Subject: [PATCH 16/22] pinctrl: sunxi: Add A23 R_PIO controller support

From: [email-masked] (Maxime Ripard)
Date: Sun, 25 May 2014 21:11:28 +0200

On Fri, May 23, 2014 at 03:51:19PM +0800, Chen-Yu Tsai wrote:
> The A23 has a R_PIO pin controller, similar to the one found on the A31 SoC.
> Add support for the pins controlled by the R_PIO controller.
> 
> Signed-off-by: Chen-Yu Tsai <[email-masked]>
> ---
>  drivers/pinctrl/sunxi/Kconfig               |   4 +
>  drivers/pinctrl/sunxi/Makefile              |   1 +
>  drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c | 129 ++++++++++++++++++++++++++++
>  3 files changed, 134 insertions(+)
>  create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
> 
> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
> index 17a4281..3058d32 100644
> --- a/drivers/pinctrl/sunxi/Kconfig
> +++ b/drivers/pinctrl/sunxi/Kconfig
> @@ -36,4 +36,8 @@ config PINCTRL_SUN8I_A23
>         def_bool PINCTRL_SUNXI || MACH_SUN8I
>         select PINCTRL_SUNXI_COMMON
>  
> +config PINCTRL_SUN8I_A23_R
> +       def_bool PINCTRL_SUNXI || MACH_SUN8I

Like said in the previous patch, you can just depend on MACH_SUN8I
here.

> +       select PINCTRL_SUNXI_COMMON
> +
>  endif
> diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
> index 850cd50..e797efb 100644
> --- a/drivers/pinctrl/sunxi/Makefile
> +++ b/drivers/pinctrl/sunxi/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_SUN6I_A31)		+= pinctrl-sun6i-a31.o
>  obj-$(CONFIG_PINCTRL_SUN6I_A31_R)	+= pinctrl-sun6i-a31-r.o
>  obj-$(CONFIG_PINCTRL_SUN7I_A20)		+= pinctrl-sun7i-a20.o
>  obj-$(CONFIG_PINCTRL_SUN8I_A23)		+= pinctrl-sun8i-a23.o
> +obj-$(CONFIG_PINCTRL_SUN8I_A23_R)	+= pinctrl-sun8i-a23-r.o
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
> new file mode 100644
> index 0000000..ae17888
> --- /dev/null
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
> @@ -0,0 +1,129 @@
> +/*
> + * Allwinner A23 SoCs special pins pinctrl driver.
> + *
> + * Copyright (C) 2014 Chen-Yu Tsai
> + * Chen-Yu Tsai <[email-masked]>
> + *
> + * Copyright (C) 2014 Boris Brezillon
> + * Boris Brezillon <[email-masked]>
> + *
> + * Copyright (C) 2014 Maxime Ripard
> + * Maxime Ripard <[email-masked]>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2.  This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/reset.h>
> +
> +#include "pinctrl-sunxi.h"
> +
> +static const struct sunxi_desc_pin sun8i_a23_r_pins[] = {
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "s_rsb"),		/* SCK */
> +		  SUNXI_FUNCTION(0x3, "s_twi")),	/* SCK */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "s_rsb"),		/* SDA */
> +		  SUNXI_FUNCTION(0x3, "s_twi")),	/* SDA */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "s_uart")),	/* TX */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "s_uart")),	/* RX */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x3, "s_jtag")),	/* MS */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x3, "s_jtag")),	/* CK */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x3, "s_jtag")),	/* DO */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x3, "s_jtag")),	/* DI */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "s_twi")),	/* SCK */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "s_twi")),	/* SDA */
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out"),
> +		  SUNXI_FUNCTION(0x2, "s_pwm")),
> +	SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
> +		  SUNXI_FUNCTION(0x0, "gpio_in"),
> +		  SUNXI_FUNCTION(0x1, "gpio_out")),
> +};
> +
> +static const struct sunxi_pinctrl_desc sun8i_a23_r_pinctrl_data = {
> +	.pins = sun8i_a23_r_pins,
> +	.npins = ARRAY_SIZE(sun8i_a23_r_pins),
> +	.pin_base = PL_BASE,
> +};
> +
> +static int sun8i_a23_r_pinctrl_probe(struct platform_device *pdev)
> +{
> +	struct reset_control *rstc;
> +	int ret;
> +
> +	rstc = devm_reset_control_get(&pdev->dev, NULL);

Oh, and since you're using the reset framework, you should depends on
RESET_CONTROLLER.

> +	if (IS_ERR(rstc)) {
> +		dev_err(&pdev->dev, "Reset controller missing\n");
> +		return PTR_ERR(rstc);
> +	}
> +
> +	ret = reset_control_deassert(rstc);
> +	if (ret)
> +		return ret;
> +
> +	ret = sunxi_pinctrl_init(pdev,
> +				 &sun8i_a23_r_pinctrl_data);
> +
> +	if (ret)
> +		reset_control_assert(rstc);
> +
> +	return ret;
> +}
> +
> +static struct of_device_id sun8i_a23_r_pinctrl_match[] = {
> +	{ .compatible = "allwinner,sun8i-a23-r-pinctrl", },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, sun8i_a23_r_pinctrl_match);
> +
> +static struct platform_driver sun8i_a23_r_pinctrl_driver = {
> +	.probe	= sun8i_a23_r_pinctrl_probe,
> +	.driver	= {
> +		.name		= "sun8i-a23-r-pinctrl",
> +		.owner		= THIS_MODULE,
> +		.of_match_table	= sun8i_a23_r_pinctrl_match,
> +	},
> +};
> +module_platform_driver(sun8i_a23_r_pinctrl_driver);
> +
> +MODULE_AUTHOR("Chen-Yu Tsai <[email-masked]>");
> +MODULE_AUTHOR("Boris Brezillon <[email-masked]");
> +MODULE_AUTHOR("Maxime Ripard <[email-masked]");
> +MODULE_DESCRIPTION("Allwinner A23 R_PIO pinctrl driver");
> +MODULE_LICENSE("GPL");

Looks good otherwise, once these minor things are fixed, you have my
acked-by.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140525/cadcdc54/attachment-0001.sig>