From: tony@atomide•com (Tony Lindgren)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c
Date: Wed, 12 Jun 2013 10:14:08 -0700 [thread overview]
Message-ID: <20130612171407.GM8164@atomide.com> (raw)
In-Reply-To: <20130612163124.GD8164@atomide.com>
* Tony Lindgren <tony@atomide•com> [130612 09:37]:
> * Ming Lei <tom.leiming@gmail•com> [130603 08:34]:
> > Hi,
> >
> > On Sat, May 18, 2013 at 3:17 AM, Tony Lindgren <tony@atomide•com> wrote:
> > > We can now boot with device tree. If you don't want to update u-boot,
> > > you can boot with appended DTB with the following instructions:
> > >
> > > 1. Make sure you have the appended DTB support in .config
> > >
> > > CONFIG_ARM_APPENDED_DTB=y
> > > CONFIG_ARM_ATAG_DTB_COMPAT=y
> > > CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
> > >
> > > 2. Build the zImage
> > >
> > > $ ARCH=arm CROSS_COMPILE=... make zImage
> > >
> > > 3. Build the device tree blobs
> > >
> > > $ ARCH=arm CROSS_COMPILE=... make dtbs
> > >
> > > 4. Append the correct panda dtb to zImage
> > >
> > > Depending on your hardware it's omap4-panda.dtb, omap4-panda-a4.dtb
> > > or omap4-panda-es.dtb.
> > >
> > > $ cat arch/arm/boot/zImage arch/arm/boot/dts/omap4-panda-es.dtb > /tmp/appended
> > >
> > > 5. Use mkimage to produce the appended device tree uImage
> > >
> > > $ mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 \
> > > -n "Linux" -d /tmp/appended /tmp/uImage
> >
> > I followed the above steps and tried devicetree on Pandaboard against
> > 3.10.0-rc3-next-20130528, and the board will hang during boot, but works
> > well with legacy mode.
> >
> > Hardware: Pandaboard A1
> > dtb: omap4-panda.dtb
> >
> > See 'dmesg' on below link:
> >
> > http://kernel.ubuntu.com/~ming/up/panda-dts.dmesg
> >
>
> Hmm looks like it boots to init. Maybe add initcall_debug to the cmdline in
> case there's some late_initcall that causes the issue. It's probably some
> trivial issue causing it.
Sricharan, maybe give this a quick try if you have the original pandaboard?
I only have pandaboard es.
Regards,
Tony
next prev parent reply other threads:[~2013-06-12 17:14 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-17 19:17 [PATCH 0/6] Drop legacy booting for omap4 for v3.11, boot with device tree only Tony Lindgren
2013-05-17 19:17 ` [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c Tony Lindgren
2013-05-20 9:54 ` Russell King - ARM Linux
2013-05-20 17:10 ` Tony Lindgren
2013-07-06 13:10 ` Russell King - ARM Linux
2013-07-06 13:36 ` Russell King - ARM Linux
2013-07-08 9:34 ` Tony Lindgren
2013-07-08 14:21 ` Russell King - ARM Linux
2013-07-09 8:23 ` Tony Lindgren
2013-07-12 9:09 ` Peter Ujfalusi
2013-07-22 9:40 ` Tomi Valkeinen
2013-10-27 13:26 ` Javier Martinez Canillas
2013-10-28 13:32 ` Tomi Valkeinen
2013-10-28 14:25 ` Javier Martinez Canillas
2013-07-13 2:31 ` Olof Johansson
2013-07-13 3:10 ` Olof Johansson
2013-07-15 6:55 ` Tony Lindgren
2013-07-06 21:36 ` Arnd Bergmann
2013-07-06 23:37 ` debugging options (was: Re: [PATCH 1/6] ARM: OMAP2+: Remove board-4430sdp.c) Russell King - ARM Linux
2013-05-17 19:17 ` [PATCH 2/6] ARM: OMAP2+: Remove board-omap4panda.c Tony Lindgren
2013-06-03 15:28 ` Ming Lei
2013-06-12 16:31 ` Tony Lindgren
2013-06-12 17:14 ` Tony Lindgren [this message]
2013-06-13 9:21 ` Sricharan R
2013-06-13 10:12 ` Sricharan R
2013-06-13 11:05 ` Tony Lindgren
2013-06-13 13:36 ` Ming Lei
2013-06-14 13:31 ` Ming Lei
2013-06-14 13:58 ` Ming Lei
2013-06-17 7:42 ` Sricharan R
2013-06-17 8:06 ` Arnaud Patard (Rtp)
2013-06-17 8:16 ` Ming Lei
2013-06-17 8:27 ` Tony Lindgren
2013-06-17 8:41 ` Ming Lei
2013-06-17 8:49 ` Tony Lindgren
2013-06-17 8:24 ` Tony Lindgren
2013-06-17 9:46 ` Arnaud Patard (Rtp)
2013-06-17 10:26 ` Tony Lindgren
2013-06-18 11:27 ` Tony Lindgren
2013-06-19 9:45 ` Arnaud Patard (Rtp)
2013-06-19 9:58 ` Tony Lindgren
2013-06-20 7:29 ` Arnaud Patard (Rtp)
2013-06-21 6:01 ` Tony Lindgren
2013-05-17 19:17 ` [PATCH 3/6] ARM: OMAP2+: Remove legacy mux data for omap4 Tony Lindgren
2013-05-17 19:17 ` [PATCH 4/6] ARM: OMAP2+: Remove omap4 pdata from hsmmc.c Tony Lindgren
2013-05-17 19:18 ` [PATCH 5/6] ARM: OMAP2+: Remove omap4 pdata for USB Tony Lindgren
2013-05-17 19:18 ` [PATCH 6/6] ARM: OMAP2+: Remove omap4 ocp2scp pdata Tony Lindgren
2013-05-17 20:05 ` Felipe Balbi
2013-05-21 11:53 ` Kishon Vijay Abraham I
2013-06-07 10:05 ` [PATCH 0/6] Drop legacy booting for omap4 for v3.11, boot with device tree only Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130612171407.GM8164@atomide.com \
--to=tony@atomide$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox