Subject: [PATCH V1 05/11] ARM: dts: imx6qdl-sabrelite: specify pad settings

From: [email-masked] (Marek Vasut)
Date: Fri, 13 Dec 2013 12:48:32 +0100

On Friday, December 13, 2013 at 02:49:09 AM, Troy Kisky wrote:
> Don't use 0x80000000 to get default pad settings.

What is the rationale behind this change please? Can you explain more in detail?

> Signed-off-by: Troy Kisky <[email-masked]>
> ---
>  arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index be899d3..b548647 100644
> --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
> @@ -114,13 +114,13 @@
>  	imx6q-sabrelite {
>  		pinctrl_hog: hoggrp {
>  			fsl,pins = <
> -/* uSDHC4 CD  */		MX6QDL_PAD_NANDF_D6__GPIO2_IO06	0x80000000
> -/* spi-nor CS */		MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x80000000
> -/* otg power en */		MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x80000000
> -/* ethernet phy reset */	MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x80000000
> -/* USDHC3 CD  */		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x80000000
> -/* USDHC3 WP  */		MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x1f0b0
> -/* SGTL5000 sys_mclk  */	MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x80000000
> +/* uSDHC4 CD  */		MX6QDL_PAD_NANDF_D6__GPIO2_IO06		
0x1b0b0
> +/* spi-nor CS */		MX6QDL_PAD_EIM_D19__GPIO3_IO19		
0x1b0b0
> +/* otg power en */		MX6QDL_PAD_EIM_D22__GPIO3_IO22		
0x1b0b0
> +/* ethernet phy reset */	MX6QDL_PAD_EIM_D23__GPIO3_IO23		
0x000b0
> +/* USDHC3 CD  */		MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		
0x1b0b0
> +/* USDHC3 WP  */		MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		
0x1f0b0
> +/* SGTL5000 sys_mclk  */	MX6QDL_PAD_GPIO_0__CCM_CLKO1		
0x000b0
>  			>;
>  		};

Best regards,
Marek Vasut