Subject: [PATCH 13/22] clk: sunxi: Add A23 clocks support

From: [email-masked] (Maxime Ripard)
Date: Sun, 25 May 2014 21:05:37 +0200

On Fri, May 23, 2014 at 03:51:16PM +0800, Chen-Yu Tsai wrote:
> The clock control unit on the A23 is similar to the one found on the A31.
> 
> The AHB1, APB1, APB2 gates on the A23 are almost identical to the ones
> on the A31, but some outputs are missing.
> 
> The main CPU PLL (PLL1) however is like that on older Allwinner SoCs, such
> as the A10 or A20, but the N factor starts from 1 instead of 0.
> 
> This patch adds support for PLL1 and all the basic clock gates.
> 
> Signed-off-by: Chen-Yu Tsai <[email-masked]>
> ---
>  Documentation/devicetree/bindings/clock/sunxi.txt |  4 ++
>  drivers/clk/sunxi/clk-sunxi.c                     | 83 +++++++++++++++++++++++
>  2 files changed, 87 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index ae18ec1..fa927ba 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -9,6 +9,7 @@ Required properties:
>  	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
>  	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
>  	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
> +	"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
>  	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
>  	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
>  	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
> @@ -25,6 +26,7 @@ Required properties:
>  					      AHB1 on A31
>  	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
>  	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
> +	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
>  	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
>  	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
>  	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
> @@ -39,8 +41,10 @@ Required properties:
>  	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
>  	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
>  	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
> +	"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
>  	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
>  	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
> +	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
>  	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
>  	"allwinner,sun7i-a20-out-clk" - for the external output clocks
>  	"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index 89eadbc..1d16c0c 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -164,6 +164,54 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
>  }
>  
>  /**
> + * sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1
> + * PLL1 rate is calculated as follows
> + * rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
> + * parent_rate is always 24Mhz
> + */
> +
> +static void sun8i_a23_get_pll1_factors(u32 *freq, u32 parent_rate,
> +				   u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> +	u8 div;
> +
> +	/* Normalize value to a 6M multiple */
> +	div = *freq / 6000000;
> +	*freq = 6000000 * div;
> +
> +	/* we were called to round the frequency, we can now return */
> +	if (n == NULL)
> +		return;
> +
> +	/* m is always zero for pll1 */
> +	*m = 0;
> +
> +	/* k is 1 only on these cases */
> +	if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
> +		*k = 1;
> +	else
> +		*k = 0;
> +
> +	/* p will be 2 for divs under 20 and odd divs under 32 */
> +	if (div < 20 || (div < 32 && (div & 1)))
> +		*p = 2;
> +
> +	/* p will be 1 for even divs under 32, divs under 40 and odd pairs
> +	 * of divs between 40-62 */
> +	else if (div < 40 || (div < 64 && (div & 2)))
> +		*p = 1;
> +
> +	/* any other entries have p = 0 */
> +	else
> +		*p = 0;
> +
> +	/* calculate a suitable n based on k and p */
> +	div <<= *p;
> +	div /= (*k + 1);
> +	*n = div / 4 - 1;
> +}
> +
> +/**
>   * sun4i_get_pll5_factors() - calculates n, k factors for PLL5
>   * PLL5 rate is calculated as follows
>   * rate = parent_rate * n * (k + 1)
> @@ -422,6 +470,18 @@ static struct clk_factors_config sun6i_a31_pll1_config = {
>  	.mwidth = 2,
>  };
>  
> +static struct clk_factors_config sun8i_a23_pll1_config = {
> +	.nshift = 8,
> +	.nwidth = 5,
> +	.kshift = 4,
> +	.kwidth = 2,
> +	.mshift = 0,
> +	.mwidth = 2,
> +	.pshift = 16,
> +	.pwidth = 2,
> +	.n_from_one = 1,
> +};
> +
>  static struct clk_factors_config sun4i_pll5_config = {
>  	.nshift = 8,
>  	.nwidth = 5,
> @@ -472,6 +532,12 @@ static const struct factors_data sun6i_a31_pll1_data __initconst = {
>  	.getter = sun6i_a31_get_pll1_factors,
>  };
>  
> +static const struct factors_data sun8i_a23_pll1_data __initconst = {
> +	.enable = 31,
> +	.table = &sun8i_a23_pll1_config,
> +	.getter = sun8i_a23_get_pll1_factors,
> +};
> +
>  static const struct factors_data sun7i_a20_pll4_data __initconst = {
>  	.enable = 31,
>  	.table = &sun4i_pll5_config,
> @@ -812,6 +878,10 @@ static const struct gates_data sun7i_a20_ahb_gates_data __initconst = {
>  	.mask = { 0x12f77fff, 0x16ff3f },
>  };
>  
> +static const struct gates_data sun8i_a23_ahb1_gates_data __initconst = {
> +	.mask = {0x25386742, 0x2505111},
> +};
> +
>  static const struct gates_data sun4i_apb0_gates_data __initconst = {
>  	.mask = {0x4EF},
>  };
> @@ -844,6 +914,10 @@ static const struct gates_data sun6i_a31_apb1_gates_data __initconst = {
>  	.mask = {0x3031},
>  };
>  
> +static const struct gates_data sun8i_a23_apb1_gates_data __initconst = {
> +	.mask = {0x3021},
> +};
> +
>  static const struct gates_data sun6i_a31_apb2_gates_data __initconst = {
>  	.mask = {0x3F000F},
>  };
> @@ -852,6 +926,10 @@ static const struct gates_data sun7i_a20_apb1_gates_data __initconst = {
>  	.mask = { 0xff80ff },
>  };
>  
> +static const struct gates_data sun8i_a23_apb2_gates_data __initconst = {
> +	.mask = {0x1F0007},
> +};
> +
>  static const struct gates_data sun4i_a10_usb_gates_data __initconst = {
>  	.mask = {0x1C0},
>  	.reset_mask = 0x07,
> @@ -1122,6 +1200,7 @@ free_clkdata:
>  static const struct of_device_id clk_factors_match[] __initconst = {
>  	{.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,},
>  	{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
> +	{.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,},
>  	{.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,},
>  	{.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
>  	{.compatible = "allwinner,sun4i-a10-mod0-clk", .data = &sun4i_mod0_data,},
> @@ -1163,6 +1242,7 @@ static const struct of_device_id clk_gates_match[] __initconst = {
>  	{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,},
>  	{.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data = &sun7i_a20_ahb_gates_data,},
> +	{.compatible = "allwinner,sun8i-a23-ahb1-gates-clk", .data = &sun8i_a23_ahb1_gates_data,},
>  	{.compatible = "allwinner,sun4i-a10-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
>  	{.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
>  	{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
> @@ -1172,7 +1252,9 @@ static const struct of_device_id clk_gates_match[] __initconst = {
>  	{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
>  	{.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
> +	{.compatible = "allwinner,sun8i-a23-apb1-gates-clk", .data = &sun8i_a23_apb1_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
> +	{.compatible = "allwinner,sun8i-a23-apb2-gates-clk", .data = &sun8i_a23_apb2_gates_data,},
>  	{.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,},
>  	{.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-usb-clk", .data = &sun6i_a31_usb_gates_data,},
> @@ -1261,3 +1343,4 @@ static void __init sun6i_init_clocks(void)
>  			  ARRAY_SIZE(sun6i_critical_clocks));
>  }
>  CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks);
> +CLK_OF_DECLARE(sun8i_a23_clk_init, "allwinner,sun8i-a23", sun6i_init_clocks);

Ah, this is why you needed pll6 in the A31 array.

Why don't you just create a new array and init function for the A23?

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140525/d81c0b76/attachment.sig>