Subject: [PATCH 4/4] ARM: dts: imx6qdl: Enable CODA960 VPU

From: [email-masked] (Shawn Guo)
Date: Wed, 18 Jun 2014 23:12:30 +0800

On Fri, Jun 13, 2014 at 07:14:01PM +0200, Philipp Zabel wrote:
> This patch adds links to the on-chip SRAM and reset controller nodes
> and switches the interrupts. Make the BIT processor interrupt, which exists on
> all variants, the first one. The JPEG unit interrupt, which does not exist on
> i.MX27 and i.MX5 thus is an optional second interrupt.
> Use different compatible strings for i.MX6Q/D and i.MX6S/DL, as they have to
> load separate firmware images for some reason.
> 
> Signed-off-by: Philipp Zabel <[email-masked]>

The whole series looks good to me.

Rob,

Do you want to apply the first patch through DT tree, or may I have your
ACK to take the whole series via IMX tree?

Shawn

> ---
>  arch/arm/boot/dts/imx6dl.dtsi  |  4 ++++
>  arch/arm/boot/dts/imx6q.dtsi   |  4 ++++
>  arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++--
>  3 files changed, 16 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
> index 5c5f574..fbbdfca 100644
> --- a/arch/arm/boot/dts/imx6dl.dtsi
> +++ b/arch/arm/boot/dts/imx6dl.dtsi
> @@ -110,3 +110,7 @@
>  		      "di0_sel", "di1_sel",
>  		      "di0", "di1";
>  };
> +
> +&vpu {
> +	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
> +};
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index addd3f8..2c1dbf8 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -291,3 +291,7 @@
>  		};
>  	};
>  };
> +
> +&vpu {
> +	compatible = "fsl,imx6q-vpu", "cnm,coda960";
> +};
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index eca0971..2052303 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -315,9 +315,15 @@
>  			};
>  
>  			vpu: vpu at 02040000 {
> +				compatible = "cnm,coda960";
>  				reg = <0x02040000 0x3c000>;
> -				interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
> -				             <0 12 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
> +				             <0 3 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-names = "bit", "jpeg";
> +				clocks = <&clks 168>, <&clks 168>;
> +				clock-names = "per", "ahb";
> +				resets = <&src 1>;
> +				iram = <&ocram>;
>  			};
>  
>  			aipstz at 0207c000 { /* AIPSTZ1 */
> -- 
> 2.0.0
>