Subject: RE: [PATCH v5] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node

From: <[email-masked]>
Date: Tue, 4 Feb 2020 22:07:02 +0530

Hi Bjorn,
I have addressed your comments and sent out the v6 for this patch.

Thanks,
Rakesh Pillai.

> -----Original Message-----
> From: Bjorn Andersson <[email-masked]>
> Sent: Monday, February 3, 2020 11:05 PM
> To: Rakesh Pillai <[email-masked]>
> Cc: [email-masked]; [email-masked];
linux-
> [email-masked]; [email-masked]
> Subject: Re: [PATCH v5] arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> module device node
> 
> On Tue 28 Jan 23:00 PST 2020, Rakesh Pillai wrote:
> 
> > Add device node for the ath10k SNOC platform driver probe
> > and add resources required for WCN3990 on sc7180 soc.
> >
> > Signed-off-by: Rakesh Pillai <[email-masked]>
> > ---
> >  arch/arm64/boot/dts/qcom/sc7180-idp.dts |  5 +++++
> >  arch/arm64/boot/dts/qcom/sc7180.dtsi    | 28
> ++++++++++++++++++++++++++++
> >  2 files changed, 33 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > index 388f50a..167f68ac 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > @@ -287,6 +287,11 @@
> >  	vdda-pll-supply = <&vreg_l4a_0p8>;
> >  };
> >
> > +&wifi {
> > +	status = "okay";
> > +	qcom,msa-fixed-perm;
> > +};
> > +
> >  /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> >
> >  &qspi_clk {
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 8011c5f..0a00c94 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -75,6 +75,12 @@
> >  			reg = <0x0 0x80900000 0x0 0x200000>;
> >  			no-map;
> >  		};
> > +
> > +		wlan_fw_mem: memory@93900000 {
> > +			compatible = "removed-dma-pool";
> 
> Sorry for not spotting this earlier, the "removed-dma-pool" compatible
> is a downstream thing and isn't defined upstream.
> 
> > +                     no-map;
> > +                     reg = <0 0x93900000 0 0x200000>;
> 
> If you swap the order of no-map and reg in this node it will look like
> all the others.
> 
> 
> Apart from that the patch looks good.
> 
> Regards,
> Bjorn
> 
> > +		};
> >  	};
> >
> >  	cpus {
> > @@ -1490,6 +1496,28 @@
> >
> >  			#freq-domain-cells = <1>;
> >  		};
> > +
> > +		wifi: wifi@18800000 {
> > +			compatible = "qcom,wcn3990-wifi";
> > +			reg = <0 0x18800000 0 0x800000>;
> > +			reg-names = "membase";
> > +			iommus = <&apps_smmu 0xc0 0x1>;
> > +			interrupts =
> > +				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0
> */ >,
> > +				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1
> */ >,
> > +				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2
> */ >,
> > +				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3
> */ >,
> > +				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4
> */ >,
> > +				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5
> */ >,
> > +				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6
> */ >,
> > +				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7
> */ >,
> > +				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8
> */ >,
> > +				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9
> */ >,
> > +				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10
> */>,
> > +				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11
> */>;
> > +			memory-region = <&wlan_fw_mem>;
> > +			status = "disabled";
> > +		};
> >  	};
> >
> >  	thermal-zones {
> > --
> > 2.7.4
> >

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel