Subject: [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's

From: [email-masked] (Ben Dooks)
Date: Mon, 27 Sep 2010 23:36:45 +0100

On Tue, Sep 21, 2010 at 07:37:16PM +0530, Rajendra Nayak wrote:
> This patch converts the i2c driver to use PM runtime apis
> 
> Signed-off-by: Rajendra Nayak <[email-masked]>
> Cc: Kevin Hilman <[email-masked]>
> Cc: Paul Walmsley <[email-masked]>
> ---
>  drivers/i2c/busses/i2c-omap.c |   67 +++++++++++++----------------------------
>  1 files changed, 21 insertions(+), 46 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
> index 7674efb..126bde9 100644
> --- a/drivers/i2c/busses/i2c-omap.c
> +++ b/drivers/i2c/busses/i2c-omap.c
> @@ -39,6 +39,7 @@
>  #include <linux/io.h>
>  #include <linux/slab.h>
>  #include <linux/i2c-omap.h>
> +#include <linux/pm_runtime.h>
>  
>  /* I2C controller revisions */
>  #define OMAP_I2C_REV_2			0x20
> @@ -175,8 +176,6 @@ struct omap_i2c_dev {
>  	void __iomem		*base;		/* virtual */
>  	int			irq;
>  	int			reg_shift;      /* bit shift for I2C register addresses */
> -	struct clk		*iclk;		/* Interface clock */
> -	struct clk		*fclk;		/* Functional clock */
>  	struct completion	cmd_complete;
>  	struct resource		*ioarea;
>  	u32			latency;	/* maximum mpu wkup latency */
> @@ -265,45 +264,18 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
>  				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
>  }
>  
> -static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
> +static void omap_i2c_unidle(struct omap_i2c_dev *dev)
>  {
> -	int ret;
> +	struct platform_device *pdev;
> +	struct omap_i2c_bus_platform_data *pdata;
>  
> -	dev->iclk = clk_get(dev->dev, "ick");
> -	if (IS_ERR(dev->iclk)) {
> -		ret = PTR_ERR(dev->iclk);
> -		dev->iclk = NULL;
> -		return ret;
> -	}
> +	WARN_ON(!dev->idle);
>  
> -	dev->fclk = clk_get(dev->dev, "fck");
> -	if (IS_ERR(dev->fclk)) {
> -		ret = PTR_ERR(dev->fclk);
> -		if (dev->iclk != NULL) {
> -			clk_put(dev->iclk);
> -			dev->iclk = NULL;
> -		}
> -		dev->fclk = NULL;
> -		return ret;
> -	}
> +	pdev = to_platform_device(dev->dev);
> +	pdata = pdev->dev.platform_data;
>  
> -	return 0;
> -}
> +	pm_runtime_get_sync(&pdev->dev);
>  
> -static void omap_i2c_put_clocks(struct omap_i2c_dev *dev)
> -{
> -	clk_put(dev->fclk);
> -	dev->fclk = NULL;
> -	clk_put(dev->iclk);
> -	dev->iclk = NULL;
> -}
> -
> -static void omap_i2c_unidle(struct omap_i2c_dev *dev)
> -{
> -	WARN_ON(!dev->idle);
> -
> -	clk_enable(dev->iclk);
> -	clk_enable(dev->fclk);
>  	if (cpu_is_omap34xx()) {
>  		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
>  		omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
> @@ -326,10 +298,15 @@ static void omap_i2c_unidle(struct omap_i2c_dev *dev)
>  
>  static void omap_i2c_idle(struct omap_i2c_dev *dev)
>  {
> +	struct platform_device *pdev;
> +	struct omap_i2c_bus_platform_data *pdata;
>  	u16 iv;
>  
>  	WARN_ON(dev->idle);
>  
> +	pdev = to_platform_device(dev->dev);
> +	pdata = pdev->dev.platform_data;
> +
>  	dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
>  	if (dev->rev >= OMAP_I2C_REV_ON_4430)
>  		omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1);
> @@ -345,8 +322,8 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev)
>  		omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
>  	}
>  	dev->idle = 1;
> -	clk_disable(dev->fclk);
> -	clk_disable(dev->iclk);
> +
> +	pm_runtime_put_sync(&pdev->dev);
>  }
>  
>  static int omap_i2c_init(struct omap_i2c_dev *dev)
> @@ -356,6 +333,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>  	unsigned long fclk_rate = 12000000;
>  	unsigned long timeout;
>  	unsigned long internal_clk = 0;
> +	struct clk *fclk;
>  
>  	if (dev->rev >= OMAP_I2C_REV_2) {
>  		/* Disable I2C controller before soft reset */
> @@ -414,7 +392,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>  		 * always returns 12MHz for the functional clock, we can
>  		 * do this bit unconditionally.
>  		 */
> -		fclk_rate = clk_get_rate(dev->fclk);
> +		fclk = clk_get(dev->dev, "fck");
> +		fclk_rate = clk_get_rate(fclk);
>  
>  		/* TRM for 5912 says the I2C clock must be prescaled to be
>  		 * between 7 - 12 MHz. The XOR input clock is typically
> @@ -443,7 +422,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev)
>  			internal_clk = 9600;
>  		else
>  			internal_clk = 4000;
> -		fclk_rate = clk_get_rate(dev->fclk) / 1000;
> +		fclk = clk_get(dev->dev, "fck");
> +		fclk_rate = clk_get_rate(fclk) / 1000;

You don't put the clk after getting it and using it once?
  
>  		/* Compute prescaler divisor */
>  		psc = fclk_rate / internal_clk;
> @@ -1046,14 +1026,12 @@ omap_i2c_probe(struct platform_device *pdev)
>  	else
>  		dev->reg_shift = 2;
>  
> -	if ((r = omap_i2c_get_clocks(dev)) != 0)
> -		goto err_iounmap;
> -
>  	if (cpu_is_omap44xx())
>  		dev->regs = (u8 *) omap4_reg_map;
>  	else
>  		dev->regs = (u8 *) reg_map;
>  
> +	pm_runtime_enable(&pdev->dev);
>  	omap_i2c_unidle(dev);
>  
>  	dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
> @@ -1125,8 +1103,6 @@ err_free_irq:
>  err_unuse_clocks:
>  	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
>  	omap_i2c_idle(dev);
> -	omap_i2c_put_clocks(dev);
> -err_iounmap:
>  	iounmap(dev->base);
>  err_free_mem:
>  	platform_set_drvdata(pdev, NULL);
> @@ -1148,7 +1124,6 @@ omap_i2c_remove(struct platform_device *pdev)
>  	free_irq(dev->irq, dev);
>  	i2c_del_adapter(&dev->adapter);
>  	omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
> -	omap_i2c_put_clocks(dev);
>  	iounmap(dev->base);
>  	kfree(dev);
>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -- 
> 1.5.4.7
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
-- 
Ben

Q:      What's a light-year?
A:      One-third less calories than a regular year.