Subject: [PATCH] ARM: S3C24XX: add support for second irq set of S3C2416

From: [email-masked] (Heiko Stübner)
Date: Sat, 3 Mar 2012 22:19:45 +0100

The S3C2416 has a separate second interrupt register-set to support
additional irqs. This patch adds the necessary constants and registers
the irq handlers for it.

Signed-off-by: Heiko Stuebner <[email-masked]>
---
Patch should go on top of the current s3c24xx consolidation

 arch/arm/mach-s3c24xx/include/mach/irqs.h    |   15 ++++-
 arch/arm/mach-s3c24xx/irq-s3c2416.c          |   98 ++++++++++++++++++++++++++
 arch/arm/mach-s3c24xx/s3c2416.c              |    1 +
 arch/arm/plat-samsung/include/plat/s3c2416.h |    3 +
 4 files changed, 116 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-s3c24xx/include/mach/irqs.h b/arch/arm/mach-s3c24xx/include/mach/irqs.h
index e53b217..e120576 100644
--- a/arch/arm/mach-s3c24xx/include/mach/irqs.h
+++ b/arch/arm/mach-s3c24xx/include/mach/irqs.h
@@ -134,6 +134,17 @@
 #define IRQ_S32416_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S32416_AC97		S3C2410_IRQSUB(28)
 
+/* second interrupt-register of s3c2416/s3c2450 */
+
+#define S3C2416_IRQ(x)		S3C2410_IRQ((x)+54+29)
+#define IRQ_S3C2416_2D		S3C2416_IRQ(0)
+#define IRQ_S3C2416_IIC1	S3C2416_IRQ(1)
+#define IRQ_S3C2416_RESERVED2	S3C2416_IRQ(2)
+#define IRQ_S3C2416_RESERVED3	S3C2416_IRQ(3)
+#define IRQ_S3C2416_PCM0	S3C2416_IRQ(4)
+#define IRQ_S3C2416_PCM1	S3C2416_IRQ(5)
+#define IRQ_S3C2416_I2S0	S3C2416_IRQ(6)
+#define IRQ_S3C2416_I2S1	S3C2416_IRQ(7)
 
 /* extra irqs for s3c2440 */
 
@@ -175,7 +186,9 @@
 #define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
 #define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
 
-#if defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
+#if defined(CONFIG_CPU_S3C2416)
+#define NR_IRQS (IRQ_S3C2416_I2S1+1)
+#elif defined(CONFIG_CPU_S3C2443)
 #define NR_IRQS (IRQ_S3C2443_AC97+1)
 #else
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
index fd49f35..d92f879 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c
@@ -27,6 +27,7 @@
 #include <linux/ioport.h>
 #include <linux/device.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -192,6 +193,43 @@ static struct irq_chip s3c2416_irq_uart3 = {
 	.irq_ack	= s3c2416_irq_uart3_ack,
 };
 
+/* second interrupt register */
+
+static inline void s3c2416_irq_ack_second(struct irq_data *data)
+{
+	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+
+	__raw_writel(bitval, S3C2416_SRCPND2);
+	__raw_writel(bitval, S3C2416_INTPND2);
+}
+
+static void s3c2416_irq_mask_second(struct irq_data *data)
+{
+	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2416_INTMSK2);
+	mask |= bitval;
+	__raw_writel(mask, S3C2416_INTMSK2);
+}
+
+static void s3c2416_irq_unmask_second(struct irq_data *data)
+{
+	unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2416_INTMSK2);
+	mask &= ~bitval;
+	__raw_writel(mask, S3C2416_INTMSK2);
+}
+
+struct irq_chip s3c2416_irq_second = {
+	.irq_ack	= s3c2416_irq_ack_second,
+	.irq_mask	= s3c2416_irq_mask_second,
+	.irq_unmask	= s3c2416_irq_unmask_second,
+};
+
+
 /* IRQ initialisation code */
 
 static int __init s3c2416_add_sub(unsigned int base,
@@ -213,6 +251,42 @@ static int __init s3c2416_add_sub(unsigned int base,
 	return 0;
 }
 
+static void __init s3c2416_add_second(void)
+{
+	unsigned long pend;
+	unsigned long last;
+	int irqno;
+	int i;
+
+	/* first, clear all interrupts pending... */
+	last = 0;
+	for (i = 0; i < 4; i++) {
+		pend = __raw_readl(S3C2416_INTPND2);
+
+		if (pend == 0 || pend == last)
+			break;
+
+		__raw_writel(pend, S3C2416_SRCPND2);
+		__raw_writel(pend, S3C2416_INTPND2);
+		printk(KERN_INFO "irq: clearing pending status %08x\n",
+		       (int)pend);
+		last = pend;
+	}
+
+	for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) {
+		switch (irqno) {
+		case IRQ_S3C2416_RESERVED2:
+		case IRQ_S3C2416_RESERVED3:
+			/* no IRQ here */
+			break;
+		default:
+			irq_set_chip_and_handler(irqno, &s3c2416_irq_second,
+						 handle_edge_irq);
+			set_irq_flags(irqno, IRQF_VALID);
+		}
+	}
+}
+
 static int __init s3c2416_irq_add(struct device *dev,
 				  struct subsys_interface *sif)
 {
@@ -232,6 +306,8 @@ static int __init s3c2416_irq_add(struct device *dev,
 			&s3c2416_irq_wdtac97,
 			IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
 
+	s3c2416_add_second();
+
 	return 0;
 }
 
@@ -248,3 +324,25 @@ static int __init s3c2416_irq_init(void)
 
 arch_initcall(s3c2416_irq_init);
 
+#ifdef CONFIG_PM
+static struct sleep_save irq_save[] = {
+	SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+int s3c2416_irq_suspend(void)
+{
+	s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+	return 0;
+}
+
+void s3c2416_irq_resume(void)
+{
+	s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+	.suspend	= s3c2416_irq_suspend,
+	.resume		= s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 0e9a71c..694977e 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -105,6 +105,7 @@ int __init s3c2416_init(void)
 	register_syscore_ops(&s3c2416_pm_syscore_ops);
 #endif
 	register_syscore_ops(&s3c24xx_irq_syscore_ops);
+	register_syscore_ops(&s3c2416_irq_syscore_ops);
 
 	return device_register(&s3c2416_dev);
 }
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index de2b5bd..7178e33 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -24,6 +24,9 @@ extern void s3c2416_init_clocks(int xtal);
 extern  int s3c2416_baseclk_add(void);
 
 extern void s3c2416_restart(char mode, const char *cmd);
+
+extern struct syscore_ops s3c2416_irq_syscore_ops;
+
 #else
 #define s3c2416_init_clocks NULL
 #define s3c2416_init_uarts NULL
-- 
1.7.2.3