Subject: [PATCH 4/4] ARM: OMAP2+: dts: HACK: Provide alias to USB PHY clock

From: [email-masked] (Tony Lindgren)
Date: Tue, 18 Jun 2013 04:23:42 -0700

* Roger Quadros <[email-masked]> [130618 04:17]:
> Till the OMAP clocks are correctly defined in device tree, use
> this temporary hack to provide clock alias to the USB PHY clocks.
> 
> Without this, USB Host & Ethernet will not be functional with
> device tree boots on Panda and uEVM.

Thanks, this looks OK to me to have USB working until we have the
DT defined clock patches ready.

The $Subject needs updating though, just make it ARM: OMAP2+: and
leave out the dts and hack from there.

Regards,

Tony
 
> Signed-off-by: Roger Quadros <[email-masked]>
> ---
>  arch/arm/mach-omap2/board-generic.c |   23 ++++++++++++++++++++++-
>  1 files changed, 22 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
> index 88aa6b1..2b2d0de 100644
> --- a/arch/arm/mach-omap2/board-generic.c
> +++ b/arch/arm/mach-omap2/board-generic.c
> @@ -15,6 +15,7 @@
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
>  #include <linux/irqdomain.h>
> +#include <linux/clk.h>
>  
>  #include <asm/mach/arch.h>
>  
> @@ -35,6 +36,21 @@ static struct of_device_id omap_dt_match_table[] __initdata = {
>  	{ }
>  };
>  
> +/*
> + * HACK: create alias for USB host PHY clock.
> + * Remove this when clock phandle can be provided via DT
> + */
> +static void __init legacy_init_ehci_clk(char *clkname)
> +{
> +	int ret;
> +
> +	ret = clk_add_alias("main_clk", NULL, clkname, NULL);
> +	if (ret) {
> +		pr_err("%s:Failed to add main_clk alias to %s :%d\n",
> +						__func__, clkname, ret);
> +	}
> +}
> +
>  static void __init omap_generic_init(void)
>  {
>  	omap_sdrc_init(NULL, NULL);
> @@ -45,10 +61,15 @@ static void __init omap_generic_init(void)
>  	 * HACK: call display setup code for selected boards to enable omapdss.
>  	 * This will be removed when omapdss supports DT.
>  	 */
> -	if (of_machine_is_compatible("ti,omap4-panda"))
> +	if (of_machine_is_compatible("ti,omap4-panda")) {
>  		omap4_panda_display_init_of();
> +		legacy_init_ehci_clk("auxclk3_ck");
> +
> +	}
>  	else if (of_machine_is_compatible("ti,omap4-sdp"))
>  		omap_4430sdp_display_init_of();
> +	else if (of_machine_is_compatible("ti,omap5-uevm"))
> +		legacy_init_ehci_clk("auxclk1_ck");
>  }
>  
>  #ifdef CONFIG_SOC_OMAP2420
> -- 
> 1.7.4.1
>