Subject: Re: [RFC PATCH V2 4/4] platform: mtk-isp: Add Mediatek FD driver

From: Jerry-ch Chen <[email-masked]>
Date: Wed, 4 Sep 2019 17:26:28 +0800

Hi Tomasz,

On Wed, 2019-09-04 at 17:03 +0800, Tomasz Figa wrote:
> On Wed, Sep 4, 2019 at 6:02 PM Jerry-ch Chen <[email-masked]> wrote:
> >
> > Hi Tomasz,
> >
> > On Wed, 2019-09-04 at 16:25 +0800, Tomasz Figa wrote:
> > > On Wed, Sep 4, 2019 at 5:09 PM Jerry-ch Chen <[email-masked]> wrote:
> > > >
> > > > Hi Tomasz,
> > > >
> > > > On Wed, 2019-09-04 at 14:34 +0800, Tomasz Figa wrote:
> > > > > On Wed, Sep 4, 2019 at 3:09 PM Jerry-ch Chen <[email-masked]> wrote:
> > > > > >
> > > > > > Hi Tomasz,
> > > > > >
> > > > > > On Wed, 2019-09-04 at 12:15 +0800, Tomasz Figa wrote:
> > > > > > > On Wed, Sep 4, 2019 at 12:38 PM Jerry-ch Chen
> > > > > > > <[email-masked]> wrote:
> > > > > > > >
> > > > > > > > Hi Tomasz,
> > > > > > > >
> > > > > > > > On Tue, 2019-09-03 at 20:05 +0800, Tomasz Figa wrote:
> > > > > > > > > On Tue, Sep 3, 2019 at 8:46 PM Jerry-ch Chen <[email-masked]> wrote:
> > > > > > > > > >
> > > > > > > > > > Hi Tomasz,
> > > > > > > > > >
> > > > > > > > > > On Tue, 2019-09-03 at 15:04 +0800, Tomasz Figa wrote:
> > > > > > > > > > > On Tue, Sep 3, 2019 at 3:44 PM Jerry-ch Chen <[email-masked]> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > On Tue, 2019-09-03 at 13:19 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > On Mon, Sep 2, 2019 at 8:47 PM Jerry-ch Chen <[email-masked]> wrote:
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > On Fri, 2019-08-30 at 16:33 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > > On Wed, Aug 28, 2019 at 11:00 AM Jerry-ch Chen
> > > > > > > > > > > > > > > <[email-masked]> wrote:
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > On Mon, 2019-08-26 at 14:36 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > > > > Hi Jerry,
> > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > On Sun, Aug 25, 2019 at 6:18 PM Jerry-ch Chen
> > > > > > > > > > > > > > > > > <[email-masked]> wrote:
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > Hi Tomasz,
> > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > On Fri, 2019-08-02 at 16:28 +0800, Tomasz Figa wrote:
> > > > > > > > > > > > > > > > > > > Hi Jerry,
> > > > > > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > > > > > On Tue, Jul 09, 2019 at 04:41:12PM +0800, Jerry-ch Chen wrote:
[snip]
> > > > static void mtk_fd_vb2_stop_streaming(struct vb2_queue *vq)
> > > > {
> > > >         struct mtk_fd_ctx *ctx = vb2_get_drv_priv(vq);
> > > >         struct mtk_fd_dev *fd = ctx->fd_dev;
> > > >         struct vb2_v4l2_buffer *vb;
> > > >         struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> > > >         struct v4l2_m2m_queue_ctx *queue_ctx;
> > > >         u32 ret;
> > > >
> > > >         if (!fd->fd_irq_done.done)
> > >
> > > We shouldn't access internal fields of completion.
> > >
> > > >                 ret = wait_for_completion_timeout(&fd->fd_irq_done,
> > > >                                                   msecs_to_jiffies(
> > > >                                                         MTK_FD_HW_TIMEOUT));
> > > >         queue_ctx = V4L2_TYPE_IS_OUTPUT(vq->type) ?
> > > >                                         &m2m_ctx->out_q_ctx :
> > > >                                         &m2m_ctx->cap_q_ctx;
> > > >         while ((vb = v4l2_m2m_buf_remove(queue_ctx)))
> > > >                 v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> > > >
> > > >         if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> > > >                 mtk_fd_hw_disconnect(fd);
> > > > }
> > > >
> > > > I've also tried to wait completion unconditionally for both queues and
> > > > the second time will wait until timeout, as a result, it takes longer to
> > > > swap the camera every time and close the camera app.
> > >
> > > I think it should work better if we call complete_all() instead of complete().
> > >
> > Thanks,
> >
> > I use complete_all(), and it works fine now.
> >
> > static void mtk_fd_vb2_stop_streaming(struct vb2_queue *vq)
> > {
> >         struct mtk_fd_ctx *ctx = vb2_get_drv_priv(vq);
> >         struct mtk_fd_dev *fd = ctx->fd_dev;
> >         struct vb2_v4l2_buffer *vb;
> >         struct v4l2_m2m_ctx *m2m_ctx = ctx->fh.m2m_ctx;
> >         struct v4l2_m2m_queue_ctx *queue_ctx;
> >
> >         wait_for_completion_timeout(&fd->fd_irq_done,
> >                                           msecs_to_jiffies(MTK_FD_HW_TIMEOUT));
> 
> Shouldn't we still send some command to the hardware to stop? Like a
> reset. Otherwise we don't know if it isn't still accessing the memory.
> 
I thought no more jobs will be enqueued here when stop_streaming so we
don't need it.
We still could send an ipi command to reset the HW, and wait for it's
callback or we could set the register MTK_FD_REG_OFFSET_HW_ENABLE to
zero to disable the HW.

Best regards,
Jerry

> >         queue_ctx = V4L2_TYPE_IS_OUTPUT(vq->type) ?
> >                                         &m2m_ctx->out_q_ctx :
> >                                         &m2m_ctx->cap_q_ctx;
> >         while ((vb = v4l2_m2m_buf_remove(queue_ctx)))
> >                 v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
> >
> >         if (vq->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> >                 mtk_fd_hw_disconnect(fd);
> > }
> >
> > Best regards,
> > Jerry
> >
> > > Best regards,
> > > Tomasz
> >
> >

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel