Subject: [PATCH v2 4/5] PCI: mvebu: add support for reset on GPIO

From: [email-masked] (Thomas Petazzoni)
Date: Tue, 13 Aug 2013 22:29:43 +0200

Dear Sebastian Hesselbarth,

On Tue, 13 Aug 2013 14:25:23 +0200, Sebastian Hesselbarth wrote:

> +		port->reset_gpio = of_get_named_gpio_flags(child,
> +						   "reset-gpios", 0, &flags);
> +		if (gpio_is_valid(port->reset_gpio)) {
> +			u32 reset_udelay = 20000;
> +
> +			port->reset_active_low = flags & OF_GPIO_ACTIVE_LOW;
> +			port->reset_name = kasprintf(GFP_KERNEL,
> +				     "pcie%d.%d-reset", port->port, port->lane);
> +			of_property_read_u32(child, "reset-delay-us",
> +					     &reset_udelay);
> +
> +			ret = devm_gpio_request_one(&pdev->dev,
> +			    port->reset_gpio, GPIOF_DIR_OUT, port->reset_name);
> +			if (ret) {
> +				if (ret == -EPROBE_DEFER)
> +					return ret;
> +				continue;
> +			}
> +
> +			gpio_set_value(port->reset_gpio,
> +				       (port->reset_active_low) ? 1 : 0);
> +			udelay(reset_udelay);
> +		}

Sorry for raising this only now, but I think I would have preferred to
see this reset-gpios handling be moved into a separate sub-function.
The loop initializing each PCIe interface is already quite large, and I
believe moving this reset-gpios thing to a sub-function would have made
sense.

But well, the patches have been applied, and we can always adjust this
with a followup patch.

Jason, have you re-created your for-next branch with all those patches?
I'd like to give them a test if possible.

Thanks!

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com