From: arnd@arndb•de (Arnd Bergmann)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 6/8] arm: mach-armada: add support for Armada XP board with device tree
Date: Tue, 22 May 2012 17:06:27 +0000 [thread overview]
Message-ID: <201205221706.27991.arnd@arndb.de> (raw)
In-Reply-To: <20120522133417.GX24238@titan.lakedaemon.net>
On Tuesday 22 May 2012, Jason Cooper wrote:
> $ git grep -l [^@]mrvl,
>
> Documentation/devicetree/bindings/arm/mrvl.txt
> Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
> Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
> Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
> Documentation/devicetree/bindings/serial/mrvl-serial.txt
> arch/arm/boot/dts/kirkwood-dreamplug.dts
> arch/arm/boot/dts/kirkwood.dtsi
> arch/arm/boot/dts/pxa168-aspenite.dts
> arch/arm/boot/dts/pxa168.dtsi
> arch/arm/mach-mmp/mmp-dt.c
> drivers/i2c/busses/i2c-pxa.c
> drivers/rtc/rtc-mv.c
> drivers/rtc/rtc-sa1100.c
> drivers/tty/serial/pxa.c
>
> So, basically, the powerpc folks have been using "marvell", and now
> we're trying to change it to "mrvl".
>
> I can't think of a technical reason to prefer one over the other. So,
> based purely on compatibility and uniformity, I'd say stick with
> "marvell". Grant, Arnd, is there something we're missing?
>
A few are now getting merged into v3.5:
$ git grep -l [^@]mrvl,
Documentation/devicetree/bindings/arm/mrvl/intc.txt
Documentation/devicetree/bindings/arm/mrvl/mrvl.txt
Documentation/devicetree/bindings/arm/mrvl/timer.txt
Documentation/devicetree/bindings/gpio/mrvl-gpio.txt
Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
Documentation/devicetree/bindings/mtd/orion-nand.txt
Documentation/devicetree/bindings/rtc/sa1100-rtc.txt
Documentation/devicetree/bindings/serial/mrvl-serial.txt
arch/arm/boot/dts/kirkwood-dns320.dts
arch/arm/boot/dts/kirkwood-dns325.dts
arch/arm/boot/dts/kirkwood-dreamplug.dts
arch/arm/boot/dts/kirkwood-ib62x0.dts
arch/arm/boot/dts/kirkwood-iconnect.dts
arch/arm/boot/dts/kirkwood.dtsi
arch/arm/boot/dts/mmp2-brownstone.dts
arch/arm/boot/dts/mmp2.dtsi
arch/arm/boot/dts/pxa168-aspenite.dts
arch/arm/boot/dts/pxa168.dtsi
arch/arm/boot/dts/pxa910-dkb.dts
arch/arm/boot/dts/pxa910.dtsi
arch/arm/mach-mmp/irq.c
arch/arm/mach-mmp/mmp-dt.c
arch/arm/mach-mmp/mmp2-dt.c
arch/arm/mach-mmp/time.c
drivers/gpio/gpio-pxa.c
drivers/i2c/busses/i2c-pxa.c
drivers/mtd/nand/orion_nand.c
drivers/rtc/rtc-mv.c
drivers/rtc/rtc-sa1100.c
drivers/tty/serial/pxa.c
I'm fine with changing all of them from mrvl to marvell, if one
of you makes a patch, I think we can send that after all the other stuff
is merged.
This also needs an Ack from Haojian Zhuang, who has submitted the
pxa/mmp related patches adding more "mrvl," prefixes.
Arnd
next prev parent reply other threads:[~2012-05-22 17:06 UTC|newest]
Thread overview: 140+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-15 8:54 [PATCH] arm: Add basic support for new Marvell Armada SoC family Thomas Petazzoni
2012-05-15 8:54 ` [PATCH 1/8] arm: mach-armada: add headers Thomas Petazzoni
2012-05-15 9:16 ` Ben Dooks
2012-05-15 10:57 ` Ben Dooks
2012-05-15 13:21 ` Rob Herring
2012-05-15 18:42 ` Nicolas Pitre
2012-05-15 8:54 ` [PATCH 2/8] arm: mach-armada: add source files Thomas Petazzoni
2012-05-15 9:12 ` Andrew Lunn
2012-05-15 9:17 ` Thomas Petazzoni
2012-05-15 9:54 ` Ben Dooks
2012-05-15 10:00 ` Arnaud Patard (Rtp)
2012-05-15 10:37 ` Ben Dooks
2012-05-15 9:27 ` Andrew Lunn
2012-05-15 9:54 ` Ben Dooks
2012-05-15 12:46 ` Lior Amsalem
2012-05-15 9:46 ` Ben Dooks
2012-05-15 9:59 ` Gregory CLEMENT
2012-05-15 10:03 ` Andrew Lunn
2012-05-19 6:21 ` Grant Likely
2012-05-16 14:27 ` Ben Dooks
2012-05-16 15:06 ` Ben Dooks
2012-05-15 8:54 ` [PATCH 3/8] arm: mach-armada: add documentation for new device tree bindings Thomas Petazzoni
2012-05-15 11:31 ` Ben Dooks
2012-05-15 8:54 ` [PATCH 4/8] arm: mach-armada: add compilation/configuration changes Thomas Petazzoni
2012-05-15 8:54 ` [PATCH 5/8] arm: mach-armada: add support for Armada 370 board with device tree Thomas Petazzoni
2012-05-15 8:54 ` [PATCH 6/8] arm: mach-armada: add support for Armada XP " Thomas Petazzoni
2012-05-15 9:58 ` Ben Dooks
2012-05-15 13:10 ` Lior Amsalem
2012-05-15 13:19 ` Andrew Lunn
2012-05-15 14:23 ` Arnd Bergmann
2012-05-15 18:37 ` Nicolas Pitre
2012-05-17 23:31 ` Jason Cooper
2012-05-15 13:33 ` Ben Dooks
2012-05-15 13:31 ` Rob Herring
2012-05-15 13:53 ` Ben Dooks
2012-05-15 14:16 ` Thomas Petazzoni
2012-05-15 14:25 ` Arnd Bergmann
2012-05-15 14:29 ` Thomas Petazzoni
2012-05-15 14:35 ` Ben Dooks
2012-05-15 14:53 ` Rob Herring
2012-05-15 15:01 ` Ben Dooks
2012-05-15 15:30 ` Russell King - ARM Linux
2012-05-15 14:32 ` Ben Dooks
2012-05-15 14:37 ` Arnd Bergmann
2012-05-15 16:31 ` Stephen Warren
2012-05-15 19:41 ` Arnd Bergmann
2012-05-15 14:58 ` Thomas Petazzoni
2012-05-15 15:07 ` Ben Dooks
2012-05-15 15:32 ` Arnd Bergmann
2012-05-15 15:46 ` Thomas Petazzoni
2012-05-15 21:22 ` Rob Herring
2012-05-15 15:49 ` Ben Dooks
2012-05-15 19:06 ` Arnd Bergmann
2012-05-15 15:41 ` Russell King - ARM Linux
2012-05-15 15:59 ` Ben Dooks
2012-05-15 16:03 ` Russell King - ARM Linux
2012-05-17 23:35 ` Jason Cooper
2012-05-18 2:12 ` Rob Herring
2012-05-22 12:00 ` Ben Dooks
2012-05-22 13:34 ` Jason Cooper
2012-05-22 17:06 ` Arnd Bergmann [this message]
2012-05-23 2:02 ` Haojian Zhuang
2012-05-15 8:54 ` [PATCH 7/8] arm: mach-armada: add defconfig Thomas Petazzoni
2012-05-15 9:58 ` Ben Dooks
2012-05-15 12:54 ` Thomas Petazzoni
2012-05-15 8:54 ` [PATCH 8/8] arm: mach-armada: add entry to MAINTAINERS Thomas Petazzoni
2012-05-15 9:18 ` [PATCH] arm: Add basic support for new Marvell Armada SoC family Andrew Lunn
2012-05-15 9:44 ` Thomas Petazzoni
2012-05-15 9:51 ` Ben Dooks
2012-05-15 9:55 ` Thomas Petazzoni
2012-05-15 13:15 ` Andrew Lunn
2012-05-15 14:35 ` Rob Herring
2012-05-15 14:44 ` Thomas Petazzoni
2012-05-15 15:27 ` Arnd Bergmann
2012-05-15 15:39 ` Thomas Petazzoni
2012-05-15 16:26 ` Arnd Bergmann
2012-05-15 21:35 ` Arnd Bergmann
2012-05-16 0:25 ` Nicolas Pitre
2012-05-16 5:07 ` Andrew Lunn
2012-05-16 6:57 ` Arnd Bergmann
2012-05-16 6:57 ` Haojian Zhuang
2012-05-16 17:30 ` Andrew Lunn
2012-05-15 18:20 ` Nicolas Pitre
2012-05-15 16:22 ` Andrew Lunn
2012-05-15 16:25 ` Ben Dooks
2012-05-15 16:30 ` Andrew Lunn
2012-05-15 16:37 ` Ben Dooks
2012-05-16 11:12 ` Lior Amsalem
2012-05-16 11:36 ` Andrew Lunn
2012-05-16 12:00 ` Arnd Bergmann
2012-05-16 14:55 ` Lior Amsalem
2012-05-16 15:20 ` Nicolas Pitre
2012-05-16 15:28 ` Arnd Bergmann
2012-05-16 16:49 ` Nicolas Pitre
2012-05-16 19:46 ` Arnd Bergmann
2012-05-16 20:20 ` Nicolas Pitre
2012-05-16 20:34 ` Arnd Bergmann
2012-05-18 19:20 ` Jason Cooper
2012-05-22 12:03 ` Ben Dooks
2012-05-18 19:18 ` Jason Cooper
2012-05-18 20:44 ` Arnd Bergmann
2012-05-18 22:51 ` Nicolas Pitre
2012-05-19 11:24 ` Jason Cooper
2012-05-19 17:32 ` Arnd Bergmann
2012-05-20 0:45 ` Nicolas Pitre
2012-05-20 9:55 ` Russell King - ARM Linux
2012-05-20 10:58 ` Arnd Bergmann
2012-05-20 11:10 ` Russell King - ARM Linux
2012-05-21 1:30 ` Jason Cooper
2012-05-21 7:58 ` Arnd Bergmann
2012-05-21 9:30 ` Russell King - ARM Linux
2012-05-21 15:35 ` Jason Cooper
2012-05-21 16:11 ` Russell King - ARM Linux
2012-05-21 16:58 ` Jason Cooper
2012-05-21 19:40 ` Arnd Bergmann
2012-05-22 14:25 ` Nicolas Pitre
2012-05-22 16:03 ` Jason Cooper
2012-05-22 16:06 ` Ben Dooks
2012-05-22 16:16 ` Jason Cooper
2012-05-24 11:18 ` Ben Dooks
2012-05-22 17:09 ` Arnd Bergmann
2012-05-21 8:55 ` Ben Dooks
2012-05-21 9:16 ` Andrew Lunn
2012-05-21 9:27 ` Ben Dooks
2012-05-21 9:40 ` Andrew Lunn
2012-05-21 15:39 ` Jason Cooper
2012-05-21 17:27 ` Andrew Lunn
2012-05-15 11:06 ` Arnd Bergmann
2012-05-15 12:50 ` Thomas Petazzoni
2012-05-15 16:03 ` Ben Dooks
2012-05-15 11:18 ` Ben Dooks
2012-05-15 12:26 ` Lior Amsalem
2012-05-15 12:51 ` Thomas Petazzoni
2012-05-15 11:20 ` Ben Dooks
2012-05-15 12:29 ` Lior Amsalem
2012-05-15 14:55 ` Ben Dooks
2012-05-15 15:00 ` Thomas Petazzoni
2012-05-15 15:07 ` Ben Dooks
2012-05-15 15:36 ` Ben Dooks
2012-05-15 15:39 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201205221706.27991.arnd@arndb.de \
--to=arnd@arndb$(echo .)de \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox