Subject: [PATCH v4 09/19] clocksource: sh_cmt: Add DT support

From: [email-masked] (Laurent Pinchart)
Date: Fri, 04 Jul 2014 15:15:37 +0200

On Monday 16 June 2014 17:07:21 Laurent Pinchart wrote:
> Document DT bindings and parse them in the CMT driver.
> 
> Cc: devicetree at vger.kernel.org
> Signed-off-by: Laurent Pinchart <[email-masked]>
> Tested-by: Simon Horman <[email-masked]>
> ---
>  .../devicetree/bindings/timer/renesas,cmt.txt      | 47 +++++++++++++++
>  drivers/clocksource/sh_cmt.c                       | 66 +++++++++++++------
>  2 files changed, 95 insertions(+), 18 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/timer/renesas,cmt.txt
> 
> diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt
> b/Documentation/devicetree/bindings/timer/renesas,cmt.txt new file mode
> 100644
> index 0000000..643cfff
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt
> @@ -0,0 +1,47 @@
> +* Renesas R-Car Compare Match Timer (CMT)
> +
> +The CMT is a multi-channel 16/32/48-bit timer/counter with configurable
> clock
> +inputs and programmable compare match.
> +
> +Channels share hardware resources but their counter and compare match value
> +are independent. A particular CMT instance can implement only a subset of
> the
> +channels supported by the CMT model. Channel indices represent the hardware
> +position of the channel in the CMT and don't match the channel numbers in
> the
> +datasheets.
> +
> +Required Properties:
> +
> +  - compatible: must contain one of the following.
> +    - "renesas,cmt-32" for the 32-bit CMT
> +		(CMT0 on sh7372, sh73a0 and r8a7740)
> +    - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support
> +		(CMT[234] on sh7372, sh73a0 and r8a7740)
> +    - "renasas,cmt-48" for the 48-bit CMT

Simon has spotted a nasty typo here and below in the OF match table. I'll fix 
that and resubmit the pull request.

> +		(CMT1 on sh7372, sh73a0 and r8a7740)
> +    - "renesas,cmt-48-gen2" for the second generation 48-bit CMT
> +		(CMT[01] on r8a73a4, r8a7790 and r8a7791)
> +
> +  - reg: base address and length of the registers block for the timer
> module.
> +  - interrupts: interrupt-specifier for the timer, one per channel.
> +  - clocks: a list of phandle + clock-specifier pairs, one for each entry
> +    in clock-names.
> +  - clock-names: must contain "fck" for the functional clock.
> +
> +  - renesas,channels-mask: bitmask of the available channels.
> +
> +
> +Example: R8A7790 (R-Car H2) CMT0 node
> +
> +	CMT0 on R8A7790 implements hardware channels 5 and 6 only and names
> +	them channels 0 and 1 in the documentation.
> +
> +	cmt0: timer at ffca0000 {
> +		compatible = "renesas,cmt-48-gen2";
> +		reg = <0 0xffca0000 0 0x1004>;
> +		interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
> +			     <0 142 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
> +		clock-names = "fck";
> +
> +		renesas,channels-mask = <0x60>;
> +	};
> diff --git a/drivers/clocksource/sh_cmt.c b/drivers/clocksource/sh_cmt.c
> index 4d00e4b..09a93c4 100644
> --- a/drivers/clocksource/sh_cmt.c
> +++ b/drivers/clocksource/sh_cmt.c
> @@ -24,6 +24,7 @@
>  #include <linux/ioport.h>
>  #include <linux/irq.h>
>  #include <linux/module.h>
> +#include <linux/of.h>
>  #include <linux/platform_device.h>
>  #include <linux/pm_domain.h>
>  #include <linux/pm_runtime.h>
> @@ -122,6 +123,7 @@ struct sh_cmt_device {
> 
>  	struct sh_cmt_channel *channels;
>  	unsigned int num_channels;
> +	unsigned int hw_channels;
> 
>  	bool has_clockevent;
>  	bool has_clocksource;
> @@ -924,10 +926,35 @@ static int sh_cmt_map_memory(struct sh_cmt_device
> *cmt) return 0;
>  }
> 
> +static const struct platform_device_id sh_cmt_id_table[] = {
> +	{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
> +	{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
> +	{ "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },
> +	{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
> +	{ "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
> +
> +static const struct of_device_id sh_cmt_of_table[] __maybe_unused = {
> +	{ .compatible = "renesas,cmt-32", .data = &sh_cmt_info[SH_CMT_32BIT] },
> +	{ .compatible = "renesas,cmt-32-fast", .data =
> &sh_cmt_info[SH_CMT_32BIT_FAST] }, +	{ .compatible = "renasas,cmt-48",
> .data = &sh_cmt_info[SH_CMT_48BIT] }, +	{ .compatible =
> "renesas,cmt-48-gen2", .data = &sh_cmt_info[SH_CMT_48BIT_GEN2] }, +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sh_cmt_of_table);
> +
> +static int sh_cmt_parse_dt(struct sh_cmt_device *cmt)
> +{
> +	struct device_node *np = cmt->pdev->dev.of_node;
> +
> +	return of_property_read_u32(np, "renesas,channels-mask",
> +				    &cmt->hw_channels);
> +}
> +
>  static int sh_cmt_setup(struct sh_cmt_device *cmt, struct platform_device
> *pdev) {
> -	struct sh_timer_config *cfg = pdev->dev.platform_data;
> -	const struct platform_device_id *id = pdev->id_entry;
>  	unsigned int mask;
>  	unsigned int i;
>  	int ret;
> @@ -936,13 +963,26 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt,
> struct platform_device *pdev) cmt->pdev = pdev;
>  	raw_spin_lock_init(&cmt->lock);
> 
> -	if (!cfg) {
> +	if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
> +		const struct of_device_id *id;
> +
> +		id = of_match_node(sh_cmt_of_table, pdev->dev.of_node);
> +		cmt->info = id->data;
> +
> +		ret = sh_cmt_parse_dt(cmt);
> +		if (ret < 0)
> +			return ret;
> +	} else if (pdev->dev.platform_data) {
> +		struct sh_timer_config *cfg = pdev->dev.platform_data;
> +		const struct platform_device_id *id = pdev->id_entry;
> +
> +		cmt->info = (const struct sh_cmt_info *)id->driver_data;
> +		cmt->hw_channels = cfg->channels_mask;
> +	} else {
>  		dev_err(&cmt->pdev->dev, "missing platform data\n");
>  		return -ENXIO;
>  	}
> 
> -	cmt->info = (const struct sh_cmt_info *)id->driver_data;
> -
>  	/* Get hold of clock. */
>  	cmt->clk = clk_get(&cmt->pdev->dev, "fck");
>  	if (IS_ERR(cmt->clk)) {
> @@ -960,8 +1000,7 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt,
> struct platform_device *pdev) goto err_clk_unprepare;
> 
>  	/* Allocate and setup the channels. */
> -	cmt->num_channels = hweight8(cfg->channels_mask);
> -
> +	cmt->num_channels = hweight8(cmt->hw_channels);
>  	cmt->channels = kzalloc(cmt->num_channels * sizeof(*cmt->channels),
>  				GFP_KERNEL);
>  	if (cmt->channels == NULL) {
> @@ -973,7 +1012,7 @@ static int sh_cmt_setup(struct sh_cmt_device *cmt,
> struct platform_device *pdev) * Use the first channel as a clock event
> device and the second channel * as a clock source. If only one channel is
> available use it for both. */
> -	for (i = 0, mask = cfg->channels_mask; i < cmt->num_channels; ++i) {
> +	for (i = 0, mask = cmt->hw_channels; i < cmt->num_channels; ++i) {
>  		unsigned int hwidx = ffs(mask) - 1;
>  		bool clocksource = i == 1 || cmt->num_channels == 1;
>  		bool clockevent = i == 0;
> @@ -1044,21 +1083,12 @@ static int sh_cmt_remove(struct platform_device
> *pdev) return -EBUSY; /* cannot unregister clockevent and clocksource */ }
> 
> -static const struct platform_device_id sh_cmt_id_table[] = {
> -	{ "sh-cmt-16", (kernel_ulong_t)&sh_cmt_info[SH_CMT_16BIT] },
> -	{ "sh-cmt-32", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT] },
> -	{ "sh-cmt-32-fast", (kernel_ulong_t)&sh_cmt_info[SH_CMT_32BIT_FAST] },
> -	{ "sh-cmt-48", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT] },
> -	{ "sh-cmt-48-gen2", (kernel_ulong_t)&sh_cmt_info[SH_CMT_48BIT_GEN2] },
> -	{ }
> -};
> -MODULE_DEVICE_TABLE(platform, sh_cmt_id_table);
> -
>  static struct platform_driver sh_cmt_device_driver = {
>  	.probe		= sh_cmt_probe,
>  	.remove		= sh_cmt_remove,
>  	.driver		= {
>  		.name	= "sh_cmt",
> +		.of_match_table = of_match_ptr(sh_cmt_of_table),
>  	},
>  	.id_table	= sh_cmt_id_table,
>  };

-- 
Regards,

Laurent Pinchart