Subject: [PATCH 1/4] mfd: twl4030-power: Add recommended idle configuration

From: [email-masked] (Lee Jones)
Date: Mon, 28 Apr 2014 12:41:33 +0100

> These settings are based on the "Recommended Sleep Sequences for
> the Zoom Platform" pdf at:
> 
> http://omappedia.com/wiki/File:Recommended_Sleep_Sequences_Zoom.pdf
> 
> These settings assume most of the regulators are under control of
> Linux, and cuts off VDD1 and VDD2 during off-idle as Linux cannot
> do it.

Linux does it becuase Linux can't do it. Eh?

> For any board specific changes to these, let's patch them in as
> changes to the generic data in the follow-up patches. This keeps
> the board specific changes small.
> 
> Note that this does not consider the twl5030 errata 27. That
> can be added later on after it has been tested.
> 
> Cc: Peter De Schrijver <[email-masked]>
> Cc: Samuel Ortiz <[email-masked]>
> Cc: Lee Jones <[email-masked]>
> Signed-off-by: Tony Lindgren <[email-masked]>
> ---
>  .../devicetree/bindings/mfd/twl4030-power.txt      |   4 +
>  drivers/mfd/twl4030-power.c                        | 165 +++++++++++++++++++++

driver/mfd changes look good to me:
  Acked-by: Lee Jones <[email-masked]>

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org ? Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog