Subject: [PATCH] ARM: OMAP4: change the device names in usb_bind_phy

From: [email-masked] (Tony Lindgren)
Date: Thu, 16 May 2013 08:58:57 -0700

* Tomi Valkeinen <[email-masked]> [130515 03:59]:
> On 23/04/13 09:14, Kishon Vijay Abraham I wrote:
> > After the device names are created using PLATFORM_DEVID_AUTO, the old
> > device names given in usb_bind_phy are no longer valid causing the musb
> > controller not to get the phy reference. Updated the usb_bind_phy with
> > the new device names to get MUSB functional in omap4 panda.
> > 
> > Signed-off-by: Kishon Vijay Abraham I <[email-masked]>
> > ---
> > Tested in OMAP4 PANDA.
> >  arch/arm/mach-omap2/board-4430sdp.c    |    2 +-
> >  arch/arm/mach-omap2/board-omap4panda.c |    2 +-
> >  2 files changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
> > index 00d7290..56a9a4f 100644
> > --- a/arch/arm/mach-omap2/board-4430sdp.c
> > +++ b/arch/arm/mach-omap2/board-4430sdp.c
> > @@ -730,7 +730,7 @@ static void __init omap_4430sdp_init(void)
> >  	omap4_sdp4430_wifi_init();
> >  	omap4_twl6030_hsmmc_init(mmc);
> >  
> > -	usb_bind_phy("musb-hdrc.0.auto", 0, "omap-usb2.1.auto");
> > +	usb_bind_phy("musb-hdrc.2.auto", 0, "omap-usb2.3.auto");
> >  	usb_musb_init(&musb_board_data);
> >  
> >  	status = omap_ethernet_init();
> 
> I'm seeing
> 
> [    2.190155] unable to find transceiver
> [    2.190155] HS USB OTG: no transceiver configured
> [    2.190155] musb-hdrc musb-hdrc.0.auto: musb_init_controller failed
> with status -517
> [    2.207458] platform musb-hdrc.0.auto: Driver musb-hdrc requests
> probe deferral
> 
> on 4430sdp with v3.10-rc1. Does that mean that the musb-hdrc.0.auto was
> indeed correct, and the new value of musb-hdrc.2.auto is not?

Just checking.. Do you have CONFIG_OMAP_OCP2SCP=y in your .config? Sounds
like the some transceivers should depend on that for omap4.
 
> The musb-hdrc id is wrong on overo also.

Hmm has there been a fix posted for that?

Regards,

Tony