From: heiko@sntech•de (Heiko Stübner)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4/4] ARM: S3C24XX: Move device setup files to mach directory
Date: Tue, 6 Mar 2012 11:00:32 +0100 [thread overview]
Message-ID: <201203061100.32931.heiko@sntech.de> (raw)
In-Reply-To: <201203061057.15815.heiko@sntech.de>
Includes a small rename of the SETUP_TS option to a S3C24XX prefix.
Signed-off-by: Heiko Stuebner <heiko@sntech•de>
---
arch/arm/mach-s3c24xx/Kconfig | 7 ++++++-
arch/arm/mach-s3c24xx/Makefile | 2 ++
.../arm/{plat-s3c24xx => mach-s3c24xx}/setup-i2c.c | 0
arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-ts.c | 0
arch/arm/plat-s3c24xx/Kconfig | 5 -----
arch/arm/plat-s3c24xx/Makefile | 4 ----
6 files changed, 8 insertions(+), 10 deletions(-)
rename arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-i2c.c (100%)
rename arch/arm/{plat-s3c24xx => mach-s3c24xx}/setup-ts.c (100%)
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index df6f419..b399021 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -106,6 +106,11 @@ config S3C24XX_SIMTEC_USB
help
USB management code for common Simtec S3C24XX boards
+config S3C24XX_SETUP_TS
+ bool
+ help
+ Compile in platform device definition for Samsung TouchScreen.
+
# cpu-specific sections
if CPU_S3C2410
@@ -178,7 +183,7 @@ config ARCH_H1940
select PM_H1940 if PM
select S3C_DEV_USB_HOST
select S3C_DEV_NAND
- select S3C2410_SETUP_TS
+ select S3C24XX_SETUP_TS
help
Say Y here if you are using the HP IPAQ H1940
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 2843c81..3f39e6f 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -91,3 +91,5 @@ obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
# device setup
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
+obj-$(CONFIG_S3C24XX_SETUP_TS) += setup-ts.o
diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/mach-s3c24xx/setup-i2c.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/setup-i2c.c
rename to arch/arm/mach-s3c24xx/setup-i2c.c
diff --git a/arch/arm/plat-s3c24xx/setup-ts.c b/arch/arm/mach-s3c24xx/setup-ts.c
similarity index 100%
rename from arch/arm/plat-s3c24xx/setup-ts.c
rename to arch/arm/mach-s3c24xx/setup-ts.c
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 0338d20..21bf6ad 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -113,9 +113,4 @@ config S3C2412_IOTIMING
Intel node to select io timing code that is common to the s3c2412
and the s3c2443.
-config S3C2410_SETUP_TS
- bool
- help
- Compile in platform device definition for Samsung TouchScreen.
-
endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 27dd9c5..2467b80 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -31,7 +31,3 @@ obj-$(CONFIG_S3C24XX_DMA) += dma.o
obj-$(CONFIG_S3C2410_IOTIMING) += s3c2410-iotiming.o
obj-$(CONFIG_S3C2412_IOTIMING) += s3c2412-iotiming.o
obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
-
-# device specific setup and/or initialisation
-obj-$(CONFIG_ARCH_S3C24XX) += setup-i2c.o
-obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o
--
1.7.5.4
next prev parent reply other threads:[~2012-03-06 10:00 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-06 9:57 [PATCH 0/4] S3C24XX: Another move of code to the new mach directory Heiko Stübner
2012-03-06 9:58 ` [PATCH 1/4] ARM: S3C24XX: Move common-smdk code to " Heiko Stübner
2012-03-06 9:59 ` [PATCH 2/4] ARM: S3C24XX: move simtec-specific " Heiko Stübner
2012-03-06 9:59 ` [PATCH 3/4] ARM: S3C24XX: Consolidate Simtec extensions Heiko Stübner
2012-03-06 10:00 ` Heiko Stübner [this message]
2012-03-07 11:18 ` [PATCH 0/4] S3C24XX: Another move of code to the new mach directory Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201203061100.32931.heiko@sntech.de \
--to=heiko@sntech$(echo .)de \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox