Subject: Re: [PATCH 1/2] coresight: tmc: Add enable flag to indicate the status of ETR/ETF

From: Sai Prakash Ranjan <[email-masked]>
Date: Mon, 01 Jun 2020 22:43:00 +0530

Hi Mike,

Thanks for the review.

On 2020-06-01 18:57, Mike Leach wrote:
> Hi,
> 
> On Mon, 1 Jun 2020 at 09:02, Sai Prakash Ranjan
> <[email-masked]> wrote:
>> 
>> Add a flag to check whether TMC ETR/ETF is enabled or not.
>> This is later used in shutdown callback to determine if
>> we require to disable ETR/ETF.
>> 
>> Signed-off-by: Sai Prakash Ranjan <[email-masked]>
>> ---
>>  drivers/hwtracing/coresight/coresight-tmc.c | 2 ++
>>  drivers/hwtracing/coresight/coresight-tmc.h | 2 ++
>>  2 files changed, 4 insertions(+)
>> 
>> diff --git a/drivers/hwtracing/coresight/coresight-tmc.c 
>> b/drivers/hwtracing/coresight/coresight-tmc.c
>> index 39fba1d16e6e..5a271ebc4585 100644
>> --- a/drivers/hwtracing/coresight/coresight-tmc.c
>> +++ b/drivers/hwtracing/coresight/coresight-tmc.c
>> @@ -62,11 +62,13 @@ void tmc_flush_and_stop(struct tmc_drvdata 
>> *drvdata)
>> 
>>  void tmc_enable_hw(struct tmc_drvdata *drvdata)
>>  {
>> +       drvdata->enable = true;
>>         writel_relaxed(TMC_CTL_CAPT_EN, drvdata->base + TMC_CTL);
>>  }
>> 
>>  void tmc_disable_hw(struct tmc_drvdata *drvdata)
>>  {
>> +       drvdata->enable = false;
>>         writel_relaxed(0x0, drvdata->base + TMC_CTL);
>>  }
>> 
>> diff --git a/drivers/hwtracing/coresight/coresight-tmc.h 
>> b/drivers/hwtracing/coresight/coresight-tmc.h
>> index 71de978575f3..d156860495c7 100644
>> --- a/drivers/hwtracing/coresight/coresight-tmc.h
>> +++ b/drivers/hwtracing/coresight/coresight-tmc.h
>> @@ -184,6 +184,7 @@ struct etr_buf {
>>   * @idr_mutex: Access serialisation for idr.
>>   * @sysfs_buf: SYSFS buffer for ETR.
>>   * @perf_buf:  PERF buffer for ETR.
>> + * @enable:    Indicates whether ETR/ETF is enabled.
>>   */
>>  struct tmc_drvdata {
>>         void __iomem            *base;
>> @@ -207,6 +208,7 @@ struct tmc_drvdata {
>>         struct mutex            idr_mutex;
>>         struct etr_buf          *sysfs_buf;
>>         struct etr_buf          *perf_buf;
>> +       bool                    enable;
> 
> Is this flag needed?
> For TMC, drvdata->mode indicates if the device is in use.
> 

Yes we can use mode flag, will make this change in the next version.

Thanks,
Sai
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a 
member
of Code Aurora Forum, hosted by The Linux Foundation

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel