From: "Michael Montalbo via GitGitGadget" <gitgitgadget@gmail•com>
To: git@vger•kernel.org
Cc: "D. Ben Knoble" <ben.knoble@gmail•com>,
Michael Montalbo <mmontalbo@gmail•com>
Subject: [PATCH v3 0/3] line-log: integrate -L with the standard log output pipeline
Date: Thu, 28 May 2026 20:47:43 +0000 [thread overview]
Message-ID: <pull.2094.v3.git.1780001267.gitgitgadget@gmail.com> (raw)
In-Reply-To: <pull.2094.v2.git.1779738059.gitgitgadget@gmail.com>
Since its introduction, git log -L has short-circuited from
log_tree_commit() into its own output function, bypassing log_tree_diff()
and log_tree_diff_flush(). This skips no_free save/restore,
always_show_header, diff_free() cleanup, and means that pickaxe (-S, -G,
--find-object) and --diff-filter cannot suppress commits whose pairs are all
filtered out, because show_log() runs before diffcore_std().
This series restructures the flow so that -L goes through the same
log_tree_diff() -> log_tree_diff_flush() path as normal single-parent and
merge diffs, then uses that to enable several non-patch diff formats.
Patch 1: revision: move -L setup before output_format-to-diff derivation
Preparatory reorder in setup_revisions(). The -L block sets a default
DIFF_FORMAT_PATCH when no format is requested; move it before the derivation
of revs->diff from output_format so the default is visible to that check. No
behavior change on its own.
Patch 2: line-log: integrate -L output with the standard log-tree pipeline
Rename line_log_print() to line_log_queue_pairs(), stripping it down to only
queue pre-computed filepairs. log_tree_diff_flush() handles show_log(),
diffcore_std(), and diff_flush(). This fixes pickaxe and --diff-filter
suppression, and aligns the commit/diff separator with the rest of log
output. Rejects --full-diff, which is not yet supported when filepairs are
pre-computed.
Patch 3: line-log: allow non-patch diff formats with -L
Expand the allowlist to accept --raw, --name-only, --name-status, and
--summary. These only read filepair metadata already set by the line-log
machinery. Diff stat formats (--stat, --numstat, --shortstat, --dirstat)
remain blocked because they call compute_diffstat() on full blob content and
would show whole-file statistics rather than range-scoped ones.
Changes since v2:
* Switch "! test_grep" to "test_grep !" in tests.
Michael Montalbo (3):
revision: move -L setup before output_format-to-diff derivation
line-log: integrate -L output with the standard log-tree pipeline
line-log: allow non-patch diff formats with -L
Documentation/line-range-options.adoc | 10 +-
line-log.c | 30 ++----
line-log.h | 2 +-
log-tree.c | 10 +-
revision.c | 24 +++--
t/t4211-line-log.sh | 100 +++++++++++++++---
t/t4211/sha1/expect.parallel-change-f-to-main | 1 -
.../sha256/expect.parallel-change-f-to-main | 1 -
8 files changed, 121 insertions(+), 57 deletions(-)
base-commit: 9f223ef1c026d91c7ac68cc0211bde255dda6199
Published-As: https://github.com/gitgitgadget/git/releases/tag/pr-2094%2Fmmontalbo%2Fmm%2Fline-log-use-log-tree-diff-flush-v3
Fetch-It-Via: git fetch https://github.com/gitgitgadget/git pr-2094/mmontalbo/mm/line-log-use-log-tree-diff-flush-v3
Pull-Request: https://github.com/gitgitgadget/git/pull/2094
Range-diff vs v2:
1: 9633eb62c6 = 1: 9633eb62c6 revision: move -L setup before output_format-to-diff derivation
2: 7acfc5376e = 2: 7acfc5376e line-log: integrate -L output with the standard log-tree pipeline
3: 10a3d8dde2 ! 3: ae0b7f3ca8 line-log: allow non-patch diff formats with -L
@@ t/t4211-line-log.sh: test_expect_success '-p shows the default patch output' '
+test_expect_success '--raw shows mode, oid, status and path' '
+ git log -L1,24:b.c --raw --format= >actual &&
+ test_grep "^:100644 100644 [0-9a-f]\{7\} [0-9a-f]\{7\} M b.c$" actual &&
-+ ! test_grep "^diff --git" actual &&
-+ ! test_grep "^@@" actual
++ test_grep ! "^diff --git" actual &&
++ test_grep ! "^@@" actual
+'
+
+test_expect_success '--name-only shows path' '
+ git log -L1,24:b.c --name-only --format= >actual &&
+ test_grep "^b.c$" actual &&
-+ ! test_grep "^diff --git" actual &&
-+ ! test_grep "^@@" actual
++ test_grep ! "^diff --git" actual &&
++ test_grep ! "^@@" actual
+'
+
+test_expect_success '--name-status shows status and path' '
+ git log -L1,24:b.c --name-status --format= >actual &&
+ test_grep "^M b.c$" actual &&
-+ ! test_grep "^diff --git" actual &&
-+ ! test_grep "^@@" actual
++ test_grep ! "^diff --git" actual &&
++ test_grep ! "^@@" actual
+'
+
+test_expect_success '--stat is not yet supported with -L' '
--
gitgitgadget
next prev parent reply other threads:[~2026-05-28 20:47 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-28 4:05 [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 1/3] revision: move -L setup before output_format-to-diff derivation Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 2/3] line-log: integrate -L output with the standard log-tree pipeline Michael Montalbo via GitGitGadget
2026-04-28 4:05 ` [PATCH 3/3] line-log: allow non-patch diff formats with -L Michael Montalbo via GitGitGadget
2026-05-12 4:01 ` [PATCH 0/3] line-log: integrate -L with the standard log output pipeline Junio C Hamano
2026-05-22 18:48 ` D. Ben Knoble
[not found] ` <CALnO6CBh7nDCwT=u1xSN2c6_x88t_gNfAaT_B4PzYKr=5i_bNA@mail.gmail.com>
2026-05-24 2:00 ` Michael Montalbo
2026-05-25 19:40 ` [PATCH v2 " Michael Montalbo via GitGitGadget
2026-05-25 19:40 ` [PATCH v2 1/3] revision: move -L setup before output_format-to-diff derivation Michael Montalbo via GitGitGadget
2026-05-25 19:40 ` [PATCH v2 2/3] line-log: integrate -L output with the standard log-tree pipeline Michael Montalbo via GitGitGadget
2026-05-25 19:40 ` [PATCH v2 3/3] line-log: allow non-patch diff formats with -L Michael Montalbo via GitGitGadget
2026-05-27 20:20 ` [PATCH v2 0/3] line-log: integrate -L with the standard log output pipeline D. Ben Knoble
2026-05-28 18:55 ` Junio C Hamano
2026-05-28 19:31 ` Michael Montalbo
2026-05-28 20:47 ` Michael Montalbo via GitGitGadget [this message]
2026-05-28 20:47 ` [PATCH v3 1/3] revision: move -L setup before output_format-to-diff derivation Michael Montalbo via GitGitGadget
2026-05-28 20:47 ` [PATCH v3 2/3] line-log: integrate -L output with the standard log-tree pipeline Michael Montalbo via GitGitGadget
2026-05-28 20:47 ` [PATCH v3 3/3] line-log: allow non-patch diff formats with -L Michael Montalbo via GitGitGadget
2026-05-29 12:04 ` [PATCH v3 0/3] line-log: integrate -L with the standard log output pipeline Ben Knoble
2026-06-01 21:53 ` Junio C Hamano
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=pull.2094.v3.git.1780001267.gitgitgadget@gmail.com \
--to=gitgitgadget@gmail$(echo .)com \
--cc=ben.knoble@gmail$(echo .)com \
--cc=git@vger$(echo .)kernel.org \
--cc=mmontalbo@gmail$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox