Subject: [PATCH 3/5] ARM: omap3evm: enable VBUS switch for EHCI tranceiver

From: [email-masked] (Tony Lindgren)
Date: Fri, 6 Jul 2012 01:41:05 -0700

* Sergei Shtylyov <[email-masked]> [120620 05:10]:
> On 20-06-2012 13:14, Zumeng Chen wrote:
> >
> >This will set TWL4030.GPIO2 as output pin to drive EHCI tranceiver.
...

> >+	/* Enable VBUS switch by setting TWL4030.GPIO2DIR as output
> >+	 * for starting USB tranceiver
> >+	 */
> >+	if (get_omap3_evm_rev()>= OMAP3EVM_BOARD_GEN_2) {
> >+		u8 val;
> 
>    Empty line after declaration block wouldn't hurt...
> 

I'll apply these into devel-board branch with the extra line
added. Not taking the clock related patch 4/5 as that's something
Paul should queue.

Also note that the board-*.c files are being phased out with
devicetree support.

Regards,

Tony