From: Anson Huang <Anson.Huang@nxp•com>
To: robh+dt@kernel•org, mark.rutland@arm•com, shawnguo@kernel•org,
s.hauer@pengutronix•de, kernel@pengutronix•de,
festevam@gmail•com, l.stach@pengutronix•de, ccaione@baylibre•com,
abel.vesa@nxp•com, daniel.baluta@nxp•com,
andrew.smirnov@gmail•com, devicetree@vger•kernel.org,
linux-arm-kernel@lists•infradead.org,
linux-kernel@vger•kernel.org
Cc: Linux-imx@nxp•com
Subject: [PATCH 1/2] arm64: dts: imx8mq-evk: Adjust nodes following alphabetical sort
Date: Wed, 9 Oct 2019 10:34:38 +0800 [thread overview]
Message-ID: <1570588479-28009-1-git-send-email-Anson.Huang@nxp.com> (raw)
Adjust some nodes to make them follow alphabetical sort except
iomuxc node which is put at the end of file because of its huge
pinctrl data.
Signed-off-by: Anson Huang <Anson.Huang@nxp•com>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 46 ++++++++++++++--------------
1 file changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 0595812..6ede46f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -115,15 +115,6 @@
};
};
-&sai2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sai2>;
- assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
- assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
- assigned-clock-rates = <0>, <24576000>;
- status = "okay";
-};
-
&gpio5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wifi_reset>;
@@ -242,6 +233,29 @@
power-supply = <&sw1a_reg>;
};
+&qspi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi>;
+ status = "okay";
+
+ n25q256a: flash@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q256a", "jedec,spi-nor";
+ spi-max-frequency = <29000000>;
+ };
+};
+
+&sai2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sai2>;
+ assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
+ assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
+ assigned-clock-rates = <0>, <24576000>;
+ status = "okay";
+};
+
&snvs_pwrkey {
status = "okay";
};
@@ -261,20 +275,6 @@
status = "okay";
};
-&qspi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_qspi>;
- status = "okay";
-
- n25q256a: flash@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "micron,n25q256a", "jedec,spi-nor";
- spi-max-frequency = <29000000>;
- };
-};
-
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-10-09 2:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 2:34 Anson Huang [this message]
2019-10-09 2:34 ` [PATCH 2/2] arm64: dts: imx8mn-ddr4-evk: Move iomuxc node to end of file Anson Huang
2019-10-14 13:33 ` [PATCH 1/2] arm64: dts: imx8mq-evk: Adjust nodes following alphabetical sort Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570588479-28009-1-git-send-email-Anson.Huang@nxp.com \
--to=anson.huang@nxp$(echo .)com \
--cc=Linux-imx@nxp$(echo .)com \
--cc=abel.vesa@nxp$(echo .)com \
--cc=andrew.smirnov@gmail$(echo .)com \
--cc=ccaione@baylibre$(echo .)com \
--cc=daniel.baluta@nxp$(echo .)com \
--cc=devicetree@vger$(echo .)kernel.org \
--cc=festevam@gmail$(echo .)com \
--cc=kernel@pengutronix$(echo .)de \
--cc=l.stach@pengutronix$(echo .)de \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=mark.rutland@arm$(echo .)com \
--cc=robh+dt@kernel$(echo .)org \
--cc=s.hauer@pengutronix$(echo .)de \
--cc=shawnguo@kernel$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox