Subject: [PATCH v2 8/9] OMAP4: omap4panda: Enable audio support

From: [email-masked] (Tony Lindgren)
Date: Thu, 22 Dec 2011 10:15:18 -0800

* Peter Ujfalusi <[email-masked]> [111222 09:36]:
> Hi Tony,
> 
> On 12/22/2011 07:32 PM, Tony Lindgren wrote:
> > Hi,
> > 
> >> @@ -548,6 +588,19 @@ void omap4_panda_display_init(void)
> >>  	omap_display_init(&omap4_panda_dss_data);
> >>  }
> >>  
> >> +static void omap4_panda_audio_init(void)
> >> +{
> >> +	if (cpu_is_omap4430()) {
> >> +		/* PandaBoard 4430 */
> >> +		panda_abe_audio_data.card_name = "PandaBoard";
> >> +		/* Audio in is connected to HSMIC */
> >> +		panda_abe_audio_data.has_hsmic = 1;
> >> +	} else {
> >> +		/* PandaBoard ES */
> >> +		panda_abe_audio_data.card_name = "PandaBoardES";
> >> +	}
> >> +}
> >> +
> > 
> > Please move the cpu_is_omap4430() check from audio_init to..
> > 
> >>  static void __init omap4_panda_init(void)
> >>  {
> >>  	int package = OMAP_PACKAGE_CBS;
> >> @@ -560,6 +613,7 @@ static void __init omap4_panda_init(void)
> >>  		pr_err("error setting wl12xx data\n");
> >>  
> >>  	omap4_panda_i2c_init();
> >> +	omap4_panda_audio_init();
> >>  	platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
> >>  	platform_device_register(&omap_vwlan_device);
> >>  	board_serial_init();
> > 
> > ..omap4_panda_init() instead and set some flag that other
> > devices can use too so we don't have cpu_is_omap tests
> > for each init function. I'd assume that will be needed for
> > other devices too, but that's just a guess of course :)
> 
> I was planning to have omap4_panda_init_rev(), which would be called
> just before the i2c_init().
> If other drivers need to differentiate between Panda and PandaES they
> can add their code there.

OK, sounds good to me. Maybe just make omap4_panda_init_rev() do
the cpu_is_omap check for now and then you can patch in the dynamic
detection later on?
 
> We can use GPIOs to get the board ID, I'm looking at those for a
> followup patch.
> The only issue is that the ID1 GPIO number is different between 4430,
> and 4460 based Panda.
> We can have similar revision handling as we have for Beagle at the end.

OK great.

Tony