Subject: Re: [PATCH v2 9/9] rtc: Add support for the MediaTek MT6358 RTC

From: Yingjoe Chen <[email-masked]>
Date: Thu, 21 Mar 2019 17:51:26 +0800

Hi,

Should use 'rtc: mt6397: ' as prefix for this patch.

On Mon, 2019-03-11 at 11:46 +0800, Hsin-Hsiung Wang wrote:
> From: Ran Bi <[email-masked]>
> 
> This add support for the MediaTek MT6358 RTC. MT6397 mfd will pass
> RTC_WRTGR address offset to RTC driver.
> 
> Signed-off-by: Ran Bi <[email-masked]>
> ---
>  drivers/rtc/rtc-mt6397.c | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c
> index f85f1fc..c8a0090 100644
> --- a/drivers/rtc/rtc-mt6397.c
> +++ b/drivers/rtc/rtc-mt6397.c
> @@ -27,7 +27,7 @@
>  #define RTC_BBPU		0x0000
>  #define RTC_BBPU_CBUSY		BIT(6)
>  
> -#define RTC_WRTGR		0x003c
> +#define RTC_WRTGR_DEFAULT	0x003c
>  
>  #define RTC_IRQ_STA		0x0002
>  #define RTC_IRQ_STA_AL		BIT(0)
> @@ -78,6 +78,7 @@ struct mt6397_rtc {
>  	struct regmap		*regmap;
>  	int			irq;
>  	u32			addr_base;
> +	u32			wrtgr_offset;
>  };
>  
>  static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
> @@ -86,7 +87,8 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
>  	int ret;
>  	u32 data;
>  
> -	ret = regmap_write(rtc->regmap, rtc->addr_base + RTC_WRTGR, 1);
> +	ret = regmap_write(rtc->regmap,
> +			   rtc->addr_base + rtc->wrtgr_offset, 1);
>  	if (ret < 0)
>  		return ret;
>  
> @@ -341,6 +343,15 @@ static int mtk_rtc_probe(struct platform_device *pdev)
>  	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	rtc->addr_base = res->start;
>  
> +	res = platform_get_resource(pdev, IORESOURCE_REG, 0);
> +	if (res) {
> +		rtc->wrtgr_offset = res->start;
> +		dev_info(&pdev->dev, "register offset:%d\n", rtc->wrtgr_offset);
> +	} else {
> +		rtc->wrtgr_offset = RTC_WRTGR_DEFAULT;
> +		dev_err(&pdev->dev, "Failed to get register offset\n");
> +	}
> +

Since this will be passed by MFD, do we still need to keep the DEFAULT?
Any case this platform_get_resource will failed?

It's too bad HW changed this offset, but I'm not sure about passing this
information from MFD. We have 1 register that have different offset now,
and might have others for future chips, adding each one by
IORESOURCE_IRQ doesn't looks like a good solution. Keeping this
information in RTC driver only also looks better.

Joe.C

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel