Subject: [PATCH] ARM: dts: imx6: add support for Ka-Ro TX6 modules

From: [email-masked] (Shawn Guo)
Date: Sat, 22 Mar 2014 16:23:53 +0800

On Wed, Mar 19, 2014 at 02:29:44PM +0100, Lothar Wa?mann wrote:
> This patch adds support for the Ka-Ro electronics GmbH TX6 modules.
> There are five distinct module types with either i.MX6Q or i.MX6DL and
> LVDS or LCD display interface and one DTS file for a complete system
> with an i.MX6DL based TX6 module and a baseboard mounted on the back
> of a display (imx6dl-tx6dl-comtft.dts).
> 
> Signed-off-by: Lothar Wa?mann <[email-masked]>
> ---
>  arch/arm/boot/dts/Makefile                |    6 +
>  arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts |  114 +++++
>  arch/arm/boot/dts/imx6dl-tx6u-801x.dts    |  188 ++++++++
>  arch/arm/boot/dts/imx6dl-tx6u-811x.dts    |  166 +++++++
>  arch/arm/boot/dts/imx6q-tx6q-1010.dts     |  192 +++++++++
>  arch/arm/boot/dts/imx6q-tx6q-1020.dts     |  192 +++++++++
>  arch/arm/boot/dts/imx6q-tx6q-1110.dts     |  174 ++++++++
>  arch/arm/boot/dts/imx6qdl-tx6.dtsi        |  672 +++++++++++++++++++++++++++++
>  8 files changed, 1704 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
>  create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-801x.dts
>  create mode 100644 arch/arm/boot/dts/imx6dl-tx6u-811x.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1010.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1020.dts
>  create mode 100644 arch/arm/boot/dts/imx6q-tx6q-1110.dts
>  create mode 100644 arch/arm/boot/dts/imx6qdl-tx6.dtsi
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index cf6c523..358684f 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -198,6 +198,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
>  	imx6dl-sabreauto.dtb \
>  	imx6dl-sabrelite.dtb \
>  	imx6dl-sabresd.dtb \
> +	imx6dl-tx6dl-comtft.dtb \
> +	imx6dl-tx6u-801x.dtb \
> +	imx6dl-tx6u-811x.dtb \
>  	imx6dl-wandboard.dtb \
>  	imx6q-arm2.dtb \
>  	imx6q-cm-fx6.dtb \
> @@ -218,6 +221,9 @@ dtb-$(CONFIG_ARCH_MXC) += \
>  	imx6q-sbc6x.dtb \
>  	imx6q-udoo.dtb \
>  	imx6q-wandboard.dtb \
> +	imx6q-tx6q-1010.dtb \
> +	imx6q-tx6q-1020.dtb \
> +	imx6q-tx6q-1110.dtb \
>  	imx6sl-evk.dtb \
>  	vf610-cosmic.dtb \
>  	vf610-twr.dtb
> diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
> new file mode 100644
> index 0000000..6df5a25
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
> @@ -0,0 +1,114 @@
> +/*
> + * Copyright 2014 Lothar Wa?mann <[email-masked]>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> +	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
> +	compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl";

Shouldn't it be "karo,imx6dl-tx6dl" instead?

> +
> +	aliases {
> +		display = &display;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm2 0 500000 0>;
> +		power-supply = <&reg_3v3>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	display: display at di0 {
> +		compatible = "fsl,imx-parallel-display";
> +		interface-pix-fmt = "rgb24";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_disp0_1>;
> +		status = "okay";
> +
> +		port {
> +			display0_in: endpoint {
> +				remote-endpoint = <&ipu1_di0_disp0>;
> +			};
> +		};

I do not have OF graph stuff in my tree yet.

> +
> +		display-timings {
> +			native-mode = <&ET070001DM6>;
> +
> +			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
> +				clock-frequency = <33264000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <88>;
> +				hsync-len = <128>;
> +				hfront-porch = <40>;
> +				vback-porch = <33>;
> +				vsync-len = <2>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +		};
> +        };
> +
> +	panel {
> +		compatible = "simple-panel";
> +		power-supply = <&reg_lcd1_pwr>;
> +		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> +		backlight = <&backlight>;
> +	};
> +};
> +
> +&can1 {
> +	status = "disabled";
> +};
> +
> +&can2 {
> +	xceiver-supply = <&reg_3v3>;
> +};
> +
> +&ipu1_di0_disp0 {
> +	remote-endpoint = <&display0_in>;
> +};
> +
> +&kpp {
> +	status = "disabled";
> +};
> +
> +&reg_can_xcvr {
> +	status = "disabled";
> +};
> +
> +&reg_lcd1_pwr {
> +	status = "okay";
> +};
> +
> +&touchscreen {
> +	status = "disabled";
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
> new file mode 100644
> index 0000000..25413f69
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
> @@ -0,0 +1,188 @@
> +/*
> + * Copyright 2014 Lothar Wa?mann <[email-masked]>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> +	model = "Ka-Ro electronics TX6U-801x Module";
> +	compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl";
> +
> +	aliases {
> +		display = &display;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> +		power-supply = <&reg_3v3>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	display: display at di0 {
> +		compatible = "fsl,imx-parallel-display";
> +		interface-pix-fmt = "rgb24";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_disp0_1>;
> +		status = "okay";
> +
> +		port {
> +			display0_in: endpoint {
> +				remote-endpoint = <&ipu1_di0_disp0>;
> +			};
> +		};
> +
> +		display-timings {
> +			VGA {
> +				clock-frequency = <25200000>;
> +				hactive = <640>;
> +				vactive = <480>;
> +				hback-porch = <48>;
> +				hsync-len = <96>;
> +				hfront-porch = <16>;
> +				vback-porch = <31>;
> +				vsync-len = <2>;
> +				vfront-porch = <12>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ETV570 {
> +				clock-frequency = <25200000>;
> +				hactive = <640>;
> +				vactive = <480>;
> +				hback-porch = <114>;
> +				hsync-len = <30>;
> +				hfront-porch = <16>;
> +				vback-porch = <32>;
> +				vsync-len = <3>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0350 {
> +				clock-frequency = <6413760>;
> +				hactive = <320>;
> +				vactive = <240>;
> +				hback-porch = <34>;
> +				hsync-len = <34>;
> +				hfront-porch = <20>;
> +				vback-porch = <15>;
> +				vsync-len = <3>;
> +				vfront-porch = <4>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0430 {
> +				clock-frequency = <9009000>;
> +				hactive = <480>;
> +				vactive = <272>;
> +				hback-porch = <2>;
> +				hsync-len = <41>;
> +				hfront-porch = <2>;
> +				vback-porch = <2>;
> +				vsync-len = <10>;
> +				vfront-porch = <2>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +
> +			ET0500 {
> +				clock-frequency = <33264000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <88>;
> +				hsync-len = <128>;
> +				hfront-porch = <40>;
> +				vback-porch = <33>;
> +				vsync-len = <2>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0700 { /* same as ET0500 */
> +				clock-frequency = <33264000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <88>;
> +				hsync-len = <128>;
> +				hfront-porch = <40>;
> +				vback-porch = <33>;
> +				vsync-len = <2>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ETQ570 {
> +				clock-frequency = <6596040>;
> +				hactive = <320>;
> +				vactive = <240>;
> +				hback-porch = <38>;
> +				hsync-len = <30>;
> +				hfront-porch = <30>;
> +				vback-porch = <16>;
> +				vsync-len = <3>;
> +				vfront-porch = <4>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +        };
> +
> +	panel {
> +		compatible = "simple-panel";
> +		power-supply = <&reg_lcd1_pwr>;
> +		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> +		backlight = <&backlight>;
> +	};
> +};
> +
> +&ipu1_di0_disp0 {
> +	remote-endpoint = <&display0_in>;
> +};
> +
> +&reg_lcd1_pwr {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> new file mode 100644
> index 0000000..c97fb42
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
> @@ -0,0 +1,166 @@
> +/*
> + * Copyright 2014 Lothar Wa?mann <[email-masked]>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6dl.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> +	model = "Ka-Ro electronics TX6U-811x Module";
> +	compatible = "fsl,imx6dl-tx6dl", "fsl,imx6dl";
> +
> +	aliases {
> +		display = &lvds0;
> +		lvds0 = &lvds0;
> +		lvds1 = &lvds1;
> +	};
> +
> +	backlight0: backlight0 {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm2 0 500000 0>;
> +		power-supply = <&reg_lcd0_pwr>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	backlight1: backlight1 {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 500000 0>;
> +		power-supply = <&reg_lcd1_pwr>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	panel0 {

The convention of device tree node is node-name at unit-address, so in this
case it should probably be panel at 0.

> +		compatible = "simple-panel";
> +		power-supply = <&reg_3v3>;
> +		backlight = <&backlight0>;
> +	};
> +
> +	panel1 {
> +		compatible = "simple-panel";
> +		power-supply = <&reg_3v3>;
> +		backlight = <&backlight1>;
> +	};
> +};
> +
> +&i2c3 {
> +	polytouch2: eeti at 04 {
> +		compatible = "eeti,egalax_ts";
> +		reg = <0x04>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_eeti>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <22 0>;
> +		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +		linux,wakeup;
> +	};
> +};
> +
> +&iomuxc {
> +	imx6dl-tx6u-811x {
> +		pinctrl_eeti: eetigrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
> +			>;
> +		};
> +	};
> +};
> +
> +&kpp {
> +	status = "disabled"; /* clashes with backlight1 PWM */
> +};
> +
> +&ldb {
> +	status = "okay";
> +
> +	lvds0: lvds-channel at 0 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <18>;
> +		status = "okay";
> +
> +		display-timings {
> +			native-mode = <&lvds_timing0>;
> +			lvds_timing0: hsd100pxn1 {
> +				clock-frequency = <65000000>;
> +				hactive = <1024>;
> +				vactive = <768>;
> +				hback-porch = <220>;
> +				hfront-porch = <40>;
> +				vback-porch = <21>;
> +				vfront-porch = <7>;
> +				hsync-len = <60>;
> +				vsync-len = <10>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +		};
> +	};
> +
> +	lvds1: lvds-channel at 1 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <18>;
> +		status = "okay";
> +
> +		display-timings {
> +			native-mode = <&lvds_timing1>;
> +			lvds_timing1: hsd100pxn1 {
> +				clock-frequency = <65000000>;
> +				hactive = <1024>;
> +				vactive = <768>;
> +				hback-porch = <220>;
> +				hfront-porch = <40>;
> +				vback-porch = <21>;
> +				vfront-porch = <7>;
> +				hsync-len = <60>;
> +				vsync-len = <10>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +		};
> +	};
> +};
> +
> +&reg_lcd0_pwr {
> +	status = "okay";
> +};
> +
> +&reg_lcd1_pwr {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
> new file mode 100644
> index 0000000..6a37c73
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
> @@ -0,0 +1,192 @@
> +/*
> + * Copyright 2014 Lothar Wa?mann <[email-masked]>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> +	model = "Ka-Ro electronics TX6Q-1010 Module";
> +	compatible = "fsl,imx6q-tx6q", "fsl,imx6q";
> +
> +	aliases {
> +		display = &display;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> +		power-supply = <&reg_3v3>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	display: display at di0 {
> +		compatible = "fsl,imx-parallel-display";
> +		interface-pix-fmt = "rgb24";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_disp0_1>;
> +		status = "okay";
> +
> +		port {
> +			display0_in: endpoint {
> +				remote-endpoint = <&ipu1_di0_disp0>;
> +			};
> +		};
> +
> +		display-timings {
> +			VGA {
> +				clock-frequency = <25200000>;
> +				hactive = <640>;
> +				vactive = <480>;
> +				hback-porch = <48>;
> +				hsync-len = <96>;
> +				hfront-porch = <16>;
> +				vback-porch = <31>;
> +				vsync-len = <2>;
> +				vfront-porch = <12>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ETV570 {
> +				clock-frequency = <25200000>;
> +				hactive = <640>;
> +				vactive = <480>;
> +				hback-porch = <114>;
> +				hsync-len = <30>;
> +				hfront-porch = <16>;
> +				vback-porch = <32>;
> +				vsync-len = <3>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0350 {
> +				clock-frequency = <6413760>;
> +				hactive = <320>;
> +				vactive = <240>;
> +				hback-porch = <34>;
> +				hsync-len = <34>;
> +				hfront-porch = <20>;
> +				vback-porch = <15>;
> +				vsync-len = <3>;
> +				vfront-porch = <4>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0430 {
> +				clock-frequency = <9009000>;
> +				hactive = <480>;
> +				vactive = <272>;
> +				hback-porch = <2>;
> +				hsync-len = <41>;
> +				hfront-porch = <2>;
> +				vback-porch = <2>;
> +				vsync-len = <10>;
> +				vfront-porch = <2>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +
> +			ET0500 {
> +				clock-frequency = <33264000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <88>;
> +				hsync-len = <128>;
> +				hfront-porch = <40>;
> +				vback-porch = <33>;
> +				vsync-len = <2>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0700 { /* same as ET0500 */
> +				clock-frequency = <33264000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <88>;
> +				hsync-len = <128>;
> +				hfront-porch = <40>;
> +				vback-porch = <33>;
> +				vsync-len = <2>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ETQ570 {
> +				clock-frequency = <6596040>;
> +				hactive = <320>;
> +				vactive = <240>;
> +				hback-porch = <38>;
> +				hsync-len = <30>;
> +				hfront-porch = <30>;
> +				vback-porch = <16>;
> +				vsync-len = <3>;
> +				vfront-porch = <4>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +        };
> +
> +	panel {
> +		compatible = "simple-panel";
> +		power-supply = <&reg_lcd1_pwr>;
> +		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> +		backlight = <&backlight>;
> +	};
> +};
> +
> +&ipu1_di0_disp0 {
> +	remote-endpoint = <&display0_in>;
> +};
> +
> +&ipu2 {
> +	status = "disabled";
> +};
> +
> +&reg_lcd1_pwr {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
> new file mode 100644
> index 0000000..9fc71b4
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
> @@ -0,0 +1,192 @@
> +/*
> + * Copyright 2014 Lothar Wa?mann <[email-masked]>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> +	model = "Ka-Ro electronics TX6Q-1020 Module";
> +	compatible = "fsl,imx6q-tx6q", "fsl,imx6q";
> +
> +	aliases {
> +		display = &display;
> +	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
> +		power-supply = <&reg_3v3>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	display: display at di0 {
> +		compatible = "fsl,imx-parallel-display";
> +		interface-pix-fmt = "rgb24";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_disp0_1>;
> +		status = "okay";
> +
> +		port {
> +			display0_in: endpoint {
> +				remote-endpoint = <&ipu1_di0_disp0>;
> +			};
> +		};
> +
> +		display-timings {
> +			VGA {
> +				clock-frequency = <25200000>;
> +				hactive = <640>;
> +				vactive = <480>;
> +				hback-porch = <48>;
> +				hsync-len = <96>;
> +				hfront-porch = <16>;
> +				vback-porch = <31>;
> +				vsync-len = <2>;
> +				vfront-porch = <12>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ETV570 {
> +				clock-frequency = <25200000>;
> +				hactive = <640>;
> +				vactive = <480>;
> +				hback-porch = <114>;
> +				hsync-len = <30>;
> +				hfront-porch = <16>;
> +				vback-porch = <32>;
> +				vsync-len = <3>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0350 {
> +				clock-frequency = <6413760>;
> +				hactive = <320>;
> +				vactive = <240>;
> +				hback-porch = <34>;
> +				hsync-len = <34>;
> +				hfront-porch = <20>;
> +				vback-porch = <15>;
> +				vsync-len = <3>;
> +				vfront-porch = <4>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0430 {
> +				clock-frequency = <9009000>;
> +				hactive = <480>;
> +				vactive = <272>;
> +				hback-porch = <2>;
> +				hsync-len = <41>;
> +				hfront-porch = <2>;
> +				vback-porch = <2>;
> +				vsync-len = <10>;
> +				vfront-porch = <2>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +
> +			ET0500 {
> +				clock-frequency = <33264000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <88>;
> +				hsync-len = <128>;
> +				hfront-porch = <40>;
> +				vback-porch = <33>;
> +				vsync-len = <2>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ET0700 { /* same as ET0500 */
> +				clock-frequency = <33264000>;
> +				hactive = <800>;
> +				vactive = <480>;
> +				hback-porch = <88>;
> +				hsync-len = <128>;
> +				hfront-porch = <40>;
> +				vback-porch = <33>;
> +				vsync-len = <2>;
> +				vfront-porch = <10>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +
> +			ETQ570 {
> +				clock-frequency = <6596040>;
> +				hactive = <320>;
> +				vactive = <240>;
> +				hback-porch = <38>;
> +				hsync-len = <30>;
> +				hfront-porch = <30>;
> +				vback-porch = <16>;
> +				vsync-len = <3>;
> +				vfront-porch = <4>;
> +				hsync-active = <0>;
> +				vsync-active = <0>;
> +				de-active = <1>;
> +				pixelclk-active = <0>;
> +			};
> +		};
> +        };
> +
> +	panel {
> +		compatible = "simple-panel";
> +		power-supply = <&reg_lcd1_pwr>;
> +		enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> +		backlight = <&backlight>;
> +	};
> +};
> +
> +&gpmi {
> +	status = "disabled";
> +};
> +
> +&ipu1_di0_disp0 {
> +	remote-endpoint = <&display0_in>;
> +};
> +
> +&reg_lcd1_pwr {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
> new file mode 100644
> index 0000000..60b2e0e
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
> @@ -0,0 +1,174 @@
> +/*
> + * Copyright 2014 Lothar Wa?mann <[email-masked]>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +#include "imx6q.dtsi"
> +#include "imx6qdl-tx6.dtsi"
> +
> +/ {
> +	model = "Ka-Ro electronics TX6Q-1110 Module";
> +	compatible = "fsl,imx6q-tx6q", "fsl,imx6q";
> +
> +	aliases {
> +		display = &lvds0;
> +		lvds0 = &lvds0;
> +		lvds1 = &lvds1;
> +	};
> +
> +	backlight0: backlight0 {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm2 0 500000 0>;
> +		power-supply = <&reg_lcd0_pwr>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	backlight1: backlight1 {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 500000 0>;
> +		power-supply = <&reg_lcd1_pwr>;
> +		/*
> +		 * a poor man's way to create a 1:1 relationship between
> +		 * the PWM value and the actual duty cycle
> +		 */
> +		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
> +				     10 11 12 13 14 15 16 17 18 19
> +				     20 21 22 23 24 25 26 27 28 29
> +				     30 31 32 33 34 35 36 37 38 39
> +				     40 41 42 43 44 45 46 47 48 49
> +				     50 51 52 53 54 55 56 57 58 59
> +				     60 61 62 63 64 65 66 67 68 69
> +				     70 71 72 73 74 75 76 77 78 79
> +				     80 81 82 83 84 85 86 87 88 89
> +				     90 91 92 93 94 95 96 97 98 99
> +				    100>;
> +		default-brightness-level = <50>;
> +	};
> +
> +	panel0 {
> +		compatible = "simple-panel";
> +		power-supply = <&reg_3v3>;
> +		backlight = <&backlight0>;
> +	};
> +
> +	panel1 {
> +		compatible = "simple-panel";
> +		power-supply = <&reg_3v3>;
> +		backlight = <&backlight1>;
> +	};
> +};
> +
> +&i2c3 {
> +	polytouch2: eeti at 04 {
> +		compatible = "eeti,egalax_ts";
> +		reg = <0x04>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_eeti>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <22 0>;
> +		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +		linux,wakeup;
> +	};
> +};
> +
> +&iomuxc {
> +	imx6q-tx6q-1110 {
> +		pinctrl_eeti: eetigrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
> +			>;
> +		};
> +	};
> +};
> +
> +&ipu2 {
> +	status = "disabled";
> +};
> +
> +&kpp {
> +	status = "disabled"; /* clashes with backlight1 PWM */
> +};
> +
> +&ldb {
> +	status = "okay";
> +
> +	lvds0: lvds-channel at 0 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <18>;
> +		status = "okay";
> +
> +		display-timings {
> +			native-mode = <&lvds_timing0>;
> +			lvds_timing0: hsd100pxn1 {
> +				clock-frequency = <65000000>;
> +				hactive = <1024>;
> +				vactive = <768>;
> +				hback-porch = <220>;
> +				hfront-porch = <40>;
> +				vback-porch = <21>;
> +				vfront-porch = <7>;
> +				hsync-len = <60>;
> +				vsync-len = <10>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +		};
> +	};
> +
> +	lvds1: lvds-channel at 1 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <18>;
> +		status = "okay";
> +
> +		display-timings {
> +			native-mode = <&lvds_timing1>;
> +			lvds_timing1: hsd100pxn1 {
> +				clock-frequency = <65000000>;
> +				hactive = <1024>;
> +				vactive = <768>;
> +				hback-porch = <220>;
> +				hfront-porch = <40>;
> +				vback-porch = <21>;
> +				vfront-porch = <7>;
> +				hsync-len = <60>;
> +				vsync-len = <10>;
> +				de-active = <1>;
> +				pixelclk-active = <1>;
> +			};
> +		};
> +	};
> +};
> +
> +&reg_lcd0_pwr {
> +	status = "okay";
> +};
> +
> +&reg_lcd1_pwr {
> +	status = "okay";
> +};
> +
> +&sata {
> +	status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> new file mode 100644
> index 0000000..828e7f3
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
> @@ -0,0 +1,672 @@
> +/*
> + * Copyright 2014 Lothar Wa?mann <[email-masked]>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	aliases {
> +		can0 = &can2;
> +		can1 = &can1;
> +		ethernet0 = &fec;
> +		lcdif_23bit_pins_a = &pinctrl_disp0_1;
> +		lcdif_24bit_pins_a = &pinctrl_disp0_2;
> +		pwm0 = &pwm1;
> +		pwm1 = &pwm2;
> +		reg_can_xcvr = &reg_can_xcvr;
> +		stk5led = &user_led;
> +		usbotg = &usbotg;
> +		sdhc0 = &usdhc1;
> +		sdhc1 = &usdhc2;
> +	};
> +
> +	memory {
> +		reg = <0 0>; /* will be filled by U-Boot */
> +	};
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		mclk: codec_clock {

clock at 0

> +			compatible = "fixed-clock";
> +			reg = <0>;
> +			#clock-cells = <0>;
> +			clock-frequency = <27000000>;
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		power {
> +			label = "Power Button";
> +			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
> +			linux,code = <KEY_POWER>;
> +			gpio-key,wakeup;
> +		};
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		user_led: user {
> +			label = "Heartbeat";
> +			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "heartbeat";
> +		};
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		reg_3v3_etn: regulator at 0 {
> +			compatible = "regulator-fixed";
> +			reg = <0>;
> +			regulator-name = "3V3_ETN";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_etnphy_power>;
> +			gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +
> +		reg_2v5: regulator at 1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "2V5";
> +			regulator-min-microvolt = <2500000>;
> +			regulator-max-microvolt = <2500000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_3v3: regulator at 2 {
> +			compatible = "regulator-fixed";
> +			reg = <2>;
> +			regulator-name = "3V3";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-always-on;
> +		};
> +
> +		reg_can_xcvr: regulator at 3 {
> +			compatible = "regulator-fixed";
> +			reg = <3>;
> +			regulator-name = "CAN XCVR";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_flexcan_xcvr>;
> +			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
> +			enable-active-low;
> +		};
> +
> +		reg_lcd0_pwr: regulator at 4 {
> +			compatible = "regulator-fixed";
> +			reg = <4>;
> +			regulator-name = "LCD0 POWER";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_lcd0_pwr>;
> +			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +			status = "disabled";
> +		};
> +
> +		reg_lcd1_pwr: regulator at 5 {
> +			compatible = "regulator-fixed";
> +			reg = <5>;
> +			regulator-name = "LCD1 POWER";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_lcd1_pwr>;
> +			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +			status = "disabled";
> +		};
> +#if 0
> +		reg_lcd_reset: regulator at 6 {
> +			compatible = "regulator-fixed";
> +			reg = <6>;
> +			regulator-name = "LCD RESET";
> +			regulator-min-microvolt = <3300000>;
> +			regulator-max-microvolt = <3300000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_lcd_reset>;
> +			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
> +			startup-delay-us = <300000>;
> +			enable-active-high;
> +			regulator-always-on;
> +			status = "disabled";
> +		};
> +#endif
> +		reg_usbh1_vbus: regulator at 7 {
> +			compatible = "regulator-fixed";
> +			reg = <7>;
> +			regulator-name = "usbh1_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usbh1_vbus>;
> +			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +
> +		reg_usbotg_vbus: regulator at 8 {
> +			compatible = "regulator-fixed";
> +			reg = <8>;
> +			regulator-name = "usbotg_vbus";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&pinctrl_usbotg_vbus>;
> +			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> +			enable-active-high;
> +		};
> +	};
> +
> +	sound {
> +		compatible = "fsl,imx6qdl-tx6qdl-sgtl5000",
> +			     "fsl,imx-audio-sgtl5000";
> +		model = "sgtl5000-audio";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_audmux>;
> +		ssi-controller = <&ssi1>;
> +		audio-codec = <&sgtl5000>;
> +		audio-routing =
> +			"MIC_IN", "Mic Jack",
> +			"Mic Jack", "Mic Bias",
> +			"Headphone Jack", "HP_OUT";
> +		mux-int-port = <1>;
> +		mux-ext-port = <5>;
> +	};
> +};
> +
> +&audmux {
> +	status = "okay";
> +};
> +
> +&can1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan1>;
> +	xceiver-supply = <&reg_can_xcvr>;
> +

Drop the new line.

> +	status = "okay";
> +};
> +
> +&can2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_flexcan2>;
> +	xceiver-supply = <&reg_can_xcvr>;
> +
> +	status = "okay";
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-mode = "rmii";
> +	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
> +	phy-supply = <&reg_3v3_etn>;
> +	status = "okay";
> +};
> +
> +&gpmi {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_gpmi_nand>;
> +	nand-on-flash-bbt;
> +	fsl,no-blockmark-swap;
> +	status = "okay";
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +
> +	ds1339: rtc at 68 {
> +		compatible = "dallas,ds1339";
> +		reg = <0x68>;
> +	};
> +};
> +
> +&i2c3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c3>;
> +	clock-frequency = <400000>;
> +	status = "okay";
> +
> +	sgtl5000: sgtl5000 at 0a {
> +		compatible = "fsl,sgtl5000";
> +		reg = <0x0a>;
> +		VDDA-supply = <&reg_2v5>;
> +		VDDIO-supply = <&reg_3v3>;
> +		clocks = <&mclk>;
> +	};
> +
> +	polytouch: edt-ft5x06 at 38 {
> +		compatible = "edt,edt-ft5x06";
> +		reg = <0x38>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_edt_ft5x06>;
> +		interrupt-parent = <&gpio6>;
> +		interrupts = <15 0>;
> +		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
> +		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;

Where are all these bindings documented?

> +		linux,wakeup;
> +	};
> +
> +	touchscreen: tsc2007 at 48 {
> +		compatible = "ti,tsc2007";
> +		reg = <0x48>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_tsc2007>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <26 0>;
> +		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
> +		ti,x-plate-ohms = <660>;
> +		linux,wakeup;
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_hog>;
> +
> +	imx6qdl-tx6 {
> +		pinctrl_hog: hoggrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* LED */
> +				MX6QDL_PAD_SD3_DAT2__GPIO7_IO06		0x1b0b1 /* ETN PHY RESET */
> +				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b1 /* ETN PHY INT

Broken comment?

> +				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1 /* PWR BTN */
> +			>;
> +		};
> +
> +		pinctrl_audmux: audmuxgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_ROW1__AUD5_RXD		0x130b0 /* SSI1_RXD */
> +				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0 /* SSI1_TXD */
> +				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0 /* SSI1_CLK */
> +				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0 /* SSI1_FS */
> +			>;
> +		};
> +
> +		pinctrl_disp0_1: disp0grp-1 {
> +			fsl,pins = <
> +				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
> +				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
> +				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
> +				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
> +				/* PAD DISP0_DAT0 is used for the Flexcan transceiver control */
> +				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
> +				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
> +				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
> +				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
> +				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
> +				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
> +				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
> +				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
> +				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
> +				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
> +				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
> +				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
> +				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
> +				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
> +				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
> +				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
> +				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
> +				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
> +				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
> +				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
> +				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
> +				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
> +				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
> +			>;
> +		};
> +
> +		pinctrl_disp0_2: disp0grp-2 {
> +			fsl,pins = <
> +				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
> +				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
> +				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
> +				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
> +				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
> +				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
> +				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
> +				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
> +				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
> +				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
> +				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
> +				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
> +				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
> +				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
> +				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
> +				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
> +				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
> +				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
> +				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
> +				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
> +				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
> +				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
> +				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
> +				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
> +				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
> +				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
> +				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
> +				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
> +			>;
> +		};
> +
> +		pinctrl_edt_ft5x06: edt-ft5x06grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0 /* Interrupt */
> +				MX6QDL_PAD_EIM_A16__GPIO2_IO22  	0x1b0b0 /* Reset */
> +				MX6QDL_PAD_EIM_A17__GPIO2_IO21  	0x1b0b0 /* Wake */
> +			>;
> +		};
> +
> +		pinctrl_enet: enetgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
> +				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
> +				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
> +				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
> +				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
> +				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
> +				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
> +				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
> +				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
> +			>;
> +		};
> +
> +		pinctrl_etnphy_power: etnphy-pwrgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1 /* ETN PHY POWER */
> +			>;
> +		};
> +
> +		pinctrl_flexcan1: flexcan1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
> +				MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
> +			>;
> +		};
> +
> +		pinctrl_flexcan2: flexcan2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
> +				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
> +			>;
> +		};
> +
> +		pinctrl_flexcan_xcvr: flexcan-xcvrgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b0 /* Flexcan XCVR enable */
> +			>;
> +		};
> +
> +		pinctrl_gpmi_nand: gpmi-nand {

gpminandgrp

> +			fsl,pins = <
> +				MX6QDL_PAD_NANDF_CLE__NAND_CLE    	0x0b0b1
> +				MX6QDL_PAD_NANDF_ALE__NAND_ALE    	0x0b0b1
> +				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B  	0x0b0b1
> +				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
> +				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B  	0x0b0b1
> +				MX6QDL_PAD_SD4_CMD__NAND_RE_B     	0x0b0b1
> +				MX6QDL_PAD_SD4_CLK__NAND_WE_B     	0x0b0b1
> +				MX6QDL_PAD_NANDF_D0__NAND_DATA00  	0x0b0b1
> +				MX6QDL_PAD_NANDF_D1__NAND_DATA01  	0x0b0b1
> +				MX6QDL_PAD_NANDF_D2__NAND_DATA02  	0x0b0b1
> +				MX6QDL_PAD_NANDF_D3__NAND_DATA03  	0x0b0b1
> +				MX6QDL_PAD_NANDF_D4__NAND_DATA04  	0x0b0b1
> +				MX6QDL_PAD_NANDF_D5__NAND_DATA05  	0x0b0b1
> +				MX6QDL_PAD_NANDF_D6__NAND_DATA06  	0x0b0b1
> +				MX6QDL_PAD_NANDF_D7__NAND_DATA07  	0x0b0b1
> +			>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
> +				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c3: i2c3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
> +				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_kpp: kppgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_9__KEY_COL6		0x1b0b1
> +				MX6QDL_PAD_GPIO_4__KEY_COL7		0x1b0b1
> +				MX6QDL_PAD_KEY_COL2__KEY_COL2		0x1b0b1
> +				MX6QDL_PAD_KEY_COL3__KEY_COL3		0x1b0b1
> +

Drop it.

> +				MX6QDL_PAD_GPIO_2__KEY_ROW6		0x1b0b1
> +				MX6QDL_PAD_GPIO_5__KEY_ROW7		0x1b0b1
> +				MX6QDL_PAD_KEY_ROW2__KEY_ROW2		0x1b0b1
> +				MX6QDL_PAD_KEY_ROW3__KEY_ROW3		0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_lcd0_pwr: lcd0-pwrgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1 /* LCD Reset */
> +			>;
> +		};
> +
> +		pinctrl_lcd1_pwr: lcd1-pwrgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b1 /* LCD Power Enable */
> +			>;
> +		};
> +
> +		pinctrl_pwm1: pwm1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_pwm2: pwm2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_tsc2007: tsc2007grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0 /* Interrupt */
> +			>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
> +				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart1_rtscts: uart1_rtsctsgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_DAT1__UART1_RTS_B	0x1b0b1
> +				MX6QDL_PAD_SD3_DAT0__UART1_CTS_B	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
> +				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart2_rtscts: uart2_rtsctsgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
> +				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart3: uart3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
> +				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_uart3_rtscts: uart3_rtsctsgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_DAT3__UART3_CTS_B	0x1b0b1
> +				MX6QDL_PAD_SD3_RST__UART3_RTS_B		0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_usbh1_vbus: usbh1-vbusgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0 /* USBH1_VBUSEN */
> +			>;
> +		};
> +
> +		pinctrl_usbotg: usbotggrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x17059
> +			>;
> +		};
> +
> +		pinctrl_usbotg_vbus: usbotg-vbusgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* USBOTG_VBUSEN */
> +			>;
> +		};
> +
> +		pinctrl_usdhc1: usdhc1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x0b0b1
> +				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x0b0b1
> +				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x0b0b1
> +				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x0b0b1
> +				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x0b0b1
> +				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x0b0b1
> +				MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x1b0b0 /* SD1 CD */
> +			>;
> +		};
> +
> +		pinctrl_usdhc2: usdhc2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x0b0b1
> +				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x0b0b1
> +				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x0b0b1
> +				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x0b0b1
> +				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x0b0b1
> +				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x0b0b1
> +				MX6QDL_PAD_SD3_CLK__GPIO7_IO03		0x1b0b0 /* SD2 CD */
> +			>;
> +		};
> +	};
> +};
> +
> +&kpp {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_kpp>;
> +	/* sample keymap */
> +	/* row/col 0,1 are mapped to KPP row/col 6,7 */
> +	linux,keymap = <
> +		MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */
> +		MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */
> +		MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */
> +		MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */
> +		MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */
> +		MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */
> +		MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */
> +		MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */
> +		MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */
> +		MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */
> +		MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */
> +	>;
> +};
> +
> +&pwm1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm1>;
> +	#pwm-cells = <3>;
> +	status = "disabled";
> +};
> +
> +&pwm2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm2>;
> +	#pwm-cells = <3>;
> +	status = "okay";
> +};
> +
> +&ssi1 {
> +	fsl,mode = "i2s-slave";
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>;

These two entries can be merged into one.

Shawn

> +	status = "okay";
> +};
> +
> +&uart3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
> +	status = "okay";
> +};
> +
> +&usbh1 {
> +	vbus-supply = <&reg_usbh1_vbus>;
> +	dr_mode = "host";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usbotg {
> +	vbus-supply = <&reg_usbotg_vbus>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usbotg>;
> +	dr_mode = "peripheral";
> +	disable-over-current;
> +	status = "okay";
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	cd-gpios = <&gpio7 2 0>;
> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	cd-gpios = <&gpio7 3 0>;
> +	status = "okay";
> +};
> -- 
> 1.7.10.4
> 
> 
>