Subject: Re: [RFC PATCH V2 1/4] dt-bindings: mt8183: Added FD dt-bindings

From: CK Hu <[email-masked]>
Date: Fri, 12 Jul 2019 15:16:54 +0800

Hi, Jerry:

On Tue, 2019-07-09 at 16:41 +0800, Jerry-ch Chen wrote:
> From: Jerry-ch Chen <[email-masked]>
> 
> This patch adds DT binding documentation for the Face Detection (FD)
> unit of the Mediatek's mt8183 SoC.
> 
> Signed-off-by: Jerry-ch Chen <[email-masked]>
> ---
>  .../bindings/media/mediatek,mt8183-fd.txt          | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/mediatek,mt8183-fd.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8183-fd.txt b/Documentation/devicetree/bindings/media/mediatek,mt8183-fd.txt
> new file mode 100644
> index 0000000..0837223
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8183-fd.txt
> @@ -0,0 +1,33 @@
> +* Mediatek Face Detection Unit (FD)
> +
> +Face Detection (FD) unit is a typical memory-to-memory HW device.
> +It provides hardware accelerated face detection function, and it
> +is able to detect different poses of faces. FD will writre result
> +of detected face into memory as output.
> +
> +Required properties:
> +- compatible: "mediatek,mt8183-fd"
> +- mediatek,scp : the node of system control processor (SCP), see
> +  Documentation/devicetree/bindings/remoteproc/mtk,scp.txt for details.
> +- iommus: should point to the 3 entries:  M4U_PORT_CAM_FDVT_RP,
> +  M4U_PORT_CAM_FDVT_WR and M4U_PORT_CAM_FDVT_RB.  (Please see
> +  Documentation/devicetree/bindings/iommu/mediatek,iommu.txt for details.)
> +- reg: Physical base address and length of the register space.
> +- interrupts: interrupt number to the cpu.
> +- clocks : must contain the FDVT clock, see
> +  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- clock-names: must be "fd".
> +
> +Example:
> +	fd: fd@1502b000 {
> +		compatible = "mediatek,mt8183-fd";
> +		mediatek,scp = <&scp>;
> +		iommus = <&iommu M4U_PORT_CAM_FDVT_RP>,
> +			 <&iommu M4U_PORT_CAM_FDVT_WR>,
> +			 <&iommu M4U_PORT_CAM_FDVT_RB>;
> +		reg = <0 0x1502b000 0 0x1000>;
> +		interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_LOW>;
> +		clocks = <&imgsys CLK_IMG_FDVT>;
> +		clock-names = "fd";

This device has no power-domain?

Regards,
CK

> +	};
> +

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel