From: plaes@plaes•org (Priit Laes)
To: linux-arm-kernel@lists•infradead.org
Subject: [linux-sunxi] [PATCH 0/9] mfd: axp20x: Add support for AXP809 PMIC
Date: Sun, 21 Aug 2016 09:51:25 +0300 [thread overview]
Message-ID: <1471762285.581.1.camel@plaes.org> (raw)
In-Reply-To: <20160821021125.1521-1-wens@csie.org>
On Sun, 2016-08-21 at 10:11 +0800, Chen-Yu Tsai wrote:
> Hi everyone,
>
> This series adds support for X-Powers' AXP806 PMIC. This is the
> secondary
> PMIC accompanying Allwinner's A80 SoC. For now, only the regulators
> are
> supported. While the AXP806 supports standalone operation, no
> hardware
> exists, so this will not be supported.
Title says AXP809, but in text and in subsequent patches there's also
806/809 confusion.
>
> Patch 1 adds AXP806 to the axp20x bindings.
>
> Patch 2 adds AXP806 support to the axp20x mfd driver.
>
> Patch 3 fixes regulator output adjustment during regulator
> registration
> so it doesn't fail if the higher or lower bounds of its voltage
> constraints
> don't match up with the regulator's voltage granularity.
>
> Patch 4 adds AXP806 support to the axp20x regulator driver.
>
> Patch 5 adds the unused SW switch output of the AXP809 PMIC on the
> A80
> Optimus board. This was accidentally left out of the AXP809 series.
>
> Patch 6 adds the unused SW switch output of the AXP809 PMIC on the
> Cubieboard 4. This was accidentally left out of the AXP809 series.
>
> Patch 7 enables AXP809 support on the A80 Optimus board.
>
> Patch 8 enables AXP809 support on the Cubieboard 4.
>
> Patch 9 disables EHCI1 on the A80 Optimus board.
>
>
> Regards
> ChenYu
>
> Chen-Yu Tsai (9):
> ? mfd: axp20x: Add bindings for AXP806 PMIC
> ? mfd: axp20x: Add support for AXP806 PMIC
> ? regulator: core: Try full range when adjusting regulators to
> ????constraints
> ? regulator: axp20x: support AXP806 variant
> ? ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused
> ? ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused
> ? ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and
> ????regulators
> ? ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and
> ????regulators
> ? ARM: dts: sun9i: a80-optimus: Disable EHCI1
>
> ?Documentation/devicetree/bindings/mfd/axp20x.txt |??28 +++++-
> ?arch/arm/boot/dts/sun9i-a80-cubieboard4.dts??????| 116
> +++++++++++++++++++++
> ?arch/arm/boot/dts/sun9i-a80-optimus.dts??????????| 123
> ++++++++++++++++++++++-
> ?drivers/mfd/axp20x-rsb.c?????????????????????????|???1 +
> ?drivers/mfd/axp20x.c?????????????????????????????|??72 +++++++++++++
> ?drivers/regulator/axp20x-regulator.c?????????????| 117
> +++++++++++++++++++--
> ?drivers/regulator/core.c?????????????????????????|???8 +-
> ?include/linux/mfd/axp20x.h???????????????????????|??60 +++++++++++
> ?8 files changed, 508 insertions(+), 17 deletions(-)
>
> --?
> 2.9.3
>
prev parent reply other threads:[~2016-08-21 6:51 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-21 2:11 [PATCH 0/9] mfd: axp20x: Add support for AXP809 PMIC Chen-Yu Tsai
2016-08-21 2:11 ` [PATCH 1/9] mfd: axp20x: Add bindings for AXP806 PMIC Chen-Yu Tsai
2016-08-23 17:51 ` Rob Herring
2016-08-21 2:11 ` [PATCH 2/9] mfd: axp20x: Add support " Chen-Yu Tsai
2016-08-21 4:15 ` [linux-sunxi] " Julian Calaby
2016-08-21 2:11 ` [PATCH 3/9] regulator: core: Try full range when adjusting regulators to constraints Chen-Yu Tsai
2016-08-22 16:29 ` Mark Brown
2016-08-22 17:52 ` Rask Ingemann Lambertsen
2016-08-22 18:09 ` Mark Brown
2016-08-23 4:17 ` Chen-Yu Tsai
2016-08-23 10:40 ` Mark Brown
2016-08-22 16:29 ` Mark Brown
2016-08-21 2:11 ` [PATCH 4/9] regulator: axp20x: support AXP806 variant Chen-Yu Tsai
2016-08-22 16:52 ` Mark Brown
2016-08-21 2:11 ` [PATCH 5/9] ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused Chen-Yu Tsai
2016-08-21 2:11 ` [PATCH 6/9] ARM: dts: sun9i: cubieboard4: " Chen-Yu Tsai
2016-08-21 2:11 ` [PATCH 7/9] ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators Chen-Yu Tsai
2016-08-21 2:11 ` [PATCH 8/9] ARM: dts: sun9i: cubieboard4: " Chen-Yu Tsai
2016-08-21 2:11 ` [PATCH 9/9] ARM: dts: sun9i: a80-optimus: Disable EHCI1 Chen-Yu Tsai
2016-08-21 6:51 ` Priit Laes [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1471762285.581.1.camel@plaes.org \
--to=plaes@plaes$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox