Subject: [PATCH V2 3/3] ARM: imx: source gpt per clk from OSC for system timer

From: [email-masked] (Shawn Guo)
Date: Wed, 10 Sep 2014 15:36:32 +0800

On Fri, Sep 05, 2014 at 11:26:46AM +0800, Anson Huang wrote:
> diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
> index bf92e5a..a3ecb4a 100644
> --- a/arch/arm/mach-imx/time.c
> +++ b/arch/arm/mach-imx/time.c
> @@ -60,17 +60,23 @@
>  #define MX2_TSTAT_CAPT		(1 << 1)
>  #define MX2_TSTAT_COMP		(1 << 0)
>  
> -/* MX31, MX35, MX25, MX5 */
> +/* MX31, MX35, MX25, MX5, MX6 */
>  #define V2_TCTL_WAITEN		(1 << 3) /* Wait enable mode */
>  #define V2_TCTL_CLK_IPG		(1 << 6)
>  #define V2_TCTL_CLK_PER		(2 << 6)
> +#define V2_TCTL_CLK_OSC_DIV8	(5 << 6)
> +#define V2_TCTL_CLK_OSC		(7 << 6)

This one is unused?

>  #define V2_TCTL_FRR		(1 << 9)
> +#define V2_TCTL_24MEN		(1 << 10)
> +#define V2_TPRER_PRE24M		12
>  #define V2_IR			0x0c
>  #define V2_TSTAT		0x08
>  #define V2_TSTAT_OF1		(1 << 0)
>  #define V2_TCN			0x24
>  #define V2_TCMP			0x10
>  
> +#define	V2_TIMER_RATE_OSC_DIV8	3000000

A space instead of tab should be used right after '#define'.

> +
>  #define timer_is_v1()	(cpu_is_mx1() || cpu_is_mx21() || cpu_is_mx27())
>  #define timer_is_v2()	(!timer_is_v1())
>  
> @@ -293,7 +299,7 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
>  static void __init _mxc_timer_init(int irq,
>  				   struct clk *clk_per, struct clk *clk_ipg)
>  {
> -	uint32_t tctl_val;
> +	uint32_t tctl_val, tprer_val;

The variable tprer_val does not seem really needed.

Shawn

>  
>  	if (IS_ERR(clk_per)) {
>  		pr_err("i.MX timer: unable to get clk\n");
> @@ -312,10 +318,26 @@ static void __init _mxc_timer_init(int irq,
>  	__raw_writel(0, timer_base + MXC_TCTL);
>  	__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
>  
> -	if (timer_is_v2())
> -		tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
> -	else
> +	if (timer_is_v2()) {
> +		if (((cpu_is_imx6q() && imx_get_soc_revision() >
> +			IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl() ||
> +			cpu_is_imx6sx()) && (clk_get_rate(clk_per) ==
> +			V2_TIMER_RATE_OSC_DIV8)) {
> +			tctl_val = V2_TCTL_CLK_OSC_DIV8 | V2_TCTL_FRR |
> +				V2_TCTL_WAITEN | MXC_TCTL_TEN;
> +			if (cpu_is_imx6dl() || cpu_is_imx6sx()) {
> +				/* 24 / 8 = 3 MHz */
> +				tprer_val = 7 << V2_TPRER_PRE24M;
> +				__raw_writel(tprer_val, timer_base + MXC_TPRER);
> +				tctl_val |= V2_TCTL_24MEN;
> +			}
> +		} else {
> +			tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR |
> +				V2_TCTL_WAITEN | MXC_TCTL_TEN;
> +		}
> +	} else {
>  		tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
> +	}
>  
>  	__raw_writel(tctl_val, timer_base + MXC_TCTL);
>  
> @@ -339,7 +361,7 @@ void __init mxc_timer_init(void __iomem *base, int irq)
>  
>  static void __init mxc_timer_init_dt(struct device_node *np)
>  {
> -	struct clk *clk_per, *clk_ipg;
> +	struct clk *clk_per, *clk_ipg, *clk_osc_per;
>  	int irq;
>  
>  	if (timer_base)
> @@ -352,6 +374,13 @@ static void __init mxc_timer_init_dt(struct device_node *np)
>  	clk_per = of_clk_get_by_name(np, "per");
>  	clk_ipg = of_clk_get_by_name(np, "ipg");
>  
> +	if ((cpu_is_imx6q() && imx_get_soc_revision() >
> +		IMX_CHIP_REVISION_1_0) || cpu_is_imx6dl()) {
> +		clk_osc_per = of_clk_get_by_name(np, "osc_per");
> +		if (!IS_ERR(clk_osc_per))
> +			clk_per = clk_osc_per;
> +	}
> +
>  	_mxc_timer_init(irq, clk_per, clk_ipg);
>  }
>  CLOCKSOURCE_OF_DECLARE(mx1_timer, "fsl,imx1-gpt", mxc_timer_init_dt);
> -- 
> 1.7.9.5
>