Subject: Patch "pinctrl: bcm2835: Refactor platform data" has been added to the 5.4-stable tree

From: <[email-masked]>
Date: Thu, 27 Jan 2022 17:01:50 +0100

This is a note to let you know that I've just added the patch titled

    pinctrl: bcm2835: Refactor platform data

to the 5.4-stable tree which can be found at:
    http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
     pinctrl-bcm2835-refactor-platform-data.patch
and it can be found in the queue-5.4 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree,
please let <[email-masked]> know about it.

>From foo@baz Thu Jan 27 04:40:37 PM CET 2022
From: Florian Fainelli <[email-masked]>
Date: Tue, 25 Jan 2022 11:42:17 -0800
Subject: pinctrl: bcm2835: Refactor platform data
To: [email-masked]
Cc: Stefan Wahren <[email-masked]>, Nicolas Saenz Julienne <[email-masked]>, Linus Walleij <[email-masked]>, Florian Fainelli <[email-masked]>, Rob Herring <[email-masked]>, Mark Rutland <[email-masked]>, Ray Jui <[email-masked]>, Scott Branden <[email-masked]>, [email-masked] (maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...), Eric Anholt <[email-masked]>, Stefan Wahren <[email-masked]>, Nicolas Saenz Julienne <[email-masked]>, Phil Elwell <[email-masked]>, [email-masked] (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), [email-masked] (open list), [email-masked] (open list:PIN CONTROL SUBSYSTEM), [email-masked] (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), [email-masked] (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE)
Message-ID: <[email-masked]>

From: Stefan Wahren <[email-masked]>

commit 90bfaf028d61a6d523c685b63c2bcc94eebb8057 upstream

This prepares the platform data to be easier to extend for more GPIOs.
Except of this there is no functional change.

Signed-off-by: Stefan Wahren <[email-masked]>
Link: https://lore.kernel.org/r/[email-masked]
Reviewed-by: Nicolas Saenz Julienne <[email-masked]>
Signed-off-by: Linus Walleij <[email-masked]>
Signed-off-by: Florian Fainelli <[email-masked]>
Signed-off-by: Greg Kroah-Hartman <[email-masked]>
---
 drivers/pinctrl/bcm/pinctrl-bcm2835.c |   57 ++++++++++++++++++++++++++--------
 1 file changed, 44 insertions(+), 13 deletions(-)

--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -82,6 +82,7 @@ struct bcm2835_pinctrl {
 
 	struct pinctrl_dev *pctl_dev;
 	struct gpio_chip gpio_chip;
+	struct pinctrl_desc pctl_desc;
 	struct pinctrl_gpio_range gpio_range;
 
 	raw_spinlock_t irq_lock[BCM2835_NUM_BANKS];
@@ -1051,7 +1052,7 @@ static const struct pinconf_ops bcm2711_
 	.pin_config_set = bcm2711_pinconf_set,
 };
 
-static struct pinctrl_desc bcm2835_pinctrl_desc = {
+static const struct pinctrl_desc bcm2835_pinctrl_desc = {
 	.name = MODULE_NAME,
 	.pins = bcm2835_gpio_pins,
 	.npins = ARRAY_SIZE(bcm2835_gpio_pins),
@@ -1061,19 +1062,47 @@ static struct pinctrl_desc bcm2835_pinct
 	.owner = THIS_MODULE,
 };
 
-static struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
+static const struct pinctrl_desc bcm2711_pinctrl_desc = {
+	.name = MODULE_NAME,
+	.pins = bcm2835_gpio_pins,
+	.npins = ARRAY_SIZE(bcm2835_gpio_pins),
+	.pctlops = &bcm2835_pctl_ops,
+	.pmxops = &bcm2835_pmx_ops,
+	.confops = &bcm2711_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+static const struct pinctrl_gpio_range bcm2835_pinctrl_gpio_range = {
 	.name = MODULE_NAME,
 	.npins = BCM2835_NUM_GPIOS,
 };
 
+struct bcm_plat_data {
+	const struct gpio_chip *gpio_chip;
+	const struct pinctrl_desc *pctl_desc;
+	const struct pinctrl_gpio_range *gpio_range;
+};
+
+static const struct bcm_plat_data bcm2835_plat_data = {
+	.gpio_chip = &bcm2835_gpio_chip,
+	.pctl_desc = &bcm2835_pinctrl_desc,
+	.gpio_range = &bcm2835_pinctrl_gpio_range,
+};
+
+static const struct bcm_plat_data bcm2711_plat_data = {
+	.gpio_chip = &bcm2835_gpio_chip,
+	.pctl_desc = &bcm2711_pinctrl_desc,
+	.gpio_range = &bcm2835_pinctrl_gpio_range,
+};
+
 static const struct of_device_id bcm2835_pinctrl_match[] = {
 	{
 		.compatible = "brcm,bcm2835-gpio",
-		.data = &bcm2835_pinconf_ops,
+		.data = &bcm2835_plat_data,
 	},
 	{
 		.compatible = "brcm,bcm2711-gpio",
-		.data = &bcm2711_pinconf_ops,
+		.data = &bcm2711_plat_data,
 	},
 	{}
 };
@@ -1082,6 +1111,7 @@ static int bcm2835_pinctrl_probe(struct
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
+	const struct bcm_plat_data *pdata;
 	struct bcm2835_pinctrl *pc;
 	struct gpio_irq_chip *girq;
 	struct resource iomem;
@@ -1108,7 +1138,13 @@ static int bcm2835_pinctrl_probe(struct
 	if (IS_ERR(pc->base))
 		return PTR_ERR(pc->base);
 
-	pc->gpio_chip = bcm2835_gpio_chip;
+	match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
+	if (!match)
+		return -EINVAL;
+
+	pdata = match->data;
+
+	pc->gpio_chip = *pdata->gpio_chip;
 	pc->gpio_chip.parent = dev;
 	pc->gpio_chip.of_node = np;
 
@@ -1159,19 +1195,14 @@ static int bcm2835_pinctrl_probe(struct
 		return err;
 	}
 
-	match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
-	if (match) {
-		bcm2835_pinctrl_desc.confops =
-			(const struct pinconf_ops *)match->data;
-	}
-
-	pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
+	pc->pctl_desc = *pdata->pctl_desc;
+	pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
 	if (IS_ERR(pc->pctl_dev)) {
 		gpiochip_remove(&pc->gpio_chip);
 		return PTR_ERR(pc->pctl_dev);
 	}
 
-	pc->gpio_range = bcm2835_pinctrl_gpio_range;
+	pc->gpio_range = *pdata->gpio_range;
 	pc->gpio_range.base = pc->gpio_chip.base;
 	pc->gpio_range.gc = &pc->gpio_chip;
 	pinctrl_add_gpio_range(pc->pctl_dev, &pc->gpio_range);

Patches currently in stable-queue which might be from [email-masked] are

queue-5.4/pinctrl-bcm2835-drop-unused-define.patch
queue-5.4/arm-dts-gpio-ranges-property-is-now-required.patch
queue-5.4/pinctrl-bcm2835-add-support-for-wake-up-interrupts.patch
queue-5.4/pinctrl-bcm2835-change-init-order-for-gpio-hogs.patch
queue-5.4/pinctrl-bcm2835-refactor-platform-data.patch
queue-5.4/pinctrl-bcm2835-match-bcm7211-compatible-string.patch
queue-5.4/pinctrl-bcm2835-add-support-for-all-gpios-on-bcm2711.patch

_______________________________________________
linux-arm-kernel mailing list
[email-masked]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel