Subject: [PATCH 1/2] ARM: Dove: Add the audio devices in DT

From: [email-masked] (Jean-Francois Moine)
Date: Thu, 29 Aug 2013 12:07:04 +0200

On Wed, 28 Aug 2013 14:16:32 +0200
Sebastian Hesselbarth <[email-masked]> wrote:

	[snip]
> > Though, if the difference between the two units is the availability of
> > SPDIF support, then we shouldn't encode the channel number, but instead
> > the availability of SPDIF, i.e:
> >
> > 	audio0 {
> > 		reg = <... ...>;
> > 		compatible = "marvell,kirkwood-audio";
> > 		marvell,has-spdif;  
> 
> Agree, if you make it "marvell,has-spdif-in" and "marvell,has-spdif-out"
> Dove has either i2s-only or i2s+spdifo, kirkwood has i2s+spdifo+spdifi
> for the one audio controller available. Can't tell for Armada 370.
> 
> BTW, you might have followed some of the DT discussions with Mark
> before; as he insists on having a separate sound card node, he might
> argue that above property should be part of that node instead.

Yes. For the Cubox, the card will be described by something like:

	sound {
		compatible = "simple-audio";
		audio-controller = <&audio1>;
		audio-codec = <&spdif>;
		codec-dai-name = "dit-hifi";
	};

with:

	spdif: spdif {
 		compatible = "linux,spdif-dit";
	};

Then, the audio driver will know about s/pdif on the first open.

-- 
Ken ar c'henta?	|	      ** Breizh ha Linux atav! **
Jef		|		http://moinejf.free.fr/