Subject: [PATCH 5/7] ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Nanopi M1

From: [email-masked] (Philipp Rossak)
Date: Wed, 30 Aug 2017 05:01:08 +0200

From: Philipp Rossak <[email-masked]>

The dwmac-sun8i hardware is present on the Nanopi M1.
It uses the internal PHY.

Signed-off-by: Philipp Rossak <[email-masked]>
---
 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
index 3a2ccdb..c77fbca 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts
@@ -45,6 +45,10 @@
 / {
 	model = "FriendlyArm NanoPi M1";
 	compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
+
+	aliases {
+		ethernet0 = &emac;
+	};
 };
 
 &ehci1 {
@@ -55,6 +59,13 @@
 	status = "okay";
 };
 
+&emac {
+	phy-handle = <&int_mii_phy>;
+	phy-mode = "mii";
+	allwinner,leds-active-low;
+	status = "okay";
+};
+
 &ir {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ir_pins_a>;
-- 
2.7.4