Subject: [RFC][PATCH] ARM: kirkwood: Remove eSATA SheevaPlug board support

From: [email-masked] (Tixy)
Date: Tue, 06 Dec 2011 07:07:08 +0000

On Sat, 2011-12-03 at 13:00 -0500, Nicolas Pitre wrote:
> On Sat, 3 Dec 2011, Tixy wrote:
> > [PATCH] Fix machine_is_xxx() naming for eSata SheevaPlug and QNAP TS-209
> > 
> > The eSata SheevaPlug and QNAP TS-209 devices were removed from
> > mach-types due to naming mismatches between machine_is_xxx(), CONFIG_XXX
> > and MACH_TYPE_XXX.
> > 
> > This patch fixes those mismatches and adds the devices back into
> > mach-types.
> > 
> > Cc: Nicolas Pitre <[email-masked]>
> > Cc: Lennert Buytenhek <[email-masked]>
> > Cc: Russell King <[email-masked]>
> > Signed-off-by: Jon Medhurst <[email-masked]>
> 
> Acked-by: Nicolas Pitre <[email-masked]>
> 
> Obviously, the change to mach-types should be done in the machine 
> registry database as well by RMK.

Which tree should this go through? Russell's or arm-soc?

-- 
Tixy

> > ---
> >  arch/arm/mach-kirkwood/sheevaplug-setup.c |    6 +++---
> >  arch/arm/mach-orion5x/ts209-setup.c       |    2 +-
> >  arch/arm/tools/mach-types                 |    2 ++
> >  3 files changed, 6 insertions(+), 4 deletions(-)
> > 
> > diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
> > index 85bff6b..4ea70e5 100644
> > --- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
> > +++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
> > @@ -107,7 +107,7 @@ static void __init sheevaplug_init(void)
> >  	kirkwood_init();
> >  
> >  	/* setup gpio pin select */
> > -	if (machine_is_sheeva_esata())
> > +	if (machine_is_esata_sheevaplug())
> >  		kirkwood_mpp_conf(sheeva_esata_mpp_config);
> >  	else
> >  		kirkwood_mpp_conf(sheevaplug_mpp_config);
> > @@ -123,11 +123,11 @@ static void __init sheevaplug_init(void)
> >  	kirkwood_ge00_init(&sheevaplug_ge00_data);
> >  
> >  	/* honor lower power consumption for plugs with out eSATA */
> > -	if (machine_is_sheeva_esata())
> > +	if (machine_is_esata_sheevaplug())
> >  		kirkwood_sata_init(&sheeva_esata_sata_data);
> >  
> >  	/* enable sd wp and sd cd on plugs with esata */
> > -	if (machine_is_sheeva_esata())
> > +	if (machine_is_esata_sheevaplug())
> >  		kirkwood_sdio_init(&sheeva_esata_mvsdio_data);
> >  	else
> >  		kirkwood_sdio_init(&sheevaplug_mvsdio_data);
> > diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
> > index 62c156b..5d64087 100644
> > --- a/arch/arm/mach-orion5x/ts209-setup.c
> > +++ b/arch/arm/mach-orion5x/ts209-setup.c
> > @@ -178,7 +178,7 @@ static struct hw_pci qnap_ts209_pci __initdata = {
> >  
> >  static int __init qnap_ts209_pci_init(void)
> >  {
> > -	if (machine_is_ts_x09())
> > +	if (machine_is_ts209())
> >  		pci_common_init(&qnap_ts209_pci);
> >  
> >  	return 0;
> > diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
> > index 459d114..7f9809a 100644
> > --- a/arch/arm/tools/mach-types
> > +++ b/arch/arm/tools/mach-types
> > @@ -269,6 +269,7 @@ dns323			MACH_DNS323		DNS323			1542
> >  omap3_beagle		MACH_OMAP3_BEAGLE	OMAP3_BEAGLE		1546
> >  nokia_n810		MACH_NOKIA_N810		NOKIA_N810		1548
> >  pcm038			MACH_PCM038		PCM038			1551
> > +ts209			MACH_TS209		TS209			1565
> >  at91cap9adk		MACH_AT91CAP9ADK	AT91CAP9ADK		1566
> >  mx31moboard		MACH_MX31MOBOARD	MX31MOBOARD		1574
> >  vision_ep9307		MACH_VISION_EP9307	VISION_EP9307		1578
> > @@ -457,6 +458,7 @@ guruplug		MACH_GURUPLUG		GURUPLUG		2659
> >  spear310		MACH_SPEAR310		SPEAR310		2660
> >  spear320		MACH_SPEAR320		SPEAR320		2661
> >  aquila			MACH_AQUILA		AQUILA			2676
> > +esata_sheevaplug	MACH_ESATA_SHEEVAPLUG	ESATA_SHEEVAPLUG	2678
> >  msm7x30_surf		MACH_MSM7X30_SURF	MSM7X30_SURF		2679
> >  ea2478devkit		MACH_EA2478DEVKIT	EA2478DEVKIT		2683
> >  terastation_wxl		MACH_TERASTATION_WXL	TERASTATION_WXL		2697
> > -- 
> > 1.7.2.5
> > 
> > 
> >