Subject: [PATCH v2 2/3] clk: meson: add support for A1 PLL clock ops

From: Jian Hu <[email-masked]>
Date: Fri, 18 Oct 2019 15:14:24 +0800

The A1 PLL design is different with previous SoCs. The PLL
internal analog modules Power-on sequence is different
with previous, and thus requires a strict register sequence to
enable the PLL. Unlike the previous series, the maximum frequency
is 6G in G12A, for A1 the maximum is 1536M.

Signed-off-by: Jian Hu <[email-masked]>
---
 drivers/clk/meson/clk-pll.c | 66 ++++++++++++++++++++++++++++++++++++++++-----
 drivers/clk/meson/clk-pll.h |  1 +
 2 files changed, 61 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index ddb1e56..b440e62 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -349,6 +349,56 @@ static void meson_clk_pll_disable(struct clk_hw *hw)
 	meson_parm_write(clk->map, &pll->en, 0);
 }
 
+/*
+ * The A1 design is different with previous SoCs.The PLL
+ * internal analog modules Power-on sequence is different with
+ * previous, different PLL has the different sequence, and
+ * thus requires a strict register sequence to enable the PLL.
+ * When set a new target frequency, the sequence should keep
+ * the same with the initial sequence. Unlike the previous series,
+ * the maximum frequency is 6G in G12A, for A1 the maximum
+ * is 1536M.
+ */
+static void meson_params_update_with_init_seq(struct clk_regmap *clk,
+				       struct meson_clk_pll_data *pll,
+				       unsigned int m, unsigned int n,
+				       unsigned int frac)
+{
+	struct parm *pm = &pll->m;
+	struct parm *pn = &pll->n;
+	struct parm *pfrac = &pll->frac;
+	const struct reg_sequence *init_regs = pll->init_regs;
+	unsigned int i, val;
+
+	for (i = 0; i < pll->init_count; i++) {
+		if (pn->reg_off == init_regs[i].reg) {
+			/* Clear M N bits and Update M N value */
+			val = init_regs[i].def;
+			val &= CLRPMASK(pn->width, pn->shift);
+			val &= CLRPMASK(pm->width, pm->shift);
+			val |= n << pn->shift;
+			val |= m << pm->shift;
+			regmap_write(clk->map, pn->reg_off, val);
+		} else if (MESON_PARM_APPLICABLE(&pll->frac) &&
+			   (pfrac->reg_off == init_regs[i].reg)) {
+			/* Clear Frac bits and Update Frac value */
+			val = init_regs[i].def;
+			val &= CLRPMASK(pfrac->width, pfrac->shift);
+			val |= frac << pfrac->shift;
+			regmap_write(clk->map, pfrac->reg_off, val);
+		} else {
+			/*
+			 * According to the PLL hardware constraint,
+			 * the left registers should be setted again.
+			 */
+			val = init_regs[i].def;
+			regmap_write(clk->map, init_regs[i].reg, val);
+		}
+		if (init_regs[i].delay_us)
+			udelay(init_regs[i].delay_us);
+	}
+}
+
 static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 				  unsigned long parent_rate)
 {
@@ -366,16 +416,20 @@ static int meson_clk_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (ret)
 		return ret;
 
+	if (MESON_PARM_APPLICABLE(&pll->frac))
+		frac = __pll_params_with_frac(rate, parent_rate, m, n, pll);
+
 	enabled = meson_parm_read(clk->map, &pll->en);
 	if (enabled)
 		meson_clk_pll_disable(hw);
 
-	meson_parm_write(clk->map, &pll->n, n);
-	meson_parm_write(clk->map, &pll->m, m);
-
-	if (MESON_PARM_APPLICABLE(&pll->frac)) {
-		frac = __pll_params_with_frac(rate, parent_rate, m, n, pll);
-		meson_parm_write(clk->map, &pll->frac, frac);
+	if (pll->strict_sequence)
+		meson_params_update_with_init_seq(clk, pll, m, n, frac);
+	else {
+		meson_parm_write(clk->map, &pll->n, n);
+		meson_parm_write(clk->map, &pll->m, m);
+		if (MESON_PARM_APPLICABLE(&pll->frac))
+			meson_parm_write(clk->map, &pll->frac, frac);
 	}
 
 	/* If the pll is stopped, bail out now */
diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
index 367efd0..d5789cef 100644
--- a/drivers/clk/meson/clk-pll.h
+++ b/drivers/clk/meson/clk-pll.h
@@ -41,6 +41,7 @@ struct meson_clk_pll_data {
 	const struct pll_params_table *table;
 	const struct pll_mult_range *range;
 	u8 flags;
+	bool strict_sequence;
 };
 
 extern const struct clk_ops meson_clk_pll_ro_ops;
-- 
1.9.1

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel