Subject: [PATCH 02/10] arm: at91: move platfarm_data to include/linux/platform_data/atmel.h

From: [email-masked] (Jean-Christophe PLAGNIOL-VILLARD)
Date: Mon, 12 Nov 2012 15:06:46 +0100

On 11:54 Sat 10 Nov     , Joachim Eastwood wrote:
> Hi Jean-Christophe,
> 
> On 7 November 2012 12:22, Jean-Christophe PLAGNIOL-VILLARD
> <[email-masked]> wrote:
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email-masked]>
> > Cc: Nicolas Ferre <[email-masked]>
> > Cc: linux-ide at vger.kernel.org
> > Cc: linux-input at vger.kernel.org
> > Cc: linux-mmc at vger.kernel.org
> > Cc: linux-can at vger.kernel.org
> > Cc: netdev at vger.kernel.org
> > Cc: linux-pcmcia at lists.infradead.org
> > Cc: rtc-linux at googlegroups.com
> > Cc: spi-devel-general at lists.sourceforge.net
> > Cc: linux-serial at vger.kernel.org
> > Cc: linux-usb at vger.kernel.org
> > Cc: linux-fbdev at vger.kernel.org
> > ---
> > HI all,
> >
> >         If it's ok with everyone this will go via at91
> >         with the patch serie than clean up the include/mach
> >
> >         For preparation to switch to arm multiarch kernel
> >
> > Best Regards,
> > J.
> >  arch/arm/mach-at91/include/mach/board.h     |   55 ----------------------
> >  arch/avr32/mach-at32ap/include/mach/board.h |    7 ---
> >  drivers/ata/pata_at91.c                     |    2 +-
> >  drivers/input/touchscreen/atmel_tsadcc.c    |    2 +-
> >  drivers/mmc/host/atmel-mci.c                |    2 +-
> >  drivers/net/can/at91_can.c                  |    3 +-
> >  drivers/net/ethernet/cadence/at91_ether.c   |    2 +-
> >  drivers/pcmcia/at91_cf.c                    |    2 +-
> >  drivers/rtc/rtc-at91sam9.c                  |    2 +-
> >  drivers/spi/spi-atmel.c                     |    2 +-
> >  drivers/tty/serial/atmel_serial.c           |    2 +-
> >  drivers/usb/gadget/at91_udc.c               |    2 +-
> >  drivers/usb/gadget/atmel_usba_udc.c         |    2 +-
> >  drivers/usb/host/ohci-at91.c                |    2 +-
> >  drivers/video/atmel_lcdfb.c                 |    2 +-
> >  include/linux/platform_data/atmel.h         |   67 +++++++++++++++++++++++++++
> >  16 files changed, 80 insertions(+), 76 deletions(-)
> 
> <snip>
> 
> > diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
> > index 4e980a7..35fc6edb 100644
> > --- a/drivers/net/ethernet/cadence/at91_ether.c
> > +++ b/drivers/net/ethernet/cadence/at91_ether.c
> > @@ -31,6 +31,7 @@
> >  #include <linux/clk.h>
> >  #include <linux/gfp.h>
> >  #include <linux/phy.h>
> > +#include <linux/platform_data/atmel.h>
> >
> >  #include <asm/io.h>
> >  #include <asm/uaccess.h>
> > @@ -38,7 +39,6 @@
> >
> >  #include <mach/at91rm9200_emac.h>
> >  #include <asm/gpio.h>
> > -#include <mach/board.h>
> >
> >  #include "at91_ether.h"
> 
> The at91_ether driver in net-next does not need to be change since it
> all mach includes has already been removed by other patches and it
> includes linux/platform_data/macb.h directly.
> 
> What tree was these patches based on?
> The at91_ether driver changes has been in linux-next for a long while now.
the conflict is minor easy to handle and the cleanup need to go first on arm soc so this is
based on rc3

Best Regards,
J.