Subject: [PATCH] ARM: dts: Fix dm816x pinctrl and syscon so they are children of SCM

From: [email-masked] (Tony Lindgren)
Date: Mon, 26 Jan 2015 18:02:55 -0800

From: Tony Lindgren <[email-masked]>
Date: Wed, 21 Jan 2015 16:21:52 -0800
Subject: [PATCH] ARM: dts: Fix dm816x pinctrl and syscon so they are children of SCM

Looks like I only got half done with moving pinctrl and syscon to
be children of the SCM. I've set up the FAPLL clocks that way already,
but did not complete the job as I copied the syscon values from
am33xx.dtsi.

To make sure the syscon mapping works, I've verfified that we can
set up davinci_emac mac address the same way as cpsw already does
with the syscon mapping. So let's add that too.

Cc: Brian Hutchinson <[email-masked]>
Signed-off-by: Tony Lindgren <[email-masked]>

--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -50,15 +50,6 @@
 		};
 	};
 
-	dm816x_pinmux: pinmux at 44e10800 {
-		compatible = "pinctrl-single";
-		reg = <0x48140800 0x50a>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-single,register-width = <16>;
-		pinctrl-single,function-mask = <0xf>;
-	};
-
 	/*
 	 * XXX: Use a flat representation of the dm816x interconnect.
 	 * The real dm816x interconnect network is quite complex. Since
@@ -89,12 +80,29 @@
 		};
 
 		scrm: scrm at 48140000 {
-			compatible = "ti,dm816-scrm";
+			compatible = "ti,dm816-scrm", "simple-bus";
 			reg = <0x48140000 0x21000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x48140000 0x21000>;
 
+			dm816x_pinmux: pinmux at 800 {
+				compatible = "pinctrl-single";
+				reg = <0x800 0x50a>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				pinctrl-single,register-width = <16>;
+				pinctrl-single,function-mask = <0xf>;
+			};
+
+			/* Device Configuration Registers */
+			scm_conf: syscon at 600 {
+				compatible = "syscon";
+				reg = <0x600 0x110>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
 			scrm_clocks: clocks {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -104,11 +112,6 @@
 			};
 		};
 
-		cm: syscon at 44e10000 {
-			compatible = "ti,am33xx-controlmodule", "syscon";
-			reg = <0x44e10000 0x800>;
-		};
-
 		edma: edma at 49000000 {
 			compatible = "ti,edma3";
 			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
@@ -213,6 +216,7 @@
 			reg = <0x4a100000 0x800
 			       0x4a100900 0x3700>;
 			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0>;
 			ti,davinci-ctrl-mod-reg-offset = <0x900>;
 			ti,davinci-ctrl-ram-offset = <0x2000>;
@@ -226,6 +230,7 @@
 			ti,hwmods = "emac1";
 			reg = <0x4a120000 0x4000>;
 			clocks = <&sysclk24_ck>;
+			syscon = <&scm_conf>;
 			ti,davinci-ctrl-reg-offset = <0>;
 			ti,davinci-ctrl-mod-reg-offset = <0x900>;
 			ti,davinci-ctrl-ram-offset = <0x2000>;