Subject: [PATCH 19/22] ARM: sunxi: Add earlyprintk support using R_UART (sun6i/sun8i)

From: [email-masked] (Maxime Ripard)
Date: Sun, 25 May 2014 20:46:37 +0200

Hi,

On Fri, May 23, 2014 at 03:51:22PM +0800, Chen-Yu Tsai wrote:
> sun6i/sun8i have a UART in the RTC block group, which can be used
> as an early console. This is most useful on sun8i as UART0 is muxed
> with MMC0, which is not available if we boot from MMC.
> 
> Signed-off-by: Chen-Yu Tsai <[email-masked]>
> ---
>  arch/arm/Kconfig.debug | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index eab8ecb..9e22708 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -694,6 +694,14 @@ choice
>  		  Say Y here if you want kernel low-level debugging support
>  		  on Allwinner A1X based platforms on the UART1.
>  
> +	config DEBUG_SUNXI_R_UART
> +		bool "Kernel low-level debugging messages via sunXi R_UART"
> +		depends on ARCH_SUNXI

It should rather depend on MACH_SUN8I.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140525/2e024dd9/attachment.sig>