Re: [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: enable DVFS

From: Neil Armstrong <narmstrong@baylibre•com>
To: khilman@baylibre•com, jbrunet@baylibre•com
Cc: linux-amlogic@lists•infradead.org, linux-clk@vger•kernel.org,
	linux-arm-kernel@lists•infradead.org,
	linux-kernel@vger•kernel.org
Subject: Re: [PATCH v2 5/5] arm64: dts: meson-sm1-sei610: enable DVFS
Date: Mon, 26 Aug 2019 09:26:29 +0200	[thread overview]
Message-ID: <16322ca1-d66d-ccab-adf1-eddc51746305@baylibre.com> (raw)
In-Reply-To: <20190826072539.27725-6-narmstrong@baylibre.com>

On 26/08/2019 09:25, Neil Armstrong wrote:
> This enables DVFS for the Amlogic SM1 based SEI610 board by:
> - Adding the SM1 SoC OPPs taken from the vendor tree
> - Selecting the SM1 Clock controller instead of the G12A one
> - Adding the CPU rail regulator, PWM and OPPs for each CPU nodes.
> 
> Each power supply can achieve 0.69V to 1.05V using a single PWM
> output clocked at 666KHz with an inverse duty-cycle.
> 
> DVFS has been tested by running the arm64 cpuburn at [1] and cycling
> between all the possible cpufreq translations of the cpu cluster and
> checking the final frequency using the clock-measurer, script at [2].
> 
> [1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
> [2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre•com>

Sorry forgot:
Reviewed-by: Kevin Hilman <khilman@baylibre•com>
Tested-by: Kevin Hilman <khilman@baylibre•com>

> ---
>  .../boot/dts/amlogic/meson-sm1-sei610.dts     | 59 ++++++++++++++--
>  arch/arm64/boot/dts/amlogic/meson-sm1.dtsi    | 69 +++++++++++++++++++
>  2 files changed, 124 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> index 36ac2e4b970d..69966e2e0611 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts
> @@ -19,10 +19,6 @@
>  		ethernet0 = &ethmac;
>  	};
>  
> -	chosen {
> -		stdout-path = "serial0:115200n8";
> -	};
> -
>  	emmc_pwrseq: emmc-pwrseq {
>  		compatible = "mmc-pwrseq-emmc";
>  		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
> @@ -136,6 +132,25 @@
>  		regulator-always-on;
>  	};
>  
> +	vddcpu: regulator-vddcpu {
> +		/*
> +		 * SY8120B1ABC DC/DC Regulator.
> +		 */
> +		compatible = "pwm-regulator";
> +
> +		regulator-name = "VDDCPU";
> +		regulator-min-microvolt = <690000>;
> +		regulator-max-microvolt = <1050000>;
> +
> +		vin-supply = <&dc_in>;
> +
> +		pwms = <&pwm_AO_cd 1 1500 0>;
> +		pwm-dutycycle-range = <100 0>;
> +
> +		regulator-boot-on;
> +		regulator-always-on;
> +	};
> +
>  	vddio_ao1v8: regulator-vddio_ao1v8 {
>  		compatible = "regulator-fixed";
>  		regulator-name = "VDDIO_AO1V8";
> @@ -182,6 +197,34 @@
>  	hdmi-phandle = <&hdmi_tx>;
>  };
>  
> +&cpu0 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu1 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU1_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu2 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU2_CLK>;
> +	clock-latency = <50000>;
> +};
> +
> +&cpu3 {
> +	cpu-supply = <&vddcpu>;
> +	operating-points-v2 = <&cpu_opp_table>;
> +	clocks = <&clkc CLKID_CPU3_CLK>;
> +	clock-latency = <50000>;
> +};
> +
>  &ethmac {
>  	status = "okay";
>  	phy-handle = <&internal_ephy>;
> @@ -220,6 +263,14 @@
>  	clock-names = "clkin0";
>  };
>  
> +&pwm_AO_cd {
> +	pinctrl-0 = <&pwm_ao_d_e_pins>;
> +	pinctrl-names = "default";
> +	clocks = <&xtal>;
> +	clock-names = "clkin1";
> +	status = "okay";
> +};
> +
>  &pwm_ef {
>  	status = "okay";
>  	pinctrl-0 = <&pwm_e_pins>;
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> index 37064d7f66c1..2b61406b0610 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> @@ -50,6 +50,71 @@
>  			compatible = "cache";
>  		};
>  	};
> +
> +	cpu_opp_table: opp-table {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +
> +		opp-100000000 {
> +			opp-hz = /bits/ 64 <100000000>;
> +			opp-microvolt = <730000>;
> +		};
> +
> +		opp-250000000 {
> +			opp-hz = /bits/ 64 <250000000>;
> +			opp-microvolt = <730000>;
> +		};
> +
> +		opp-500000000 {
> +			opp-hz = /bits/ 64 <500000000>;
> +			opp-microvolt = <730000>;
> +		};
> +
> +		opp-667000000 {
> +			opp-hz = /bits/ 64 <666666666>;
> +			opp-microvolt = <750000>;
> +		};
> +
> +		opp-1000000000 {
> +			opp-hz = /bits/ 64 <1000000000>;
> +			opp-microvolt = <770000>;
> +		};
> +
> +		opp-1200000000 {
> +			opp-hz = /bits/ 64 <1200000000>;
> +			opp-microvolt = <780000>;
> +		};
> +
> +		opp-1404000000 {
> +			opp-hz = /bits/ 64 <1404000000>;
> +			opp-microvolt = <790000>;
> +		};
> +
> +		opp-1512000000 {
> +			opp-hz = /bits/ 64 <1500000000>;
> +			opp-microvolt = <800000>;
> +		};
> +
> +		opp-1608000000 {
> +			opp-hz = /bits/ 64 <1608000000>;
> +			opp-microvolt = <810000>;
> +		};
> +
> +		opp-1704000000 {
> +			opp-hz = /bits/ 64 <1704000000>;
> +			opp-microvolt = <850000>;
> +		};
> +
> +		opp-1800000000 {
> +			opp-hz = /bits/ 64 <1800000000>;
> +			opp-microvolt = <900000>;
> +		};
> +
> +		opp-1908000000 {
> +			opp-hz = /bits/ 64 <1908000000>;
> +			opp-microvolt = <950000>;
> +		};
> +	};
>  };
>  
>  &cecb_AO {
> @@ -60,6 +125,10 @@
>  	compatible = "amlogic,meson-sm1-clk-measure";
>  };
>  
> +&clkc {
> +	compatible = "amlogic,sm1-clkc";
> +};
> +
>  &ethmac {
>  	power-domains = <&pwrc PWRC_SM1_ETH_ID>;
>  };
> 


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel