Subject: [PATCH v8 10/12] pinctrl: generic: rename input schmitt disable

From: [email-masked] (Tony Lindgren)
Date: Wed, 13 Feb 2013 15:41:27 -0800

* Haojian Zhuang <[email-masked]> [130211 09:15]:
> Rename PIN_CONFIG_INPUT_SCHMITT_DISABLE to
> PIN_CONFIG_INPUT_SCHMITT_ENABLE. It's used to make it more generialize.
> 
> Signed-off-by: Haojian Zhuang <[email-masked]>

Makes sense to me for future naming of things:

Acked-by: Tony Lindgren <[email-masked]>

> ---
>  drivers/pinctrl/pinconf-generic.c       |    2 +-
>  include/linux/pinctrl/pinconf-generic.h |    6 ++++--
>  2 files changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c
> index 4a67848..e43d2e0 100644
> --- a/drivers/pinctrl/pinconf-generic.c
> +++ b/drivers/pinctrl/pinconf-generic.c
> @@ -43,7 +43,7 @@ struct pin_config_item conf_items[] = {
>  	PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL),
>  	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL),
>  	PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL),
> -	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_DISABLE, "input schmitt disabled", NULL),
> +	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL),
>  	PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL),
>  	PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"),
>  	PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"),
> diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
> index f2daff4..93314cb 100644
> --- a/include/linux/pinctrl/pinconf-generic.h
> +++ b/include/linux/pinctrl/pinconf-generic.h
> @@ -50,7 +50,9 @@
>   *	argument is ignored.
>   * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as
>   * 	argument. The argument is in mA.
> - * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin.
> + * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
> + *      If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
> + *      schmitt-trigger mode is disabled.
>   * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in
>   *	schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis,
>   *	the threshold value is given on a custom format as argument when
> @@ -85,7 +87,7 @@ enum pin_config_param {
>  	PIN_CONFIG_DRIVE_OPEN_DRAIN,
>  	PIN_CONFIG_DRIVE_OPEN_SOURCE,
>  	PIN_CONFIG_DRIVE_STRENGTH,
> -	PIN_CONFIG_INPUT_SCHMITT_DISABLE,
> +	PIN_CONFIG_INPUT_SCHMITT_ENABLE,
>  	PIN_CONFIG_INPUT_SCHMITT,
>  	PIN_CONFIG_INPUT_DEBOUNCE,
>  	PIN_CONFIG_POWER_SOURCE,
> -- 
> 1.7.10.4
>