Subject: Re: [PATCH v2 08/14] soc: mediatek: cmdq: add write_s function

From: Bibby Hsieh <[email-masked]>
Date: Tue, 10 Dec 2019 15:35:05 +0800

On Wed, 2019-11-27 at 09:58 +0800, Dennis YC Hsieh wrote:
> add write_s function in cmdq helper functions which
> writes value contains in internal register to address
> with large dma access support.
> 
> Signed-off-by: Dennis YC Hsieh <[email-masked]>
> ---
>  drivers/soc/mediatek/mtk-cmdq-helper.c   | 40 ++++++++++++++++++++++++
>  include/linux/mailbox/mtk-cmdq-mailbox.h |  2 ++
>  include/linux/soc/mediatek/mtk-cmdq.h    | 12 +++++++
>  3 files changed, 54 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 9cc234f08ec5..2edbc0954d97 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -15,11 +15,18 @@
>  #define CMDQ_EOC_CMD		((u64)((CMDQ_CODE_EOC << CMDQ_OP_CODE_SHIFT)) \
>  				<< 32 | CMDQ_EOC_IRQ_EN)
>  #define CMDQ_REG_TYPE		1
> +#define CMDQ_ADDR_HIGH(addr)	((u32)(((addr) >> 16) & GENMASK(31, 0)))
> +#define CMDQ_ADDR_LOW_BIT	BIT(1)
> +#define CMDQ_ADDR_LOW(addr)	((u16)(addr) | CMDQ_ADDR_LOW_BIT)
>  
>  struct cmdq_instruction {
>  	union {
>  		u32 value;
>  		u32 mask;
> +		struct {
> +			u16 arg_c;
> +			u16 arg_b;
> +		};
>  	};
>  	union {
>  		u16 offset;
> @@ -224,6 +231,39 @@ int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  }
>  EXPORT_SYMBOL(cmdq_pkt_write_mask);
>  
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, phys_addr_t addr, u16 reg_idx,
> +		     u32 mask)
> +{
> +	struct cmdq_instruction inst = { {0} };
> +	const u16 dst_reg_idx = CMDQ_SPR_TEMP;
> +	int err;
> +
> +	if (mask != U32_MAX) {
> +		inst.op = CMDQ_CODE_MASK;
> +		inst.mask = ~mask;
> +		err = cmdq_pkt_append_command(pkt, inst);
> +		if (err < 0)
> +			return err;
> +
> +		inst.mask = 0;
> +		inst.op = CMDQ_CODE_WRITE_S_MASK;
> +	} else {
> +		inst.op = CMDQ_CODE_WRITE_S;
> +	}
> +
> +	err = cmdq_pkt_assign(pkt, dst_reg_idx, CMDQ_ADDR_HIGH(addr));
> +	if (err < 0)
> +		return err;
> +
> +	inst.arg_b_t = CMDQ_REG_TYPE;
> +	inst.sop = dst_reg_idx;
> +	inst.offset = CMDQ_ADDR_LOW(addr);
> +	inst.arg_b = reg_idx;
> +
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_write_s);
> +
>  int cmdq_pkt_wfe(struct cmdq_pkt *pkt, u16 event)
>  {
>  	struct cmdq_instruction inst = { {0} };
> diff --git a/include/linux/mailbox/mtk-cmdq-mailbox.h b/include/linux/mailbox/mtk-cmdq-mailbox.h
> index 121c3bb6d3de..8ef87e1bd03b 100644
> --- a/include/linux/mailbox/mtk-cmdq-mailbox.h
> +++ b/include/linux/mailbox/mtk-cmdq-mailbox.h
> @@ -59,6 +59,8 @@ enum cmdq_code {
>  	CMDQ_CODE_JUMP = 0x10,
>  	CMDQ_CODE_WFE = 0x20,
>  	CMDQ_CODE_EOC = 0x40,
> +	CMDQ_CODE_WRITE_S = 0x90,
> +	CMDQ_CODE_WRITE_S_MASK = 0x91,
>  	CMDQ_CODE_LOGIC = 0xa0,
>  };
>  
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index c66b3a0da2a2..56ff1970197c 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -106,6 +106,18 @@ int cmdq_pkt_write(struct cmdq_pkt *pkt, u8 subsys, u16 offset, u32 value);
>  int cmdq_pkt_write_mask(struct cmdq_pkt *pkt, u8 subsys,
>  			u16 offset, u32 value, u32 mask);
>  
> +/**
> + * cmdq_pkt_write_s_mask() - append write_s command to the CMDQ packet
I think we need add more descriptions about difference between write.

Bibby
> + * @pkt:	the CMDQ packet
> + * @addr:	the physical address of register or dma
> + * @reg_idx:	the CMDQ internal register ID which cache source value
> + * @mask:	the specified target register mask
> + *
> + * Return: 0 for success; else the error code is returned
> + */
> +int cmdq_pkt_write_s(struct cmdq_pkt *pkt, phys_addr_t addr, u16 reg_idx,
> +		     u32 mask);
> +
>  /**
>   * cmdq_pkt_wfe() - append wait for event command to the CMDQ packet
>   * @pkt:	the CMDQ packet

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel