Subject: [PATCH 1/2] dmaengine: add msm bam dma driver

From: [email-masked] (Andy Gross)
Date: Fri, 25 Oct 2013 15:24:02 -0500

Add the DMA engine driver for the MSM Bus Access Manager (BAM) DMA controller
found in the MSM 8x74 platforms.

Each BAM DMA device is associated with a specific on-chip peripheral.  Each
channel provides a uni-directional data transfer engine that is capable of
transferring data between the peripheral and system memory (System mode) or
between two peripherals (BAM2BAM).

The initial release of this driver only supports slave transfers between
peripherals and system memory.

Signed-off-by: Andy Gross <[email-masked]>
---
 drivers/dma/Kconfig            |    9 +
 drivers/dma/Makefile           |    1 +
 drivers/dma/msm_bam_dma.c      |  840 ++++++++++++++++++++++++++++++++++++++++
 drivers/dma/msm_bam_dma_priv.h |  286 ++++++++++++++
 include/linux/msm_bam_dma.h    |   27 ++
 5 files changed, 1163 insertions(+)
 create mode 100644 drivers/dma/msm_bam_dma.c
 create mode 100644 drivers/dma/msm_bam_dma_priv.h
 create mode 100644 include/linux/msm_bam_dma.h

diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index f238cfd..a71b415 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -364,4 +364,13 @@ config DMATEST
 	  Simple DMA test client. Say N unless you're debugging a
 	  DMA Device driver.
 
+
+config MSM_BAM_DMA
+	tristate "MSM BAM DMA support"
+	depends on ARCH_MSM
+	select DMA_ENGINE
+	---help---
+	  Enable support for the MSM BAM DMA controller.  This controller
+	  provides DMA capabilities for a variety of on-chip devices.
+
 endif
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index db89035..69be540 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -41,3 +41,4 @@ obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
 obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
 obj-$(CONFIG_TI_CPPI41) += cppi41.o
 obj-$(CONFIG_K3_DMA) += k3dma.o
+obj-$(CONFIG_MSM_BAM_DMA) += msm_bam_dma.o
diff --git a/drivers/dma/msm_bam_dma.c b/drivers/dma/msm_bam_dma.c
new file mode 100644
index 0000000..d16bf94
--- /dev/null
+++ b/drivers/dma/msm_bam_dma.c
@@ -0,0 +1,840 @@
+/*
+ * MSM BAM DMA engine driver
+ *
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_dma.h>
+#include <linux/clk.h>
+#include <linux/msm_bam_dma.h>
+
+#include "dmaengine.h"
+#include "msm_bam_dma_priv.h"
+
+
+/*
+ * bam_alloc_chan - Allocate channel resources for DMA channel.
+ * @chan: specified channel
+ *
+ * This function allocates the FIFO descriptor memory and resets the channel
+ */
+static int bam_alloc_chan(struct dma_chan *chan)
+{
+	struct bam_chan *bchan = to_bam_chan(chan);
+	struct bam_device *bdev = bchan->device;
+	u32 val;
+	union bam_pipe_ctrl pctrl;
+
+	/* check for channel activity */
+	pctrl.value = ioread32(bdev->regs + BAM_P_CTRL(bchan->id));
+	if (pctrl.bits.p_en) {
+		dev_err(bdev->dev, "channel already active\n");
+		return -EINVAL;
+	}
+
+	/* allocate FIFO descriptor space */
+	bchan->fifo_virt = (struct bam_desc_hw *)dma_alloc_coherent(bdev->dev,
+				BAM_DESC_FIFO_SIZE, &bchan->fifo_phys,
+				GFP_KERNEL);
+
+	if (!bchan->fifo_virt) {
+		dev_err(bdev->dev, "Failed to allocate descriptor fifo\n");
+		return -ENOMEM;
+	}
+
+	/* reset channel */
+	iowrite32(1, bdev->regs + BAM_P_RST(bchan->id));
+	iowrite32(0, bdev->regs + BAM_P_RST(bchan->id));
+
+	/* configure fifo address/size in bam channel registers */
+	iowrite32(bchan->fifo_phys, bdev->regs +
+			BAM_P_DESC_FIFO_ADDR(bchan->id));
+	iowrite32(BAM_DESC_FIFO_SIZE, bdev->regs +
+			BAM_P_FIFO_SIZES(bchan->id));
+
+	/* unmask and enable interrupts for defined EE, bam and error irqs */
+	iowrite32(BAM_IRQ_MSK, bdev->regs + BAM_IRQ_SRCS_EE(bchan->ee));
+
+	/* enable the per pipe interrupts, enable EOT and INT irqs */
+	iowrite32(P_DEFAULT_IRQS_EN, bdev->regs + BAM_P_IRQ_EN(bchan->id));
+
+	/* unmask the specific pipe and EE combo */
+	val = ioread32(bdev->regs + BAM_IRQ_SRCS_MSK_EE(bchan->ee));
+	val |= 1 << bchan->id;
+	iowrite32(val, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bchan->ee));
+
+	/* set fixed direction and mode, then enable channel */
+	pctrl.value = 0;
+	pctrl.bits.p_direction =
+		(bchan->bam_slave.slave.direction == DMA_DEV_TO_MEM) ?
+			BAM_PIPE_PRODUCER : BAM_PIPE_CONSUMER;
+	pctrl.bits.p_sys_mode = BAM_PIPE_MODE_SYSTEM;
+	pctrl.bits.p_en = 1;
+
+	iowrite32(pctrl.value, bdev->regs + BAM_P_CTRL(bchan->id));
+
+	/* set desc threshold */
+	/* do bookkeeping for tracking used EEs, used during IRQ handling */
+	set_bit(bchan->ee, &bdev->enabled_ees);
+
+	bchan->head = 0;
+	bchan->tail = 0;
+
+	return 0;
+}
+
+/*
+ * bam_free_chan - Frees dma resources associated with specific channel
+ * @chan: specified channel
+ *
+ * Free the allocated fifo descriptor memory and channel resources
+ *
+ */
+static void bam_free_chan(struct dma_chan *chan)
+{
+	struct bam_chan *bchan = to_bam_chan(chan);
+	struct bam_device *bdev = bchan->device;
+	u32 val;
+
+	/* reset channel */
+	iowrite32(1, bdev->regs + BAM_P_RST(bchan->id));
+	iowrite32(0, bdev->regs + BAM_P_RST(bchan->id));
+
+	dma_free_coherent(bdev->dev, BAM_DESC_FIFO_SIZE, bchan->fifo_virt,
+				bchan->fifo_phys);
+
+	/* mask irq for pipe/channel */
+	val = ioread32(bdev->regs + BAM_IRQ_SRCS_MSK_EE(bchan->ee));
+	val &= ~(1 << bchan->id);
+	iowrite32(val, bdev->regs + BAM_IRQ_SRCS_MSK_EE(bchan->ee));
+
+	/* disable irq */
+	iowrite32(0, bdev->regs + BAM_P_IRQ_EN(bchan->id));
+
+	clear_bit(bchan->ee, &bdev->enabled_ees);
+}
+
+/*
+ * bam_slave_config - set slave configuration for channel
+ * @chan: dma channel
+ * @cfg: slave configuration
+ *
+ * Sets slave configuration for channel
+ * Only allow setting direction once.  BAM channels are unidirectional
+ * and the direction is set in hardware.
+ *
+ */
+static void bam_slave_config(struct bam_chan *bchan,
+		struct bam_dma_slave_config *bcfg)
+{
+	struct bam_device *bdev = bchan->device;
+
+	bchan->bam_slave.desc_threshold = bcfg->desc_threshold;
+
+	/* set desc threshold */
+	iowrite32(bcfg->desc_threshold, bdev->regs + BAM_DESC_CNT_TRSHLD);
+}
+
+/*
+ * bam_start_dma - loads up descriptors and starts dma
+ * @chan: dma channel
+ *
+ * Loads descriptors into descriptor fifo and starts dma controller
+ *
+ * NOTE: Must hold channel lock
+*/
+static void bam_start_dma(struct bam_chan *bchan)
+{
+	struct bam_device *bdev = bchan->device;
+	struct bam_async_desc *async_desc, *_adesc;
+	u32 curr_len, val;
+	u32 num_processed = 0;
+
+	if (list_empty(&bchan->pending))
+		return;
+
+	curr_len = (bchan->head <= bchan->tail) ?
+			bchan->tail - bchan->head :
+			MAX_DESCRIPTORS - bchan->head + bchan->tail;
+
+	list_for_each_entry_safe(async_desc, _adesc, &bchan->pending, node) {
+
+		/* bust out if we are out of room */
+		if (async_desc->num_desc + curr_len > MAX_DESCRIPTORS)
+			break;
+
+		/* copy descriptors into fifo */
+		if (bchan->tail + async_desc->num_desc > MAX_DESCRIPTORS) {
+			u32 partial = MAX_DESCRIPTORS - bchan->tail;
+
+			memcpy(&bchan->fifo_virt[bchan->tail], async_desc->desc,
+				partial * sizeof(struct bam_desc_hw));
+			memcpy(bchan->fifo_virt, &async_desc->desc[partial],
+				(async_desc->num_desc - partial) *
+					sizeof(struct bam_desc_hw));
+		} else {
+			memcpy(&bchan->fifo_virt[bchan->tail], async_desc->desc,
+				async_desc->num_desc *
+				sizeof(struct bam_desc_hw));
+		}
+
+		num_processed++;
+		bchan->tail += async_desc->num_desc;
+		bchan->tail %= MAX_DESCRIPTORS;
+		curr_len += async_desc->num_desc;
+
+		list_move_tail(&async_desc->node, &bchan->active);
+	}
+
+	/* bail if we didn't queue anything to the active queue */
+	if (!num_processed)
+		return;
+
+	async_desc = list_first_entry(&bchan->active, struct bam_async_desc,
+			node);
+
+	val = ioread32(bdev->regs + BAM_P_SW_OFSTS(bchan->id));
+	val &= P_SW_OFSTS_MASK;
+
+	/* kick off dma by forcing a write event to the pipe */
+	iowrite32((bchan->tail * sizeof(struct bam_desc_hw)),
+			bdev->regs + BAM_P_EVNT_REG(bchan->id));
+}
+
+/*
+ * bam_tx_submit - Adds transaction to channel pending queue
+ * @tx: transaction to queue
+ *
+ * Adds dma transaction to pending queue for channel
+ *
+*/
+static dma_cookie_t bam_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct bam_chan *bchan = to_bam_chan(tx->chan);
+	struct bam_async_desc *desc = to_bam_async_desc(tx);
+	dma_cookie_t cookie;
+
+	spin_lock_bh(&bchan->lock);
+
+	cookie = dma_cookie_assign(tx);
+	list_add_tail(&desc->node, &bchan->pending);
+
+	spin_unlock_bh(&bchan->lock);
+
+	return cookie;
+}
+
+/*
+ * bam_prep_slave_sg - Prep slave sg transaction
+ *
+ * @chan: dma channel
+ * @sgl: scatter gather list
+ * @sg_len: length of sg
+ * @direction: DMA transfer direction
+ * @flags: DMA flags
+ * @context: transfer context (unused)
+ */
+static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
+	struct scatterlist *sgl, unsigned int sg_len,
+	enum dma_transfer_direction direction, unsigned long flags,
+	void *context)
+{
+	struct bam_chan *bchan = to_bam_chan(chan);
+	struct bam_device *bdev = bchan->device;
+	struct bam_async_desc *async_desc = NULL;
+	struct scatterlist *sg;
+	u32 i;
+	struct bam_desc_hw *desc;
+
+
+	if (!is_slave_direction(direction)) {
+		dev_err(bdev->dev, "invalid dma direction\n");
+		goto err_out;
+	}
+
+	/* direction has to match pipe configuration from the slave config */
+	if (direction != bchan->bam_slave.slave.direction) {
+		dev_err(bdev->dev,
+				"trans does not match channel configuration\n");
+		goto err_out;
+	}
+
+	/* make sure number of descriptors will fit within the fifo */
+	if (sg_len > MAX_DESCRIPTORS) {
+		dev_err(bdev->dev, "not enough fifo descriptor space\n");
+		goto err_out;
+	}
+
+	/* allocate enough room to accomodate the number of entries */
+	async_desc = kzalloc(sizeof(*async_desc) +
+			(sg_len * sizeof(struct bam_desc_hw)), GFP_KERNEL);
+
+	if (!async_desc) {
+		dev_err(bdev->dev, "failed to allocate async descriptor\n");
+		goto err_out;
+	}
+
+	async_desc->num_desc = sg_len;
+	async_desc->dir = (direction == DMA_DEV_TO_MEM) ? BAM_PIPE_PRODUCER :
+				BAM_PIPE_CONSUMER;
+
+	/* fill in descriptors, align hw descriptor to 8 bytes */
+	desc = async_desc->desc;
+	for_each_sg(sgl, sg, sg_len, i) {
+		if (sg_dma_len(sg) > BAM_MAX_DATA_SIZE) {
+			dev_err(bdev->dev, "segment exceeds max size\n");
+			goto err_out;
+		}
+
+		desc->addr = sg_dma_address(sg);
+		desc->size = sg_dma_len(sg);
+		desc++;
+	}
+
+	/* set EOT flag on last descriptor, we want IRQ on completion */
+	async_desc->desc[async_desc->num_desc-1].flags |= DESC_FLAG_EOT;
+
+	dma_async_tx_descriptor_init(&async_desc->txd, chan);
+	async_desc->txd.tx_submit = bam_tx_submit;
+
+	return &async_desc->txd;
+
+err_out:
+	kfree(async_desc);
+	return NULL;
+}
+
+/*
+ * bam_dma_terminate_all - terminate all transactions
+ * @chan: dma channel
+ *
+ * Idles channel and dequeues and frees all transactions
+ * No callbacks are done
+ *
+*/
+static void bam_dma_terminate_all(struct dma_chan *chan)
+{
+	struct bam_chan *bchan = to_bam_chan(chan);
+	struct bam_device *bdev = bchan->device;
+	LIST_HEAD(desc_cleanup);
+	struct bam_async_desc *desc, *_desc;
+
+	spin_lock_bh(&bchan->lock);
+
+	/* reset channel */
+	iowrite32(1, bdev->regs + BAM_P_RST(bchan->id));
+	iowrite32(0, bdev->regs + BAM_P_RST(bchan->id));
+
+	/* grab all the descriptors and free them */
+	list_splice_tail_init(&bchan->pending, &desc_cleanup);
+	list_splice_tail_init(&bchan->active, &desc_cleanup);
+
+	list_for_each_entry_safe(desc, _desc, &desc_cleanup, node)
+		kfree(desc);
+
+	spin_unlock_bh(&bchan->lock);
+}
+
+/*
+ * bam_control - DMA device control
+ * @chan: dma channel
+ * @cmd: control cmd
+ * @arg: cmd argument
+ *
+ * Perform DMA control command
+ *
+*/
+static int bam_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+	unsigned long arg)
+{
+	struct bam_chan *bchan = to_bam_chan(chan);
+	struct bam_device *bdev = bchan->device;
+	struct bam_dma_slave_config *bconfig;
+	int ret = 0;
+
+	switch (cmd) {
+	case DMA_PAUSE:
+		spin_lock_bh(&bchan->lock);
+		iowrite32(1, bdev->regs + BAM_P_HALT(bchan->id));
+		spin_unlock_bh(&bchan->lock);
+		break;
+	case DMA_RESUME:
+		spin_lock_bh(&bchan->lock);
+		iowrite32(0, bdev->regs + BAM_P_HALT(bchan->id));
+		spin_unlock_bh(&bchan->lock);
+		break;
+	case DMA_TERMINATE_ALL:
+		bam_dma_terminate_all(chan);
+		break;
+	case DMA_SLAVE_CONFIG:
+		bconfig = (struct bam_dma_slave_config *)arg;
+		bam_slave_config(bchan, bconfig);
+		break;
+	default:
+		ret = -EIO;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * process_irqs_per_ee - processes the interrupts for a specific ee
+ * @bam: bam controller
+ * @ee: execution environment
+ *
+ * This function processes the interrupts for a given execution environment
+ *
+ */
+static u32 process_irqs_per_ee(struct bam_device *bdev,
+	u32 ee)
+{
+	u32 i, srcs, stts, pipe_stts;
+	u32 clr_mask = 0;
+
+
+	srcs = ioread32(bdev->regs + BAM_IRQ_SRCS_EE(ee));
+
+	/* check for general bam error */
+	if (srcs & BAM_IRQ) {
+		stts = ioread32(bdev->regs + BAM_IRQ_STTS);
+		clr_mask |= stts;
+	}
+
+	/* check pipes / channels */
+	if (srcs & P_IRQ) {
+
+		for (i = 0; i < bdev->num_channels; i++) {
+			if (srcs & (1 << i)) {
+				/* clear pipe irq */
+				pipe_stts = ioread32(bdev->regs +
+					BAM_P_IRQ_STTS(i));
+
+				iowrite32(pipe_stts, bdev->regs +
+					BAM_P_IRQ_CLR(i));
+
+				/* schedule channel work */
+				tasklet_schedule(&bdev->channels[i].tasklet);
+			}
+		}
+	}
+
+	return clr_mask;
+}
+
+/*
+ * bam_dma_irq - irq handler for bam controller
+ * @irq: IRQ of interrupt
+ * @data: callback data
+ *
+ * IRQ handler for the bam controller
+ */
+static irqreturn_t bam_dma_irq(int irq, void *data)
+{
+	struct bam_device *bdev = (struct bam_device *)data;
+	u32 clr_mask = 0;
+	u32 i;
+
+
+	for (i = 0; i < bdev->num_ees; i++) {
+		if (test_bit(i, &bdev->enabled_ees))
+			clr_mask |= process_irqs_per_ee(bdev, i);
+	}
+
+	iowrite32(clr_mask, bdev->regs + BAM_IRQ_CLR);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * bam_tx_status - returns status of transaction
+ * @chan: dma channel
+ * @cookie: transaction cookie
+ * @txstate: DMA transaction state
+ *
+ * Return status of dma transaction
+ */
+static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
+		struct dma_tx_state *txstate)
+{
+	return dma_cookie_status(chan, cookie, txstate);
+}
+
+/*
+ * dma_tasklet - DMA IRQ tasklet
+ * @data: tasklet argument (bam controller structure)
+ *
+ * Sets up next DMA operation and then processes all completed transactions
+ */
+static void dma_tasklet(unsigned long data)
+{
+	struct bam_chan *bchan = (struct bam_chan *)data;
+	struct bam_async_desc *desc, *_desc;
+	LIST_HEAD(desc_cleanup);
+	u32 fifo_length;
+
+
+	spin_lock_bh(&bchan->lock);
+
+	if (list_empty(&bchan->active))
+		goto out;
+
+	fifo_length = (bchan->head <= bchan->tail) ?
+		bchan->tail - bchan->head :
+		MAX_DESCRIPTORS - bchan->head + bchan->tail;
+
+	/* only process those which are currently done */
+	list_for_each_entry_safe(desc, _desc, &bchan->active, node) {
+		if (desc->num_desc > fifo_length)
+			break;
+
+		dma_cookie_complete(&desc->txd);
+
+		list_move_tail(&desc->node, &desc_cleanup);
+		fifo_length -= desc->num_desc;
+		bchan->head += desc->num_desc;
+		bchan->head %= MAX_DESCRIPTORS;
+	}
+
+out:
+	/* kick off processing of any queued descriptors */
+	bam_start_dma(bchan);
+
+	spin_unlock_bh(&bchan->lock);
+
+	/* process completed descriptors */
+	list_for_each_entry_safe(desc, _desc, &desc_cleanup, node) {
+		if (desc->txd.callback)
+			desc->txd.callback(desc->txd.callback_param);
+
+		kfree(desc);
+	}
+}
+
+/*
+ * bam_issue_pending - starts pending transactions
+ * @chan: dma channel
+ *
+ * Calls tasklet directly which in turn starts any pending transactions
+ */
+static void bam_issue_pending(struct dma_chan *chan)
+{
+	dma_tasklet((unsigned long)chan);
+}
+
+struct bam_filter_args {
+	struct dma_device *dev;
+	u32 id;
+	u32 ee;
+	u32 dir;
+};
+
+static bool bam_dma_filter(struct dma_chan *chan, void *data)
+{
+	struct bam_filter_args *args = data;
+	struct bam_chan *bchan = to_bam_chan(chan);
+
+	if (args->dev == chan->device &&
+		args->id == bchan->id) {
+
+		/* we found the channel, so lets set the EE and dir */
+		bchan->ee = args->ee;
+		bchan->bam_slave.slave.direction = args->dir ?
+				DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+		return true;
+	}
+
+	return false;
+}
+
+static struct dma_chan *bam_dma_xlate(struct of_phandle_args *dma_spec,
+		struct of_dma *of)
+{
+	struct bam_filter_args args;
+	dma_cap_mask_t cap;
+
+	if (dma_spec->args_count != 3)
+		return NULL;
+
+	args.dev = of->of_dma_data;
+	args.id = dma_spec->args[0];
+	args.ee = dma_spec->args[1];
+	args.dir = dma_spec->args[2];
+
+	dma_cap_zero(cap);
+	dma_cap_set(DMA_SLAVE, cap);
+
+	return dma_request_channel(cap, bam_dma_filter, &args);
+}
+
+/*
+ * bam_init
+ * @bdev: bam device
+ *
+ * Initialization helper for global bam registers
+ */
+static int bam_init(struct bam_device *bdev)
+{
+	union bam_num_pipes num_pipes;
+	union bam_ctrl ctrl;
+	union bam_cnfg_bits cnfg_bits;
+	union bam_revision revision;
+
+	/* read versioning information */
+	revision.value = ioread32(bdev->regs + BAM_REVISION);
+	bdev->num_ees = revision.bits.num_ees;
+
+	num_pipes.value = ioread32(bdev->regs + BAM_NUM_PIPES);
+	bdev->num_channels = num_pipes.bits.bam_num_pipes;
+
+	/* s/w reset bam */
+	/* after reset all pipes are disabled and idle */
+	ctrl.value = ioread32(bdev->regs + BAM_CTRL);
+	ctrl.bits.bam_sw_rst = 1;
+	iowrite32(ctrl.value, bdev->regs + BAM_CTRL);
+	ctrl.bits.bam_sw_rst = 0;
+	iowrite32(ctrl.value, bdev->regs + BAM_CTRL);
+
+	/* enable bam */
+	ctrl.bits.bam_en = 1;
+	iowrite32(ctrl.value, bdev->regs + BAM_CTRL);
+
+	/* set descriptor threshhold, start with 4 bytes */
+	iowrite32(DEFAULT_CNT_THRSHLD, bdev->regs + BAM_DESC_CNT_TRSHLD);
+
+	/* set config bits for h/w workarounds */
+	/* Enable all workarounds except BAM_FULL_PIPE */
+	cnfg_bits.value = 0xffffffff;
+	cnfg_bits.bits.obsolete = 0;
+	cnfg_bits.bits.obsolete2 = 0;
+	cnfg_bits.bits.reserved = 0;
+	cnfg_bits.bits.reserved2 = 0;
+	cnfg_bits.bits.bam_full_pipe = 0;
+	iowrite32(cnfg_bits.value, bdev->regs + BAM_CNFG_BITS);
+
+	/* enable irqs for errors */
+	iowrite32(BAM_ERROR_EN | BAM_HRESP_ERR_EN, bdev->regs + BAM_IRQ_EN);
+	return 0;
+}
+
+static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan,
+	u32 index)
+{
+	bchan->id = index;
+	bchan->common.device = &bdev->common;
+	bchan->device = bdev;
+	spin_lock_init(&bchan->lock);
+
+	INIT_LIST_HEAD(&bchan->pending);
+	INIT_LIST_HEAD(&bchan->active);
+
+	dma_cookie_init(&bchan->common);
+	list_add_tail(&bchan->common.device_node,
+		&bdev->common.channels);
+
+	tasklet_init(&bchan->tasklet, dma_tasklet, (unsigned long)bchan);
+
+	/* reset channel - just to be sure */
+	iowrite32(1, bdev->regs + BAM_P_RST(bchan->id));
+	iowrite32(0, bdev->regs + BAM_P_RST(bchan->id));
+}
+
+static int bam_dma_probe(struct platform_device *pdev)
+{
+	struct bam_device *bdev;
+	int err, i;
+
+	bdev = kzalloc(sizeof(*bdev), GFP_KERNEL);
+	if (!bdev) {
+		dev_err(&pdev->dev, "insufficient memory for private data\n");
+		err = -ENOMEM;
+		goto err_no_bdev;
+	}
+
+	bdev->dev = &pdev->dev;
+	dev_set_drvdata(bdev->dev, bdev);
+
+	bdev->regs = of_iomap(pdev->dev.of_node, 0);
+	if (!bdev->regs) {
+		dev_err(bdev->dev, "unable to ioremap base\n");
+		err = -ENOMEM;
+		goto err_free_bamdev;
+	}
+
+	bdev->irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	if (bdev->irq == NO_IRQ) {
+		dev_err(bdev->dev, "unable to map irq\n");
+		err = -EINVAL;
+		goto err_unmap_mem;
+	}
+
+	bdev->bamclk = devm_clk_get(bdev->dev, "bam_clk");
+	if (IS_ERR(bdev->bamclk)) {
+		err = PTR_ERR(bdev->bamclk);
+		goto err_free_irq;
+	}
+
+	err = clk_prepare_enable(bdev->bamclk);
+	if (err) {
+		dev_err(bdev->dev, "failed to prepare/enable clock");
+		goto err_free_irq;
+	}
+
+	err = request_irq(bdev->irq, &bam_dma_irq, IRQF_TRIGGER_HIGH, "bam_dma",
+				bdev);
+	if (err) {
+		dev_err(bdev->dev, "error requesting irq\n");
+		err = -EINVAL;
+		goto err_disable_clk;
+	}
+
+	if (bam_init(bdev)) {
+		dev_err(bdev->dev, "cannot initialize bam device\n");
+		err = -EINVAL;
+		goto err_disable_clk;
+	}
+
+	bdev->channels = kzalloc(sizeof(*bdev->channels) * bdev->num_channels,
+				GFP_KERNEL);
+
+	if (!bdev->channels) {
+		dev_err(bdev->dev, "unable to allocate channels\n");
+		err = -ENOMEM;
+		goto err_disable_clk;
+	}
+
+	/* allocate and initialize channels */
+	INIT_LIST_HEAD(&bdev->common.channels);
+
+	for (i = 0; i < bdev->num_channels; i++)
+		bam_channel_init(bdev, &bdev->channels[i], i);
+
+	/* set max dma segment size */
+	bdev->common.dev = bdev->dev;
+	bdev->common.dev->dma_parms = &bdev->dma_parms;
+	if (dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE)) {
+		dev_err(bdev->dev, "cannot set maximum segment size\n");
+		goto err_disable_clk;
+	}
+
+	/* set capabilities */
+	dma_cap_zero(bdev->common.cap_mask);
+	dma_cap_set(DMA_SLAVE, bdev->common.cap_mask);
+
+	/* initialize dmaengine apis */
+	bdev->common.device_alloc_chan_resources = bam_alloc_chan;
+	bdev->common.device_free_chan_resources = bam_free_chan;
+	bdev->common.device_prep_slave_sg = bam_prep_slave_sg;
+	bdev->common.device_control = bam_control;
+	bdev->common.device_issue_pending = bam_issue_pending;
+	bdev->common.device_tx_status = bam_tx_status;
+	bdev->common.dev = bdev->dev;
+
+	dma_async_device_register(&bdev->common);
+
+	if (pdev->dev.of_node) {
+		err = of_dma_controller_register(pdev->dev.of_node,
+				bam_dma_xlate, &bdev->common);
+
+		if (err) {
+			dev_err(bdev->dev, "failed to register of_dma\n");
+			goto err_unregister_dma;
+		}
+	}
+
+	return 0;
+
+err_unregister_dma:
+	dma_async_device_unregister(&bdev->common);
+err_free_irq:
+	free_irq(bdev->irq, bdev);
+err_disable_clk:
+	clk_disable_unprepare(bdev->bamclk);
+err_unmap_mem:
+	iounmap(bdev->regs);
+err_free_bamdev:
+	if (bdev)
+		kfree(bdev->channels);
+	kfree(bdev);
+err_no_bdev:
+	return err;
+}
+
+static int bam_dma_remove(struct platform_device *pdev)
+{
+	struct bam_device *bdev;
+
+	bdev = dev_get_drvdata(&pdev->dev);
+	dev_set_drvdata(&pdev->dev, NULL);
+
+	dma_async_device_unregister(&bdev->common);
+
+	if (bdev) {
+		free_irq(bdev->irq, bdev);
+		clk_disable_unprepare(bdev->bamclk);
+		iounmap(bdev->regs);
+		kfree(bdev->channels);
+	}
+
+	kfree(bdev);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id bam_of_match[] = {
+	{ .compatible = "qcom,bam", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, bam_of_match);
+#endif
+
+static struct platform_driver bam_dma_driver = {
+	.probe = bam_dma_probe,
+	.remove = bam_dma_remove,
+	.driver = {
+		.name = "bam-dma-engine",
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(bam_of_match),
+	},
+};
+
+static int __init bam_dma_init(void)
+{
+	return platform_driver_register(&bam_dma_driver);
+}
+
+static void __exit bam_dma_exit(void)
+{
+	return platform_driver_unregister(&bam_dma_driver);
+}
+
+arch_initcall(bam_dma_init);
+module_exit(bam_dma_exit);
+
+MODULE_AUTHOR("Andy Gross <[email-masked]>");
+MODULE_DESCRIPTION("MSM BAM DMA engine driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/msm_bam_dma_priv.h b/drivers/dma/msm_bam_dma_priv.h
new file mode 100644
index 0000000..4d6a10c7
--- /dev/null
+++ b/drivers/dma/msm_bam_dma_priv.h
@@ -0,0 +1,286 @@
+/*
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MSM_BAM_DMA_PRIV_H__
+#define __MSM_BAM_DMA_PRIV_H__
+
+#include <linux/dmaengine.h>
+
+enum bam_channel_mode {
+	BAM_PIPE_MODE_BAM2BAM = 0,	/* BAM to BAM aka device to device */
+	BAM_PIPE_MODE_SYSTEM,		/* BAM to/from System Memory */
+};
+
+enum bam_channel_dir {
+	BAM_PIPE_CONSUMER = 0,	/* channel reads from data-fifo or memory */
+	BAM_PIPE_PRODUCER,	/* channel writes to data-fifo or memory */
+};
+
+struct bam_desc_hw {
+	u32 addr;		/* Buffer physical address */
+	u32 size:16;		/* Buffer size in bytes */
+	u32 flags:16;
+};
+
+#define DESC_FLAG_INT	(1<<15)
+#define DESC_FLAG_EOT	(1<<14)
+#define DESC_FLAG_EOB	(1<<13)
+
+struct bam_async_desc {
+	struct list_head node;
+	struct dma_async_tx_descriptor txd;
+	u32 num_desc;
+	enum bam_channel_dir dir;
+	u32 fifo_pos;
+	struct bam_desc_hw desc[0];
+};
+
+static inline struct bam_async_desc *to_bam_async_desc(
+		struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct bam_async_desc, txd);
+}
+
+
+#define BAM_CTRL			0x0000
+#define BAM_REVISION			0x0004
+#define BAM_SW_REVISION			0x0080
+#define BAM_NUM_PIPES			0x003C
+#define BAM_TIMER			0x0040
+#define BAM_TIMER_CTRL			0x0044
+#define BAM_DESC_CNT_TRSHLD		0x0008
+#define BAM_IRQ_SRCS			0x000C
+#define BAM_IRQ_SRCS_MSK		0x0010
+#define BAM_IRQ_SRCS_UNMASKED		0x0030
+#define BAM_IRQ_STTS			0x0014
+#define BAM_IRQ_CLR			0x0018
+#define BAM_IRQ_EN			0x001C
+#define BAM_CNFG_BITS			0x007C
+#define BAM_IRQ_SRCS_EE(x)		(0x0800 + ((x) * 0x80))
+#define BAM_IRQ_SRCS_MSK_EE(x)		(0x0804 + ((x) * 0x80))
+#define BAM_P_CTRL(x)			(0x1000 + ((x) * 0x1000))
+#define BAM_P_RST(x)			(0x1004 + ((x) * 0x1000))
+#define BAM_P_HALT(x)			(0x1008 + ((x) * 0x1000))
+#define BAM_P_IRQ_STTS(x)		(0x1010 + ((x) * 0x1000))
+#define BAM_P_IRQ_CLR(x)		(0x1014 + ((x) * 0x1000))
+#define BAM_P_IRQ_EN(x)			(0x1018 + ((x) * 0x1000))
+#define BAM_P_EVNT_DEST_ADDR(x)		(0x182C + ((x) * 0x1000))
+#define BAM_P_EVNT_REG(x)		(0x1818 + ((x) * 0x1000))
+#define BAM_P_SW_OFSTS(x)		(0x1800 + ((x) * 0x1000))
+#define BAM_P_DATA_FIFO_ADDR(x)		(0x1824 + ((x) * 0x1000))
+#define BAM_P_DESC_FIFO_ADDR(x)		(0x181C + ((x) * 0x1000))
+#define BAM_P_EVNT_TRSHLD(x)		(0x1828 + ((x) * 0x1000))
+#define BAM_P_FIFO_SIZES(x)		(0x1820 + ((x) * 0x1000))
+
+union bam_ctrl {
+	u32 value;
+	struct {
+		u32 bam_sw_rst:1;
+		u32 bam_en:1;
+		u32 reserved3:2;
+		u32 bam_en_accum:1;
+		u32 testbus_sel:7;
+		u32 reserved2:1;
+		u32 bam_desc_cache_sel:2;
+		u32 bam_cached_desc_store:1;
+		u32 ibc_disable:1;
+		u32 reserved1:15;
+	} bits;
+};
+
+union bam_revision {
+	u32 value;
+	struct {
+		u32 revision:8;
+		u32 num_ees:4;
+		u32 reserved1:1;
+		u32 ce_buffer_size:1;
+		u32 axi_active:1;
+		u32 use_vmidmt:1;
+		u32 secured:1;
+		u32 bam_has_no_bypass:1;
+		u32 high_frequency_bam:1;
+		u32 inactiv_tmrs_exst:1;
+		u32 num_inactiv_tmrs:1;
+		u32 desc_cache_depth:2;
+		u32 cmd_desc_en:1;
+		u32 inactiv_tmr_base:8;
+	} bits;
+};
+
+union bam_sw_revision {
+	u32 value;
+	struct {
+		u32 step:16;
+		u32 minor:12;
+		u32 major:4;
+	} bits;
+};
+
+union bam_num_pipes {
+	u32 value;
+	struct {
+		u32 bam_num_pipes:8;
+		u32 reserved:8;
+		u32 periph_non_pipe_grp:8;
+		u32 bam_non_pipe_grp:8;
+	} bits;
+};
+
+union bam_irq_srcs_msk {
+	u32 value;
+	struct {
+		u32 p_irq_msk:31;
+		u32 bam_irq_msk:1;
+	} bits;
+};
+
+union bam_cnfg_bits {
+	u32 value;
+	struct {
+		u32 obsolete:2;
+		u32 bam_pipe_cnfg:1;
+		u32 obsolete2:1;
+		u32 reserved:7;
+		u32 bam_full_pipe:1;
+		u32 bam_no_ext_p_rst:1;
+		u32 bam_ibc_disable:1;
+		u32 bam_sb_clk_req:1;
+		u32 bam_psm_csw_req:1;
+		u32 bam_psm_p_res:1;
+		u32 bam_au_p_res:1;
+		u32 bam_si_p_res:1;
+		u32 bam_wb_p_res:1;
+		u32 bam_wb_blk_csw:1;
+		u32 bam_wb_csw_ack_idl:1;
+		u32 bam_wb_retr_svpnt:1;
+		u32 bam_wb_dsc_avl_p_rst:1;
+		u32 bam_reg_p_en:1;
+		u32 bam_psm_p_hd_data:1;
+		u32 bam_au_accumed:1;
+		u32 bam_cd_enable:1;
+		u32 reserved2:4;
+	} bits;
+};
+
+union bam_pipe_ctrl {
+	u32 value;
+	struct {
+		u32 reserved:1;
+		u32 p_en:1;
+		u32 reserved2:1;
+		u32 p_direction:1;
+		u32 p_sys_strm:1;
+		u32 p_sys_mode:1;
+		u32 p_auto_eob:1;
+		u32 p_auto_eob_sel:2;
+		u32 p_prefetch_limit:2;
+		u32 p_write_nwd:1;
+		u32 reserved3:4;
+		u32 p_lock_group:5;
+		u32 reserved4:11;
+	} bits;
+};
+
+/* BAM_DESC_CNT_TRSHLD */
+#define CNT_TRSHLD		0xffff
+#define DEFAULT_CNT_THRSHLD	0x4
+
+/* BAM_IRQ_SRCS */
+#define BAM_IRQ			(0x1 << 31)
+#define P_IRQ			0x7fffffff
+
+/* BAM_IRQ_SRCS_MSK */
+#define BAM_IRQ_MSK		(0x1 << 31)
+#define P_IRQ_MSK		0x7fffffff
+
+/* BAM_IRQ_STTS */
+#define BAM_TIMER_IRQ		(0x1 << 4)
+#define BAM_EMPTY_IRQ		(0x1 << 3)
+#define BAM_ERROR_IRQ		(0x1 << 2)
+#define BAM_HRESP_ERR_IRQ	(0x1 << 1)
+
+/* BAM_IRQ_CLR */
+#define BAM_TIMER_CLR		(0x1 << 4)
+#define BAM_EMPTY_CLR		(0x1 << 3)
+#define BAM_ERROR_CLR		(0x1 << 2)
+#define BAM_HRESP_ERR_CLR	(0x1 << 1)
+
+/* BAM_IRQ_EN */
+#define BAM_TIMER_EN		(0x1 << 4)
+#define BAM_EMPTY_EN		(0x1 << 3)
+#define BAM_ERROR_EN		(0x1 << 2)
+#define BAM_HRESP_ERR_EN	(0x1 << 1)
+
+/* BAM_P_IRQ_EN */
+#define P_PRCSD_DESC_EN		(0x1 << 0)
+#define P_TIMER_EN		(0x1 << 1)
+#define P_WAKE_EN		(0x1 << 2)
+#define P_OUT_OF_DESC_EN	(0x1 << 3)
+#define P_ERR_EN		(0x1 << 4)
+#define P_TRNSFR_END_EN		(0x1 << 5)
+#define P_DEFAULT_IRQS_EN	(P_PRCSD_DESC_EN | P_ERR_EN | P_TRNSFR_END_EN)
+
+/* BAM_P_SW_OFSTS */
+#define P_SW_OFSTS_MASK		0xffff
+
+#define BAM_DESC_FIFO_SIZE	SZ_32K
+#define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1)
+#define BAM_MAX_DATA_SIZE	(SZ_32K - 8)
+
+struct bam_chan {
+	struct dma_chan common;
+	struct bam_device *device;
+	u32 id;
+	u32 ee;
+	bool idle;
+	struct bam_dma_slave_config bam_slave;	/* runtime configuration */
+
+	struct tasklet_struct tasklet;
+	spinlock_t lock;		/* descriptor lock */
+
+	struct list_head pending;	/* desc pending queue */
+	struct list_head active;	/* desc running queue */
+
+	struct bam_desc_hw *fifo_virt;
+	dma_addr_t fifo_phys;
+
+	/* fifo markers */
+	unsigned short head;		/* start of active descriptor entries */
+	unsigned short tail;		/* end of active descriptor entries */
+};
+
+static inline struct bam_chan *to_bam_chan(struct dma_chan *common)
+{
+	return container_of(common, struct bam_chan, common);
+}
+
+struct bam_device {
+	void __iomem *regs;
+	struct device *dev;
+	struct dma_device common;
+	struct device_dma_parameters dma_parms;
+	struct bam_chan *channels;
+	u32 num_channels;
+	u32 num_ees;
+	unsigned long enabled_ees;
+	u32 feature;
+	int irq;
+	struct clk *bamclk;
+};
+
+static inline struct bam_device *to_bam_device(struct dma_device *common)
+{
+	return container_of(common, struct bam_device, common);
+}
+
+#endif /* __MSM_BAM_DMA_PRIV_H__ */
diff --git a/include/linux/msm_bam_dma.h b/include/linux/msm_bam_dma.h
new file mode 100644
index 0000000..a358dba
--- /dev/null
+++ b/include/linux/msm_bam_dma.h
@@ -0,0 +1,27 @@
+/*
+ * msm_bam_dma.h - MSM BAM DMA engine Driver
+ *
+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef __MSM_BAM_DMA_H__
+#define __MSM_BAM_DMA_H__
+
+#include <linux/dmaengine.h>
+
+struct bam_dma_slave_config {
+	struct dma_slave_config slave;
+
+	/* BAM specific slave config starts here */
+	u16 desc_threshold;
+};
+
+#endif /* __MSM_BAM_DMA_H__ */
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation