Subject: [PATCH 1/2] net: smc91x: Read hardware behavior flags from device tree

From: [email-masked] (Tony Lindgren)
Date: Wed, 11 Dec 2013 08:04:40 -0800

* Nishanth Menon <[email-masked]> [131211 02:23]:
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/smsc91x.txt
> @@ -0,0 +1,45 @@
> +* Smart Mixed-Signal Connectivity (SMSC) LAN91c94/91c111 Controller
> +
> +Required properties:
> +- compatible : Should be one of:
> +	"smsc,lan91c94"
> +	"smsc,lan91c111"
> +- reg : Address and length of the io space for SMSC LAN
> +- interrupts : Should contain SMSC LAN interrupt line
> +- interrupt-parent : Should be the phandle for the interrupt controller
> +  that services interrupts for this device
> +
> +Optional properties:
> +- reg-shift : Specify the quantity to shift the register offsets by
> +- reg-io-width : Specify the size (in bytes) of the IO accesses that
> +  should be performed on the device.  Valid value for SMSC LAN is
> +  1, 2 or 4.

I posted a minimal regression fix for this a few weeks ago that we
should merge to the v3.13-rc cycle:

http://www.spinics.net/lists/netdev/msg258913.html

Care to ack that one? Then if that works for you, maybe rebase these on
that one for the upcoming merge window?

Note that for the -rc cycle we don't need these extra properties as we
can get the interrupts from the struct resource after fix
4a43d686fe336c (of/irq: Pass trigger type in IRQ resource flags)
got merged.

Regards,

Tony