Subject: [PATCH RESEND v5 1/2] PWM: PXA: add device tree support to PWM driver

From: [email-masked] (Thierry Reding)
Date: Tue, 8 Oct 2013 15:12:15 +0200

On Sat, Sep 21, 2013 at 12:19:33PM -0700, Mike Dunn wrote:
> This patch adds device tree support to the PXA's PWM driver.  Nothing
> needs to be extracted from the device tree node by the PWM device.
> Client devices need only specify the period; the per-chip index is
> implicitly zero because one device node must be present for each PWM
> output in use.  This approach is more convenient due to the wide
> variability in the number of PWM channels present across the various PXA
> variants, and is made possible by the fact that the register sets for
> each PWM channel are segregated from each other.  An of_xlate() method
> is added to parse this single-cell node.  The existing ID table is
> reused for the match table data.
> 
> Tested on a Palm Treo 680 (both platform data and DT cases).
> 
> Signed-off-by: Mike Dunn <[email-masked]>
> ---
>  Documentation/devicetree/bindings/pwm/pxa-pwm.txt | 30 +++++++++++++
>  drivers/pwm/pwm-pxa.c                             | 52 ++++++++++++++++++++++-
>  2 files changed, 81 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/pwm/pxa-pwm.txt

This looks good to me, but I'd like to get an Acked-by: from one of the
device tree bindings maintainers.

Thierry

> 
> diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
> new file mode 100644
> index 0000000..5ae9f1e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt
> @@ -0,0 +1,30 @@
> +Marvell PWM controller
> +
> +Required properties:
> +- compatible: should be one or more of:
> +  - "marvell,pxa250-pwm"
> +  - "marvell,pxa270-pwm"
> +  - "marvell,pxa168-pwm"
> +  - "marvell,pxa910-pwm"
> +- reg: Physical base address and length of the registers used by the PWM channel
> +  Note that one device instance must be created for each PWM that is used, so the
> +  length covers only the register window for one PWM output, not that of the
> +  entire PWM controller.  Currently length is 0x10 for all supported devices.
> +- #pwm-cells: Should be 1.  This cell is used to specify the period in
> +  nanoseconds.
> +
> +Example PWM device node:
> +
> +pwm0: pwm at 40b00000 {
> +	compatible = "marvell,pxa250-pwm";
> +	reg = <0x40b00000 0x10>;
> +	#pwm-cells = <1>;
> +};
> +
> +Example PWM client node:
> +
> +backlight {
> +	compatible = "pwm-backlight";
> +	pwms = <&pwm0 5000000>;
> +	...
> +}
> diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
> index a4d2164..e928cc8 100644
> --- a/drivers/pwm/pwm-pxa.c
> +++ b/drivers/pwm/pwm-pxa.c
> @@ -19,6 +19,7 @@
>  #include <linux/clk.h>
>  #include <linux/io.h>
>  #include <linux/pwm.h>
> +#include <linux/of_device.h>
>  
>  #include <asm/div64.h>
>  
> @@ -124,6 +125,45 @@ static struct pwm_ops pxa_pwm_ops = {
>  	.owner = THIS_MODULE,
>  };
>  
> +#ifdef CONFIG_OF
> +/*
> + * Device tree users must create one device instance for each pwm channel.
> + * Hence we dispense with the HAS_SECONDARY_PWM and "tell" the original driver
> + * code that this is a single channel pxa25x-pwm.  Currently all devices are
> + * supported identically.
> + */
> +static struct of_device_id pwm_of_match[] = {
> +	{ .compatible = "marvell,pxa250-pwm", .data = &pwm_id_table[0]},
> +	{ .compatible = "marvell,pxa270-pwm", .data = &pwm_id_table[0]},
> +	{ .compatible = "marvell,pxa168-pwm", .data = &pwm_id_table[0]},
> +	{ .compatible = "marvell,pxa910-pwm", .data = &pwm_id_table[0]},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, pwm_of_match);
> +#else
> +static struct of_device_id *pwm_of_match;
> +#endif
> +
> +static const struct platform_device_id *pxa_pwm_get_id_dt(struct device *dev)
> +{
> +	const struct of_device_id *id = of_match_device(pwm_of_match, dev);
> +	return id ? id->data : NULL;
> +}
> +
> +static struct pwm_device *
> +pxa_pwm_of_xlate(struct pwm_chip *pc, const struct of_phandle_args *args)
> +{
> +	struct pwm_device *pwm;
> +
> +	pwm = pwm_request_from_chip(pc, 0, NULL);
> +	if (IS_ERR(pwm))
> +		return pwm;
> +
> +	pwm_set_period(pwm, args->args[0]);
> +
> +	return pwm;
> +}
> +
>  static int pwm_probe(struct platform_device *pdev)
>  {
>  	const struct platform_device_id *id = platform_get_device_id(pdev);
> @@ -131,6 +171,12 @@ static int pwm_probe(struct platform_device *pdev)
>  	struct resource *r;
>  	int ret = 0;
>  
> +	if (IS_ENABLED(CONFIG_OF) && id == NULL)
> +		id = pxa_pwm_get_id_dt(&pdev->dev);
> +
> +	if (id == NULL)
> +		return -EINVAL;
> +
>  	pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL);
>  	if (pwm == NULL) {
>  		dev_err(&pdev->dev, "failed to allocate memory\n");
> @@ -145,7 +191,10 @@ static int pwm_probe(struct platform_device *pdev)
>  	pwm->chip.ops = &pxa_pwm_ops;
>  	pwm->chip.base = -1;
>  	pwm->chip.npwm = (id->driver_data & HAS_SECONDARY_PWM) ? 2 : 1;
> -
> +	if (IS_ENABLED(CONFIG_OF)) {
> +		pwm->chip.of_xlate = pxa_pwm_of_xlate;
> +		pwm->chip.of_pwm_n_cells = 1;
> +	}
>  	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	pwm->mmio_base = devm_ioremap_resource(&pdev->dev, r);
>  	if (IS_ERR(pwm->mmio_base))
> @@ -176,6 +225,7 @@ static struct platform_driver pwm_driver = {
>  	.driver		= {
>  		.name	= "pxa25x-pwm",
>  		.owner	= THIS_MODULE,
> +		.of_match_table	= of_match_ptr(pwm_of_match),
>  	},
>  	.probe		= pwm_probe,
>  	.remove		= pwm_remove,
> -- 
> 1.8.1.5
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20131008/cd5f6b92/attachment.sig>