Subject: [PATCH] ARM: sirf: use CONFIG_SIRF rather than CONFIG_PRIMA2 where necessary

From: [email-masked] (Mike Turquette)
Date: Sun, 16 Jun 2013 11:23:35 -0700

Quoting Arnd Bergmann (2013-06-10 08:36:44)
> I got a build error today that made me realize that it is not
> possible to build a kernel for a SiRF platform without enabling
> CONFIG_PRIMA2, since a lot of common code depends on CONFIG_PRIMA2.
> 
> This fixes all occurences that appear like common SiRF code.
> 
> Signed-off-by: Arnd Bergmann <[email-masked]>

Acked-by: Mike Turquette <[email-masked]>

> ---
> 
> Barry, can you see if this patch makes sense to you?
> 
> Mark, Grant, Mike, Greg, Wolfram: would you like to get a split-out
> patch, or should I apply it in one piece to arm-soc?
> 
> There is no harm in changing just one file, they are all
> equally wrong and don't depend on one another.
> 
>  arch/arm/Makefile          | 2 +-
>  drivers/clk/Makefile       | 2 +-
>  drivers/i2c/busses/Kconfig | 2 +-
>  drivers/spi/Kconfig        | 2 +-
>  drivers/tty/serial/Kconfig | 2 +-
>  5 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 3380c4f..fcb4b48 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -169,7 +169,7 @@ machine-$(CONFIG_ARCH_OMAP1)                += omap1
>  machine-$(CONFIG_ARCH_OMAP2PLUS)       += omap2
>  machine-$(CONFIG_ARCH_ORION5X)         += orion5x
>  machine-$(CONFIG_ARCH_PICOXCELL)       += picoxcell
> -machine-$(CONFIG_ARCH_PRIMA2)          += prima2
> +machine-$(CONFIG_ARCH_SIRF)            += prima2
>  machine-$(CONFIG_ARCH_PXA)             += pxa
>  machine-$(CONFIG_ARCH_REALVIEW)                += realview
>  machine-$(CONFIG_ARCH_RPC)             += rpc
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index f41e3e3..a9f616f 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -19,7 +19,7 @@ obj-$(CONFIG_ARCH_SOCFPGA)    += socfpga/
>  obj-$(CONFIG_PLAT_SPEAR)       += spear/
>  obj-$(CONFIG_ARCH_U300)                += clk-u300.o
>  obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
> -obj-$(CONFIG_ARCH_PRIMA2)      += clk-prima2.o
> +obj-$(CONFIG_ARCH_SIRF)                += clk-prima2.o
>  obj-$(CONFIG_PLAT_ORION)       += mvebu/
>  ifeq ($(CONFIG_COMMON_CLK), y)
>  obj-$(CONFIG_ARCH_MMP)         += mmp/
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 2d030df..11c8eb8 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -676,7 +676,7 @@ config I2C_SIMTEC
>  
>  config I2C_SIRF
>         tristate "CSR SiRFprimaII I2C interface"
> -       depends on ARCH_PRIMA2
> +       depends on ARCH_SIRF
>         help
>           If you say yes to this option, support will be included for the
>           CSR SiRFprimaII I2C interface.
> diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
> index 2015897..89cbbab 100644
> --- a/drivers/spi/Kconfig
> +++ b/drivers/spi/Kconfig
> @@ -404,7 +404,7 @@ config SPI_SH_HSPI
>  
>  config SPI_SIRF
>         tristate "CSR SiRFprimaII SPI controller"
> -       depends on ARCH_PRIMA2
> +       depends on ARCH_SIRF
>         select SPI_BITBANG
>         help
>           SPI driver for CSR SiRFprimaII SoCs
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 95e66ac..7b4aa69 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -251,7 +251,7 @@ config SERIAL_SAMSUNG_CONSOLE
>  
>  config SERIAL_SIRFSOC
>          tristate "SiRF SoC Platform Serial port support"
> -        depends on ARCH_PRIMA2
> +        depends on ARCH_SIRF
>          select SERIAL_CORE
>          help
>            Support for the on-chip UART on the CSR SiRFprimaII series,