Subject: [PATCH v2 1/3] arm64: dts: imx: Add i.mx8mm dtsi support

From: Jacky Bai <[email-masked]>
Date: Tue, 12 Mar 2019 05:44:53 +0000

The i.MX8M Mini is new SOC of the i.MX8M family. it is
focused on delivering the latest and greatest video and
audio experience combining state-of-the-art media-specific
features with high-performance processing while optimized
for lowest power consumption. The i.MX 8M Mini Media Applications
Processor is  14nm FinFET product of the growing i.MX8M family
targeting the consumer & industrial market. It is built in 14LPP
to achieve both high performance and low power consumption
and relies on a powerful fully coherent core complex based on
a quad Cortex-A53 cluster with video and graphics accelerators

This patch adds the basic dtsi support for i.MX8MM.

Signed-off-by: Jacky Bai <[email-masked]>
---
 change v1->v2:
 - removed unnecessary 'okay' status
 - change AIPS's address-cells and size-cells to '1'
 - remove sdma's undocumented property
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 717 ++++++++++++++++++++++++++++++
 1 file changed, 717 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mm.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
new file mode 100644
index 0000000..47740d6
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -0,0 +1,717 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include <dt-bindings/clock/imx8mm-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx8mm-pinfunc.h"
+
+/ {
+	compatible = "fsl,imx8mm";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &fec1;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &ecspi3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		A53_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			next-level-cache = <&A53_L2>;
+		};
+
+		A53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	clk_ext2: clock-ext2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext2";
+	};
+
+	clk_ext3: clock-ext3 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext3";
+	};
+
+	clk_ext4: clock-ext4 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency= <133000000>;
+		clock-output-names = "clk_ext4";
+	};
+
+	gic: interrupt-controller@38800000 {
+		compatible = "arm,gic-v3";
+		reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
+		      <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7
+			     (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
+		clock-frequency = <8000000>;
+		arm,no-tick-in-suspend;
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x3e000000>;
+
+		aips1: bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
+				status = "disabled";
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
+				status = "disabled";
+			};
+
+			sdma2: dma-controller@302c0000 {
+				compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
+				reg = <0x302c0000 0x10000>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
+					 <&clk IMX8MM_CLK_SDMA2_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			sdma3: dma-controller@302b0000 {
+				compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
+				 <&clk IMX8MM_CLK_SDMA3_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			iomuxc: pinctrl@30330000 {
+				compatible = "fsl,imx8mm-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "fsl,imx8mq-ocotp", "fsl,imx7d-ocotp", "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
+				/* For nvmem subnodes */
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx8mm-anatop", "syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp{
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap =<&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			clk: clock-controller@30380000 {
+				compatible = "fsl,imx8mm-ccm";
+				reg = <0x30380000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
+					 <&clk_ext3>, <&clk_ext4>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
+					      "clk_ext3", "clk_ext4";
+			};
+
+			src: src@30390000 {
+				compatible = "fsl,imx8mm-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+
+			gpc: gpc@303a0000 {
+				compatible = "fsl,imx8mm-gpc", "syscon";
+				reg = <0x303a0000 0x10000>;
+				interrupt-controller;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#interrupt-cells = <3>;
+			};
+		};
+
+		aips2: bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
+					<&clk IMX8MM_CLK_PWM1_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
+					 <&clk IMX8MM_CLK_PWM2_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
+					 <&clk IMX8MM_CLK_PWM3_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
+					 <&clk IMX8MM_CLK_PWM4_ROOT>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		aips3: bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			ecspi1: ecspi@30820000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30820000 0x10000>;
+				interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
+					 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi2: ecspi@30830000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30830000 0x10000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
+					 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			ecspi3: ecspi@30840000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
+				reg = <0x30840000 0x10000>;
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
+					 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx8mm-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
+					 <&clk IMX8MM_CLK_UART1_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx8mm-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
+					 <&clk IMX8MM_CLK_UART3_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx8mm-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
+					 <&clk IMX8MM_CLK_UART2_ROOT>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx8mq-uart",
+					     "fsl,imx6q-uart", "fsl,imx21-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
+					 <&clk IMX8MM_CLK_UART4_ROOT>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			usdhc1: mmc@30b40000 {
+				compatible = "fsl,imx8mq-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_DUMMY>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC1_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX8MM_CLK_USDHC1>;
+				assigned-clock-rates = <400000000>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@30b50000 {
+				compatible = "fsl,imx8mq-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_DUMMY>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC2_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: mmc@30b60000 {
+				compatible = "fsl,imx8mq-usdhc", "fsl,imx7d-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_DUMMY>,
+					 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
+					 <&clk IMX8MM_CLK_USDHC3_ROOT>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX8MM_CLK_USDHC3_ROOT>;
+				assigned-clock-rates = <400000000>;
+				fsl,tuning-start-tap = <20>;
+				fsl,tuning-step= <2>;
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			sdma1: dma-controller@30bd0000 {
+				compatible = "fsl,imx8mq-sdma", "fsl,imx7d-sdma";
+				reg = <0x30bd0000 0x10000>;
+				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
+					 <&clk IMX8MM_CLK_SDMA1_ROOT>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET1_ROOT>,
+					 <&clk IMX8MM_CLK_ENET_TIMER>,
+					 <&clk IMX8MM_CLK_ENET_REF>,
+					 <&clk IMX8MM_CLK_ENET_PHY_REF>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
+						  <&clk IMX8MM_CLK_ENET_TIMER>,
+						  <&clk IMX8MM_CLK_ENET_REF>,
+						  <&clk IMX8MM_CLK_ENET_TIMER>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
+							 <&clk IMX8MM_SYS_PLL2_100M>,
+							 <&clk IMX8MM_SYS_PLL2_125M>;
+				assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
+				stop-mode = <&gpr 0x10 3>;
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				fsl,wakeup_irq = <2>;
+				status = "disabled";
+			};
+
+		};
+
+		aips4: bus@32c00000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usbotg1: usb@32e40000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e40000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
+						  <&clk IMX8MM_CLK_USB_CORE_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
+							 <&clk IMX8MM_SYS_PLL1_100M>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				status = "disabled";
+			};
+
+			usbphynop1: usbphynop1 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+				clock-names = "main_clk";
+			};
+
+			usbmisc1: usbmisc@32e40200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x32e40200 0x200>;
+			};
+
+			usbotg2: usb@32e50000 {
+				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x32e50000 0x200>;
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
+				clock-names = "usb1_ctrl_root_clk";
+				assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>,
+						  <&clk IMX8MM_CLK_USB_CORE_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>,
+							 <&clk IMX8MM_SYS_PLL1_100M>;
+				fsl,usbphy = <&usbphynop2>;
+				fsl,usbmisc = <&usbmisc2 0>;
+				status = "disabled";
+			};
+
+			usbphynop2: usbphynop2 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+				assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+				clock-names = "main_clk";
+			};
+
+			usbmisc2: usbmisc@32e50200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x32e50200 0x200>;
+			};
+
+		};
+
+		dma_apbh: dma-apbh@33000000 {
+			compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
+			reg = <0x33000000 0x2000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+			#dma-cells = <1>;
+			dma-channels = <4>;
+			clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+		};
+
+		gpmi: gpmi-nand@33002000{
+			compatible = "fsl,imx7d-gpmi-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
+			reg-names = "gpmi-nand", "bch";
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "bch";
+			clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
+			<&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
+			clock-names = "gpmi_io", "gpmi_bch_apb";
+			dmas = <&dma_apbh 0>;
+			dma-names = "rx-tx";
+			status = "disabled";
+		};
+	};
+};
-- 
1.9.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel