Subject: [PATCH v4 0/3] add power off driver for i.mx6

From: [email-masked] (Shawn Guo)
Date: Wed, 12 Nov 2014 18:56:22 +0800

On Wed, Nov 12, 2014 at 04:20:36PM +0800, Robin Gong wrote:
> Resend the patchset  with the latest MAINTAINERS
> Add simple power off driver for i.mx6, including:
> - add basic imx-snvs-poweroff driver in drivers/power/reset
> - add device node in all dts files of i.mx6.
> - enable in config file
> 
> Change from v3:
> - disable poweroff driver in soc level dts and enable it in board level dts
> - replace 'EIO' with 'ENODEV' while of_iomap fail.
> Change from v2:
> - remove useless included head files
> - split device binding doc from dts patch
> - add description for the case that PMIC_ON_REQ not used as external power
>   control
> 
> Robin Gong (3):
>   ARM: dts: imx6: add pm_power_off support for i.mx6 chips
>   power: reset: imx-snvs-poweroff: add power off driver for i.mx6
>   ARM: configs: imx_v6_v7_defconfig: add power off driver

I'm fine with the series.  But before I take the patches, I need an ACK
from DT folks on the bindings.

Shawn