Subject: [PATCH v3 1/3] dt: psci: Add arm, psci-sys-reset2-vendor-param property

From: Elliot Berman <[email-masked]>
Date: Thu, 5 Mar 2020 11:05:27 -0800

Some implementors of PSCI may wish to use a different reset type than
SYSTEM_WARM_RESET. For instance, Qualcomm SoCs support an alternate
reset_type which may be used in more warm reboot scenarios than
SYSTEM_WARM_RESET permits (e.g. to reboot into recovery mode).

Reviewed-by: Sudeep Holla <[email-masked]>
Signed-off-by: Elliot Berman <[email-masked]>
---
 Documentation/devicetree/bindings/arm/psci.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 8ef8542..1a9d2dd 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -102,6 +102,13 @@ properties:
       [1] Kernel documentation - ARM idle states bindings
         Documentation/devicetree/bindings/arm/idle-states.txt
 
+  arm,psci-sys-reset2-vendor-param:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+        Vendor-specific reset type parameter to use for SYSTEM_RESET2 during
+        a warm or soft reboot. If no value is provided, then architectural
+        reset type SYSTEM_WARM_RESET is used.
+
   "#power-domain-cells":
     description:
       The number of cells in a PM domain specifier as per binding in [3].
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel