+the `buf` argument is actually the context buffer that we can provide to the
+traversal calls - `show_data`, which we mentioned a moment ago.
+
+Since we have the `struct commit` object, we can look at all the same parts that
+we looked at in our earlier commit-only walk. For the sake of this tutorial,
+though, we'll just increment the commit counter and move on.
+
+The callback for non-commits is a little different, as we'll need to check
+which kind of object we're dealing with:
+
+----
+static void walken_show_object(struct object *obj, const char *str, void *buf)
+{
+	switch (obj->type) {
+	case OBJ_TREE:
+		tree_count++;
+		break;
+	case OBJ_BLOB:
+		blob_count++;
+		break;
+	case OBJ_TAG:
+		tag_count++;
+		break;
+	case OBJ_COMMIT:
+		BUG("unexpected commit object in walken_show_object\n");
+	default:
+		BUG("unexpected object type %s in walken_show_object\n",
+			type_name(obj->type));
+	}
+}
+----
+
+Again, `obj` is fairly self-explanatory, and we can guess that `buf` is the same
+context pointer that `walken_show_commit()` receives: the `show_data` argument
+to `traverse_commit_list()` and `traverse_commit_list_filtered()`. Finally,
+`str` contains the name of the object, which ends up being something like
+`foo.txt` (blob), `bar/baz` (tree), or `v1.2.3` (tag).
+
+To help assure us that we aren't double-counting commits, we'll include some
+complaining if a commit object is routed through our non-commit callback; we'll
+also complain if we see an invalid object type. Since those two cases should be
+unreachable, and would only change in the event of a semantic change to the Git
+codebase, we complain by using `BUG()` - which is a signal to a developer that
+the change they made caused unintended consequences, and the rest of the
+codebase needs to be updated to understand that change. `BUG()` is not intended
+to be seen by the public, so it is not localized.
+
+Our main object walk implementation is substantially different from our commit
+walk implementation, so let's make a new function to perform the object walk. We
+can perform setup which is applicable to all objects here, too, to keep separate
+from setup which is applicable to commit-only walks.
+
+We'll start by enabling all types of objects in the `struct rev_info`.  We'll
+also turn on `tree_blobs_in_commit_order`, which means that we will walk a
+commit's tree and everything it points to immediately after we find each commit,
+as opposed to waiting for the end and walking through all trees after the commit
+history has been discovered. With the appropriate settings configured, we are
+ready to call `prepare_revision_walk()`.
+
+----
+static void walken_object_walk(struct rev_info *rev)
+{
+	rev->tree_objects = 1;
+	rev->blob_objects = 1;
+	rev->tag_objects = 1;
+	rev->tree_blobs_in_commit_order = 1;
+
+	if (prepare_revision_walk(rev))
+		die(_("revision walk setup failed"));
+
+	commit_count = 0;
+	tag_count = 0;
+	blob_count = 0;
+	tree_count = 0;
+----
+
+Let's start by calling just the unfiltered walk and reporting our counts.
+Complete your implementation of `walken_object_walk()`:
+
+----
+	traverse_commit_list(rev, walken_show_commit, walken_show_object, NULL);
+
+	printf("commits %d\nblobs %d\ntags %d\ntrees %d\n", commit_count,
+		blob_count, tag_count, tree_count);
+}
+----
+
+NOTE: This output is intended to be machine-parsed. Therefore, we are not
+sending it to `trace_printf()`, and we are not localizing it - we need scripts
+to be able to count on the formatting to be exactly the way it is shown here.
+If we were intending this output to be read by humans, we would need to localize
+it with `_()`.
+
+Finally, we'll ask `cmd_walken()` to use the object walk instead. Discussing
+command line options is out of scope for this tutorial, so we'll just hardcode
+a branch we can change at compile time. Where you call `final_rev_info_setup()`
+and `walken_commit_walk()`, instead branch like so:
+
+----
+	if (1) {
+		add_head_to_pending(&rev);
+		walken_object_walk(&rev);
+	} else {
+		final_rev_info_setup(argc, argv, prefix, &rev);
+		walken_commit_walk(&rev);
+	}
+----
+
+NOTE: For simplicity, we've avoided all the filters and sorts we applied in
+`final_rev_info_setup()` and simply added `HEAD` to our pending queue. If you
+want, you can certainly use the filters we added before by moving
+`final_rev_info_setup()` out of the conditional and removing the call to
+`add_head_to_pending()`.
+
+Now we can try to run our command! It should take noticeably longer than the
+commit walk, but an examination of the output will give you an idea why. Your
+output should look similar to this example, but with different counts:
+
+----
+Object walk completed. Found 55733 commits, 100274 blobs, 0 tags, and 104210 trees.
+----
+
+This makes sense. We have more trees than commits because the Git project has
+lots of subdirectories which can change, plus at least one tree per commit. We
+have no tags because we started on a commit (`HEAD`) and while tags can point to
+commits, commits can't point to tags.
+
+NOTE: You will have different counts when you run this yourself! The number of
+objects grows along with the Git project.
+
+=== Adding a Filter
+
+There are a handful of filters that we can apply to the object walk laid out in
+`Documentation/rev-list-options.txt`. These filters are typically useful for
+operations such as creating packfiles or performing a partial clone. They are
+defined in `list-objects-filter-options.h`. For the purposes of this tutorial we
+will use the "tree:1" filter, which causes the walk to omit all trees and blobs
+which are not directly referenced by commits reachable from the commit in
+`pending` when the walk begins. (`pending` is the list of objects which need to
+be traversed during a walk; you can imagine a breadth-first tree traversal to
+help understand. In our case, that means we omit trees and blobs not directly
+referenced by `HEAD` or `HEAD`'s history, because we begin the walk with only
+`HEAD` in the `pending` list.)
+
+First, we'll need to `#include "list-objects-filter-options.h`" and set up the
+`struct list_objects_filter_options` at the top of the function.
+
+----
+static void walken_object_walk(struct rev_info *rev)
+{
+	struct list_objects_filter_options filter_options = {};
+
+	...
+----
+
+For now, we are not going to track the omitted objects, so we'll replace those
+parameters with `NULL`. For the sake of simplicity, we'll add a simple
+build-time branch to use our filter or not. Replace the line calling
+`traverse_commit_list()` with the following, which will remind us which kind of
+walk we've just performed:
+
+----
+	if (0) {
+		/* Unfiltered: */
+		trace_printf(_("Unfiltered object walk.\n"));
+		traverse_commit_list(rev, walken_show_commit,
+				walken_show_object, NULL);
+	} else {
+		trace_printf(
+			_("Filtered object walk with filterspec 'tree:1'.\n"));
+		parse_list_objects_filter(&filter_options, "tree:1");
+
+		traverse_commit_list_filtered(&filter_options, rev,
+			walken_show_commit, walken_show_object, NULL, NULL);
+	}
+----
+
+`struct list_objects_filter_options` is usually built directly from a command
+line argument, so the module provides an easy way to build one from a string.
+Even though we aren't taking user input right now, we can still build one with
+a hardcoded string using `parse_list_objects_filter()`.
+
+With the filter spec "tree:1", we are expecting to see _only_ the root tree for
+each commit; therefore, the tree object count should be less than or equal to
+the number of commits. (For an example of why that's true: `git commit --revert`
+points to the same tree object as its grandparent.)
+
+=== Counting Omitted Objects
+
+We also have the capability to enumerate all objects which were omitted by a
+filter, like with `git log --filter=<spec> --filter-print-omitted`. Asking
+`traverse_commit_list_filtered()` to populate the `omitted` list means that our
+object walk does not perform any better than an unfiltered object walk; all
+reachable objects are walked in order to populate the list.
+
+First, add the `struct oidset` and related items we will use to iterate it:
+
+----
+static void walken_object_walk(
+	...
+
+	struct oidset omitted;
+	struct oidset_iter oit;
+	struct object_id *oid = NULL;
+	int omitted_count = 0;
+	oidset_init(&omitted, 0);
+
+	...
+----
+
+Modify the call to `traverse_commit_list_filtered()` to include your `omitted`
+object:
+
+----
+	...
+
+		traverse_commit_list_filtered(&filter_options, rev,
+			walken_show_commit, walken_show_object, NULL, &omitted);
+
+	...
+----
+
+Then, after your traversal, the `oidset` traversal is pretty straightforward.
+Count all the objects within and modify the print statement:
+
+----
+	/* Count the omitted objects. */
+	oidset_iter_init(&omitted, &oit);
+
+	while ((oid = oidset_iter_next(&oit)))
+		omitted_count++;
+
+	printf("commits %d\nblobs %d\ntags %d\ntrees%d\nomitted %d\n",
+		commit_count, blob_count, tag_count, tree_count, omitted_count);
+----
+
+By running your walk with and without the filter, you should find that the total
+object count in each case is identical. You can also time each invocation of
+the `walken` subcommand, with and without `omitted` being passed in, to confirm
+to yourself the runtime impact of tracking all omitted objects.
+
+=== Changing the Order
+
+Finally, let's demonstrate that you can also reorder walks of all objects, not
+just walks of commits. First, we'll make our handlers chattier - modify
+`walken_show_commit()` and `walken_show_object()` to print the object as they
+go:
+
+----
+static void walken_show_commit(struct commit *cmt, void *buf)
+{
+	trace_printf("commit: %s\n", oid_to_hex(&cmt->object.oid));
+	commit_count++;
+}
+
+static void walken_show_object(struct object *obj, const char *str, void *buf)
+{
+	trace_printf("%s: %s\n", type_name(obj->type), oid_to_hex(&obj->oid));
+
+	...
+}
+----
+
+NOTE: Since we will be examining this output directly as humans, we'll use
+`trace_printf()` here. Additionally, since this change introduces a significant
+number of printed lines, using `trace_printf()` will allow us to easily silence
+those lines without having to recompile.
+
+(Leave the counter increment logic in place.)
+
+With only that change, run again (but save yourself some scrollback):
+
+----
+$ GIT_TRACE=1 ./bin-wrappers/git walken | head -n 10
+----
+
+Take a look at the top commit with `git show` and the object ID you printed; it
+should be the same as the output of `git show HEAD`.
+
+Next, let's change a setting on our `struct rev_info` within
+`walken_object_walk()`. Find where you're changing the other settings on `rev`,
+such as `rev->tree_objects` and `rev->tree_blobs_in_commit_order`, and add the
+`reverse` setting at the bottom:
+
+----
+	...
+
+	rev->tree_objects = 1;
+	rev->blob_objects = 1;
+	rev->tag_objects = 1;
+	rev->tree_blobs_in_commit_order = 1;
+	rev->reverse = 1;
+
+	...
+----
+
+Now, run again, but this time, let's grab the last handful of objects instead
+of the first handful:
+
+----
+$ make
+$ GIT_TRACE=1 ./bin-wrappers git walken | tail -n 10
+----
+
+The last commit object given should have the same OID as the one we saw at the
+top before, and running `git show <oid>` with that OID should give you again
+the same results as `git show HEAD`. Furthermore, if you run and examine the
+first ten lines again (with `head` instead of `tail` like we did before applying
+the `reverse` setting), you should see that now the first commit printed is the
+initial commit, `e83c5163`.
+
+== Wrapping Up
+
+Let's review. In this tutorial, we:
+
+- Built a commit walk from the ground up
+- Enabled a grep filter for that commit walk
+- Changed the sort order of that filtered commit walk
+- Built an object walk (tags, commits, trees, and blobs) from the ground up
+- Learned how to add a filter-spec to an object walk
+- Changed the display order of the filtered object walk
-- 
2.23.0.700.g56cf767bdb-goog