Subject: [PATCH v2 10/27] mtd: nand: pxa3xx: Replace host->page_size by mtd->writesize

From: [email-masked] (Huang Shijie)
Date: Sun, 3 Nov 2013 17:52:13 -0500

On Fri, Oct 18, 2013 at 08:02:37PM -0300, Ezequiel Garcia wrote:
> There's no need to privately store the device page size as it's
> available in mtd structure field mtd->writesize.
> Also, this removes the hardcoded page size value, leaving the
> auto-detected value only.
> 
> Signed-off-by: Ezequiel Garcia <[email-masked]>
> ---
>  drivers/mtd/nand/pxa3xx_nand.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
> index fe2e27c..83ba036 100644
> --- a/drivers/mtd/nand/pxa3xx_nand.c
> +++ b/drivers/mtd/nand/pxa3xx_nand.c
> @@ -149,7 +149,6 @@ struct pxa3xx_nand_host {
>  	void			*info_data;
>  
>  	/* page size of attached chip */
> -	unsigned int		page_size;
>  	int			use_ecc;
>  	int			cs;
>  
> @@ -612,12 +611,12 @@ static int prepare_command_pool(struct pxa3xx_nand_info *info, int command,
>  			info->buf_start += mtd->writesize;
>  
>  		/* Second command setting for large pages */
> -		if (host->page_size >= PAGE_CHUNK_SIZE)
> +		if (mtd->writesize >= PAGE_CHUNK_SIZE)
>  			info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
>  
>  	case NAND_CMD_SEQIN:
>  		/* small page addr setting */
> -		if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) {
> +		if (unlikely(mtd->writesize < PAGE_CHUNK_SIZE)) {
>  			info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
>  					| (column & 0xFF);
>  
> @@ -891,7 +890,6 @@ static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info,
>  	}
>  
>  	/* calculate flash information */
> -	host->page_size = f->page_size;
you remove this line, but how the following code get the right value:?

	chip->ecc.size = host->page_size;
this line in the pxa3xx_nand_scan.

thanks
Huang Shijie