From: sboyd@codeaurora•org (Stephen Boyd)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice
Date: Mon, 19 Sep 2011 11:01:39 -0700 [thread overview]
Message-ID: <1316455300-5752-1-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <20110916114140.GA31334@e102144-lin.cambridge.arm.com>
ARM patch 7072/1 (debug: use kconfig choice for selecting
DEBUG_LL UART) only allowed CLSP711X_UART2 to be selected because
there is no NONE option in a choice menu. Add a UART1 choice so
that users can still choose UART1 explicitly.
Signed-off-by: Stephen Boyd <sboyd@codeaurora•org>
---
On 09/16/11 04:41, Will Deacon wrote:
> Ah yes. This will need to be added as part of the platform updates to go via
> Arnd. It should be easy enough just to have a DEBUG_CLPS711X_UART1 option,
> for example, and the platform code will fall back to the first UART.
I couldn't find these patches applied in Arnd's tree so I based it off of
Russell's for-next branch.
arch/arm/Kconfig.debug | 9 +++++++--
1 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 60d1846..a37e646 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -90,14 +90,19 @@ choice
Saying N will cause the debug messages to appear on the first
16550 serial port.
+ config DEBUG_CLPS711X_UART1
+ bool "Kernel low-level debugging messages via UART1"
+ depends on ARCH_CLPS711X
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the first serial port on these devices.
+
config DEBUG_CLPS711X_UART2
bool "Kernel low-level debugging messages via UART2"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
- Saying N will cause the debug messages to appear on the first
- serial port.
endchoice
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-09-19 18:01 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-16 21:41 [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART Will Deacon
2011-08-16 21:41 ` [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection Will Deacon
2011-10-10 11:56 ` Thomas Abraham
2011-10-10 12:23 ` Will Deacon
2011-10-10 12:35 ` Thomas Abraham
2011-10-10 13:34 ` Will Deacon
2011-10-10 13:38 ` Thomas Abraham
2011-08-16 21:41 ` [PATCH 3/3] ARM: realview: " Will Deacon
2011-08-18 4:06 ` [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART Nicolas Pitre
2011-08-18 9:33 ` Will Deacon
2011-08-18 16:11 ` Shawn Guo
2011-08-18 16:07 ` Will Deacon
2011-08-19 4:59 ` Shawn Guo
2011-08-19 11:08 ` Will Deacon
2011-08-19 11:37 ` Shawn Guo
2011-08-19 12:32 ` Will Deacon
2011-08-19 15:49 ` Nicolas Pitre
2011-08-21 9:14 ` Russell King - ARM Linux
2011-08-21 17:35 ` Nicolas Pitre
2011-08-21 18:26 ` Russell King - ARM Linux
2011-08-21 19:02 ` Nicolas Pitre
2011-08-21 19:18 ` Russell King - ARM Linux
2011-08-21 19:22 ` Russell King - ARM Linux
2011-08-21 20:07 ` Nicolas Pitre
2011-08-21 20:54 ` Russell King - ARM Linux
2011-08-21 21:00 ` Nicolas Pitre
2011-08-21 21:29 ` Russell King - ARM Linux
2011-08-21 22:00 ` Nicolas Pitre
2011-08-21 19:53 ` Nicolas Pitre
2011-09-06 9:28 ` Tony Lindgren
2011-09-06 9:37 ` Russell King - ARM Linux
2011-09-06 10:27 ` Tony Lindgren
2011-09-06 10:52 ` Russell King - ARM Linux
2011-09-06 11:01 ` Tony Lindgren
2011-09-06 11:07 ` Russell King - ARM Linux
2011-09-06 19:45 ` Uwe Kleine-König
2011-08-19 14:54 ` Nicolas Pitre
2011-08-19 4:56 ` [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection Shawn Guo
2011-08-19 6:35 ` Sascha Hauer
2011-08-19 7:00 ` Shawn Guo
2011-08-19 11:09 ` Will Deacon
2011-08-19 11:39 ` Sascha Hauer
2011-08-19 12:35 ` Will Deacon
2011-08-19 17:15 ` Sascha Hauer
2011-08-21 9:18 ` Russell King - ARM Linux
2011-08-21 11:25 ` Will Deacon
2011-08-21 17:59 ` Nicolas Pitre
2011-08-21 18:17 ` Russell King - ARM Linux
2011-08-21 18:28 ` Nicolas Pitre
2011-08-21 18:33 ` Russell King - ARM Linux
2011-11-22 8:58 ` Uwe Kleine-König
2011-11-22 11:50 ` Will Deacon
2011-11-22 13:02 ` Uwe Kleine-König
2011-11-22 13:20 ` Will Deacon
2011-11-22 13:30 ` Uwe Kleine-König
2011-11-22 15:48 ` Russell King - ARM Linux
2011-11-22 16:38 ` Uwe Kleine-König
2011-11-22 16:47 ` Mark Brown
2011-11-22 17:13 ` Uwe Kleine-König
2011-11-22 20:24 ` Russell King - ARM Linux
2011-11-22 21:19 ` Arnd Bergmann
2011-11-22 23:00 ` Mark Brown
2011-11-23 10:57 ` Will Deacon
2011-09-15 17:34 ` [PATCH 1/3] ARM: debug: use kconfig choice for selecting DEBUG_LL UART Stephen Boyd
2011-09-16 11:41 ` Will Deacon
2011-09-19 18:01 ` Stephen Boyd [this message]
2011-09-19 18:01 ` [PATCH 2/2] ARM: debug: Move DEBUG_ICEDCC into the DEBUG_LL choice Stephen Boyd
2011-09-19 21:25 ` [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice Will Deacon
2011-09-19 22:12 ` Stephen Boyd
2011-09-19 22:41 ` Russell King - ARM Linux
2011-09-19 22:55 ` Stephen Boyd
2011-11-22 20:42 ` Russell King - ARM Linux
2011-09-19 23:14 ` Will Deacon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1316455300-5752-1-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox