Subject: [PATCH v3 2/8] spi: sun4i: add DMA support

From: [email-masked] (Maxime Ripard)
Date: Tue, 5 Aug 2014 22:23:54 +0200

Hi,

On Mon, Aug 04, 2014 at 05:09:56PM -0300, Emilio L?pez wrote:
> +	if (sun4i_spi_can_dma(master, spi, tfr)) {
> +		dev_dbg(&sspi->master->dev, "Using DMA mode for transfer\n");
> +
> +		if (sspi->tx_buf) {
> +			desc_tx = dmaengine_prep_slave_sg(sspi->tx_dma_chan,
> +					tfr->tx_sg.sgl, tfr->tx_sg.nents,
> +					DMA_TO_DEVICE,
> +					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +			if (!desc_tx) {
> +				dev_err(&sspi->master->dev,
> +					"Couldn't prepare dma slave\n");
> +				return -EIO;
> +			}
> +
> +			dmaengine_submit(desc_tx);
> +		}
> +
> +		if (sspi->rx_buf) {
> +			desc_rx = dmaengine_prep_slave_sg(sspi->rx_dma_chan,
> +					tfr->rx_sg.sgl, tfr->rx_sg.nents,
> +					DMA_FROM_DEVICE,
> +					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> +			if (!desc_rx) {
> +				dev_err(&sspi->master->dev,
> +					"Couldn't prepare dma slave\n");
> +				return -EIO;
> +			}
> +
> +			dmaengine_submit(desc_rx);
> +		}
> +
> +		/* Enable DMA requests */
> +		reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
> +		sun4i_spi_write(sspi, SUN4I_CTL_REG,
> +				reg | SUN4I_CTL_DMAMC_DEDICATED);
> +		sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG,
> +				SUN4I_DMA_CTL_TF_NOT_FULL |
> +				SUN4I_DMA_CTL_RF_READY);
> +
> +		dma_async_issue_pending(sspi->rx_dma_chan);
> +		dma_async_issue_pending(sspi->tx_dma_chan);

I guess the DMA levels setup and the issue pending calls could be
moved to the if statements above about wether the RX and TX buffers
are here or not.

> +	} else {
> +		dev_dbg(&sspi->master->dev, "Using PIO mode for transfer\n");
> +
> +		/* Disable DMA requests */
> +		reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
> +		sun4i_spi_write(sspi, SUN4I_CTL_REG,
> +				reg & ~SUN4I_CTL_DMAMC_DEDICATED);
> +		sun4i_spi_write(sspi, SUN4I_DMA_CTL_REG, 0);
> +
> +		/* Fill the TX FIFO */
> +		sun4i_spi_fill_fifo(sspi, SUN4I_FIFO_DEPTH);
> +	}
> +
>  	/* Start the transfer */
>  	reg = sun4i_spi_read(sspi, SUN4I_CTL_REG);
>  	sun4i_spi_write(sspi, SUN4I_CTL_REG, reg | SUN4I_CTL_XCH);
> @@ -286,7 +359,12 @@ static int sun4i_spi_transfer_one(struct spi_master *master,
>  		goto out;
>  	}
>  
> -	sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
> +	if (sun4i_spi_can_dma(master, spi, tfr) && desc_rx) {
> +		/* The receive transfer should be the last one to finish */
> +		dma_wait_for_async_tx(desc_rx);
> +	} else {
> +		sun4i_spi_drain_fifo(sspi, SUN4I_FIFO_DEPTH);
> +	}
>  
>  out:
>  	sun4i_spi_write(sspi, SUN4I_INT_CTL_REG, 0);
> @@ -351,6 +429,7 @@ static int sun4i_spi_runtime_suspend(struct device *dev)
>  
>  static int sun4i_spi_probe(struct platform_device *pdev)
>  {
> +	struct dma_slave_config dma_sconfig;
>  	struct spi_master *master;
>  	struct sun4i_spi *sspi;
>  	struct resource	*res;
> @@ -386,7 +465,10 @@ static int sun4i_spi_probe(struct platform_device *pdev)
>  		goto err_free_master;
>  	}
>  
> +	init_completion(&sspi->done);
>  	sspi->master = master;
> +	master->can_dma = sun4i_spi_can_dma;
> +	master->prepare_message = sun4i_spi_prepare_message;
>  	master->set_cs = sun4i_spi_set_cs;
>  	master->transfer_one = sun4i_spi_transfer_one;
>  	master->num_chipselect = 4;
> @@ -409,7 +491,45 @@ static int sun4i_spi_probe(struct platform_device *pdev)
>  		goto err_free_master;
>  	}
>  
> -	init_completion(&sspi->done);
> +	sspi->tx_dma_chan = dma_request_slave_channel_reason(&pdev->dev, "tx");
> +	if (IS_ERR(sspi->tx_dma_chan)) {
> +		dev_err(&pdev->dev, "Unable to acquire DMA channel TX\n");
> +		ret = PTR_ERR(sspi->tx_dma_chan);
> +		goto err_free_master;
> +	}
> +
> +	dma_sconfig.direction = DMA_MEM_TO_DEV;
> +	dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> +	dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> +	dma_sconfig.dst_addr = res->start + SUN4I_TXDATA_REG;
> +	dma_sconfig.src_maxburst = 1;
> +	dma_sconfig.dst_maxburst = 1;
> +
> +	ret = dmaengine_slave_config(sspi->tx_dma_chan, &dma_sconfig);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to configure TX DMA slave\n");
> +		goto err_tx_dma_release;
> +	}
> +
> +	sspi->rx_dma_chan = dma_request_slave_channel_reason(&pdev->dev, "rx");
> +	if (IS_ERR(sspi->rx_dma_chan)) {
> +		dev_err(&pdev->dev, "Unable to acquire DMA channel RX\n");
> +		ret = PTR_ERR(sspi->rx_dma_chan);
> +		goto err_tx_dma_release;
> +	}
> +
> +	dma_sconfig.direction = DMA_DEV_TO_MEM;
> +	dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> +	dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> +	dma_sconfig.src_addr = res->start + SUN4I_RXDATA_REG;
> +	dma_sconfig.src_maxburst = 1;
> +	dma_sconfig.dst_maxburst = 1;
> +
> +	ret = dmaengine_slave_config(sspi->rx_dma_chan, &dma_sconfig);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Unable to configure RX DMA slave\n");
> +		goto err_rx_dma_release;
> +	}
>  
>  	/*
>  	 * This wake-up/shutdown pattern is to be able to have the
> @@ -418,7 +538,7 @@ static int sun4i_spi_probe(struct platform_device *pdev)
>  	ret = sun4i_spi_runtime_resume(&pdev->dev);
>  	if (ret) {
>  		dev_err(&pdev->dev, "Couldn't resume the device\n");
> -		goto err_free_master;
> +		goto err_rx_dma_release;
>  	}
>  
>  	pm_runtime_set_active(&pdev->dev);
> @@ -436,6 +556,10 @@ static int sun4i_spi_probe(struct platform_device *pdev)
>  err_pm_disable:
>  	pm_runtime_disable(&pdev->dev);
>  	sun4i_spi_runtime_suspend(&pdev->dev);
> +err_rx_dma_release:
> +	dma_release_channel(sspi->rx_dma_chan);
> +err_tx_dma_release:
> +	dma_release_channel(sspi->tx_dma_chan);
>  err_free_master:
>  	spi_master_put(master);
>  	return ret;
> @@ -443,8 +567,17 @@ err_free_master:
>  
>  static int sun4i_spi_remove(struct platform_device *pdev)
>  {
> +	struct spi_master *master = platform_get_drvdata(pdev);
> +	struct sun4i_spi *sspi = spi_master_get_devdata(master);
> +
> +	if (pm_runtime_active(&pdev->dev))
> +		sun4i_spi_runtime_suspend(&pdev->dev);
> +

This doesn't really belong in this patch, please send a separate one.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20140805/523c6850/attachment.sig>