From: ben-linux@fluff•org (Ben Dooks)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 5/9] Add support for red flashing LED on Acer n35
Date: Thu, 6 May 2010 02:22:58 +0100 [thread overview]
Message-ID: <20100506012258.GZ6684@trinity.fluff.org> (raw)
In-Reply-To: <4BE1EE8C.8040900@vscht.cz>
On Thu, May 06, 2010 at 12:17:48AM +0200, Pinkava J. wrote:
>
how about one patch for all the leds?
> Signed-off-by: Jiri Pinkava <jiri.pinkava@vscht•cz>
> ---
> arch/arm/mach-s3c2410/mach-n30.c | 16 ++++++++++++++++
> 1 files changed, 16 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
> index aeabbff..b83eabd 100644
> --- a/arch/arm/mach-s3c2410/mach-n30.c
> +++ b/arch/arm/mach-s3c2410/mach-n30.c
> @@ -283,6 +283,13 @@ static struct s3c24xx_led_platdata n30_warning_led_pdata = {
> .def_trigger = "",
> };
>
> +static struct s3c24xx_led_platdata n35_warning_led_pdata = {
> + .name = "warning_led",
> + .flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
> + .gpio = S3C2410_GPD(9),
> + .def_trigger = "",
> +};
> +
> static struct platform_device n30_blue_led = {
> .name = "s3c24xx_led",
> .id = 1,
> @@ -307,6 +314,14 @@ static struct platform_device n30_warning_led = {
> },
> };
>
> +static struct platform_device n35_warning_led = {
> + .name = "s3c24xx_led",
> + .id = 2,
> + .dev = {
> + .platform_data = &n35_warning_led_pdata,
> + },
> +};
> +
> static struct s3c2410fb_display n30_display __initdata = {
> .type = S3C2410_LCDCON1_TFT,
> .width = 240,
> @@ -355,6 +370,7 @@ static struct platform_device *n35_devices[] __initdata = {
> &s3c_device_usbgadget,
> &n35_button_device,
> &n35_blue_led,
> + &n35_warning_led,
> };
>
> static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
> --
> 1.7.1
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
next prev parent reply other threads:[~2010-05-06 1:22 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-05-05 22:06 [PATCH 1/9] Enable Acer n35 architecture if Acer n30 is selected Pinkava J.
2010-05-05 22:12 ` [PATCH 2/9] fix: suspended wrong USB port on Acer n35 Pinkava J.
2010-05-05 22:13 ` [PATCH 3/9] Add RTC platform device for Acer n30 / " Pinkava J.
2010-05-05 22:17 ` [PATCH 4/9] Add support for blue LED on " Pinkava J.
2010-05-05 22:17 ` [PATCH 5/9] Add support for red flashing " Pinkava J.
2010-05-05 22:18 ` [PATCH 6/9] Enable wake-up by Power button " Pinkava J.
2010-05-05 22:20 ` [PATCH 7/9] Add support for MMC card reader on Acer n30 / " Pinkava J.
2010-05-05 22:22 ` [PATCH 8/9] Add support for power on/off on Acer n30 / Acer n35 MMC card reader Pinkava J.
2010-05-06 1:23 ` [PATCH 7/9] Add support for MMC card reader on Acer n30 / Acer n35 Ben Dooks
2010-05-06 1:22 ` Ben Dooks [this message]
2010-05-06 13:18 ` [PATCH 1/8] Enable Acer n35 architecture if Acer n30 is selected Pinkava J.
2010-05-06 13:19 ` [PATCH 2/8] fix: suspended wrong USB port on Acer n35 Pinkava J.
2010-05-06 13:20 ` [PATCH 3/8] Add RTC platform device for Acer n30 / " Pinkava J.
2010-05-06 13:21 ` [PATCH 4/8] Add support for LEDs on " Pinkava J.
2010-05-06 13:21 ` [PATCH 5/8] Enable wake-up by Power button " Pinkava J.
2010-05-06 13:22 ` [PATCH 6/8] Add support for MMC card reader on Acer n30 / " Pinkava J.
2010-05-06 13:23 ` [PATCH 7/8] Add support for power on/off on Acer n30 / Acer n35 MMC card reader Pinkava J.
2010-05-06 13:24 ` [PATCH 8/8] Add support for backlight regulation on Acer n35 Pinkava J.
2010-05-06 13:39 ` Acer n35 patches Pinkava J.
2010-05-07 0:37 ` Ben Dooks
2010-05-12 13:26 ` Pinkava J.
2010-05-07 0:35 ` [PATCH 8/8] Add support for backlight regulation on Acer n35 Ben Dooks
2010-05-12 13:18 ` Pinkava J.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100506012258.GZ6684@trinity.fluff.org \
--to=ben-linux@fluff$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox