Subject: [PATCH v2 7/7] arm64: tegra: enable SMMU for SDHCI and EQOS on T194

From: Krishna Reddy <[email-masked]>
Date: Mon, 2 Sep 2019 20:32:08 -0700

Enable SMMU translations for SDHCI and EQOS transactions on T194.

Signed-off-by: Krishna Reddy <[email-masked]>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 5ae3bbf..cac3462 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -51,6 +51,7 @@
 			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
 			resets = <&bpmp TEGRA194_RESET_EQOS>;
 			reset-names = "eqos";
+			iommus = <&smmu TEGRA186_SID_EQOS>;
 			status = "disabled";
 
 			snps,write-requests = <1>;
@@ -381,6 +382,7 @@
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
 			reset-names = "sdhci";
+			iommus = <&smmu TEGRA186_SID_SDMMC1>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
 									<0x07>;
 			nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -403,6 +405,7 @@
 			clock-names = "sdhci";
 			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
 			reset-names = "sdhci";
+			iommus = <&smmu TEGRA186_SID_SDMMC3>;
 			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
 			nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -430,6 +433,7 @@
 					  <&bpmp TEGRA194_CLK_PLLC4>;
 			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
 			reset-names = "sdhci";
+			iommus = <&smmu TEGRA186_SID_SDMMC4>;
 			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
 			nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
-- 
2.1.4

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel